85.080.10 标准查询与下载
共找到 111 条与 相关的标准，共 8 页
Paper - Printing paper - Part 2: Technical delivery specifications for offset-paper, coated and uncoated, white
- ICS
- 85.080.10
- CCS
- Y32
- 发布
- 2002-06
- 实施
The document is valid for mass-produced printing papers, which are printed in different printing processes.#,,#
Paper - Printing paper - Part 1: General technical delivery specifications
- ICS
- 85.080.10
- CCS
- Y32
- 发布
- 2002-04
- 实施
The document is valid for coated and uncoated white mass-produced printing papers for the reel rotogravure.
Paper - Printing paper - Part 3: General technical delivery specifications for rotogravure paper, coated and uncoated, white
- ICS
- 85.080.10
- CCS
- Y32
- 发布
- 2002-04
- 实施
This test method will find use by parties concerned about the influence of common atmospheric pollutant gases on the permanence of the physical strength and optical properties of various printing and writing papers. The test will provide manufacturers, paper users and other interested parties with quantified rankings of paper stability that identify papers that are stable, moderately stable and unstable when exposed to common atmospheric pollutant gases over periods of time. The stability rankings may be used for definition of the stability of paper to pollutant gas exposure, but will not define specific periods of life expectancy, as the limits of acceptable physical strength and optical properties will be different for various users of a given paper.1.1 This test method describes a laboratory procedure for the exposure of printing and writing paper to common atmospheric pollutant gas at elevated levels of concentration to permit accelerated aging of such paper. 1.2 This test method specifies the sample preparation and conditions of exposure required to obtain information on the relative stability of paper with regard to change in mechanical strength and optical properties brought about by exposure of such paper to common atmospheric pollutant gas. 1.3 This test method provides qualitative results regarding paper stability and does not define the exact life expectancy for a given paper to reach a specified set of strength or optical properties. The limit(s) of acceptability for a specified set of properties must be defined by each end user and will determine the life expectancy of the paper to be tested. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus
- ICS
- 85.080.10
- CCS
- Y33
- 发布
- 2002
- 实施
1.1 This specification covers pads of repositionable, colored, note paper. Each sheet has a strip of pressure-sensitive adhesive on the back side. 1.2 The values stated in either SI or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently, without combining values in any way. 1.3 The following safety hazards caveat pertains only to Section 14, Performance Requirements. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Repositionable Note Pad
- ICS
- 85.080.10
- CCS
- A14
- 发布
- 2002
- 实施
This test method will find use by parties concerned with the relative level of physical strength stability over time of various printing and writing papers. The test will provide manufacturers, paper users and other interested parties with rankings of paper stability that identify papers that will be stable and those that will be unstable when aged under normal conditions of use and handling over time. The stability rankings may be used for definition of the stability of a given printing and writing paper to aging over time when subjected to reasonable conditions of use and handling. These rankings will not define specific periods of life expectancy, as the limit of mechanical strength property acceptability will be different for various users of a given paper.1.1 This test method describes a laboratory procedure for accelerating the aging of printing and writing paper within sealed glass tubes through exposure to elevated temperature within an oven. 1.2 This test method applies to all types of printing and writing paper whether it is plain base paper, has internal additives, is coated, is printed or contains any variants of printing and writing paper found in normal usage. 1.3 This test method specifies the sample preparation and conditions of exposure required to obtain information on the stability of paper to aging with regard to changes in mechanical strength properties brought about by exposure of such paper to elevated temperature. 1.4 This test method provides the means to compare the stability of different papers on a relative basis, but does not attempt to project the exact life expectancy for a given paper. Life expectancy depends in large part on the limits of acceptability beyond which various paper properties are no longer useful, as defined by end-users. For a given paper, those limits will be different for different end-users. This test method does not provide a means to measure or to calculate such life expectancy. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
- ICS
- 85.080.10
- CCS
- Y33
- 发布
- 2002
- 实施
This document describes requirements for self-copying papers which will be used for continous forms. Grammage 40-g/m to 90 g/m.
