87.020 涂料涂覆工艺 标准查询与下载

KS M ISO 12944-5-2023 色漆和清漆防护涂料体系对钢结构的腐蚀防护第5部分:防护涂料体系

Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems

ASTM D1732-03(2023) 涂装用镁合金表面处理的标准实施规程

Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

T/CECS 1425-2023 智慧能源区域应用规划与评价标准

本标准共分6章，主要内容包括：总则、术语、需求预测与资源分析、智慧能源区域规划、智慧能源管理平台、智慧能源区域应用系统评价。

Smart energy regional application planning and evaluation standards

T/SHDSGY 212-2023 特种合成树脂表面处理工艺

本文件规定了特种合成树脂表面处理工艺的术语和定义、工艺流程、技术要求、试验方法和质量验收。 本文件适用于金属、陶瓷表面的涂层处理。

Surface treatment process of special synthetic resin

ASTM D5531-17(2023) 涂层颜色和几何外观物理产品标准的制备、维护和分发的标准指南

Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

ASTM D8163-18(2023) 建筑、船舶、维修、商业和工业涂料用着色剂和基底强度测定的标准试验方法

Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings

DB41/T 2432-2023 石窟寺石刻类文物拓印技术规范

Technical Specifications for Rubbing of Stone Carved Cultural Relics in Grotto Temples

ASTM D3260-01(2023) 挤压铝产品上工厂应用的透明涂层的耐酸性和耐砂浆性的标准测试方法

Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

ASTM D5066-91(2023) 汽车油漆喷涂生产条件下测定转移效率的标准试验方法 基于重量

Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

T/SCDA 132-2023 HB建筑气凝胶保温隔热涂料系统应用技术标准

太阳光反射比和近红外反射比达到