Papers for data processing - 40-g/m<(hoch)2> to 90 g/m<(hoch)2> paper for continuous forms - Part 2: Self-copying properties; test methods
- ICS
- 85.080.10
- CCS
- Y32;L64
- 发布
- 2000-04
- 实施
This International Standard specifies a method for the measurement of curl in cut-size office papers. The test method would typically be used in evaluating papers of the type desc ribed in ISO 216. This method is limited to papers with a maximum dimension of 300 mm in both directions. The measurement may be made on papers as received, after conditioning, or after processing in a copier or printing device.
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets
- ICS
- 85.080.10
- CCS
- Y30
- 发布
- 2000-02-15
- 实施
- 2000-02-15
This International Standard specifies a method for the measurement of curl in cut-size office papers. The test method would typically be used in evaluating papers of the type desc ribed in ISO 216. This method is limited to papers with a maximum dimension of 300 mm in both directions. The measurement may be made on papers as received, after conditioning, or after processing in a copier or printing device.
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets
- ICS
- 85.080.10
- CCS
- Y30
- 发布
- 2000-02-15
- 实施
- 2000-02-15
This standard specifies requirements for uncoated paper, for reel fed conversion and/or printing of continuous stationary into continuous forms.
Paper - Printing and business paper - Requirements for continuous stationery
- ICS
- 85.080.10
- CCS
- 发布
- 1999-12-08
- 实施
- 1999-06-30
This European Standard specifies requirements for uncoated paper, for reel fed conversion and/or printing of continuous stationery into continuous forms. It does not include specific requirements for non-impact printing, which shall be agreed between supplier and customer.
Paper - Printing and business paper - Requirements for continuous stationery
- ICS
- 85.080.10
- CCS
- Y31
- 发布
- 1999-10-15
- 实施
- 1999-10-15
The document specifies requirements for uncoated paper, for reel fed conversion and/or printing of continuous stationary into continuous forms. It does not include specific requirements for non impact printing, which shall be agreed between supplier and customer.
Paper - Printing and business paper - Requirements for continuous stationery; German version EN 12858:1999
- ICS
- 85.080.10
- CCS
- Y31
- 发布
- 1999-06
- 实施
This International Standard specifies a method for the measurement of curl in cut-size office papers. The test method would typically be used in evaluating papers of the type described in ISO 216. This method is limited to papers with a maximum dimension of 300 mm in both directions. The measurement may be made on papers as received, after conditioning, or after processing in a copier or printing device.
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets
- ICS
- 85.080.10
- CCS
- Y32;Y31
- 发布
- 1999-03
- 实施
Paper - Envelope paper - Requirements, test methods
- ICS
- 85.080.10
- CCS
- Y32
- 发布
- 1998-09
- 实施
The document specifies the sizes of envelopes. It shows examples for current enclosure sizes. By the selection of sizes made the number of different formats shall be widely restricted.
Envelopes - Part 1: Sizes
- ICS
- 85.080.10
- CCS
- M83
- 发布
- 1998-01
- 实施
Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 2: Coated, treated, self copying; requirements, test method
- ICS
- 85.080.10
- CCS
- L64
- 发布
- 1997-07
- 实施
Testing after this document serves for the assessment of friction from paper against paper or against another friction partner under defined conditions.
Testing of paper and board - Determination of friction - Part 1: Record method for data processing papers
- ICS
- 85.080.10
- CCS
- Y30
- 发布
- 1997-07
- 实施
This document describes requirements and test methods for paper which can be used in the field of data processing, e.g. document reader sorter, scanner, etc. It is applicable for 90-g/m paper.#,,#
Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test requirements
- ICS
- 85.080.10
- CCS
- L64
- 发布
- 1997-07
- 实施
Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 2: coated, treated, self copying; requirements, test method
- ICS
- 85.080.10
- CCS
- L64
- 发布
- 1997-07
- 实施
This document describes requirements and test methods for paper which can be used in the field of data processing, e.g. document reader sorter, scanner, etc. It is applicable for 65- bis 85-g/m paper.#,,#
Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test method
- ICS
- 85.080.10
- CCS
- L64
- 发布
- 1997-07
- 实施
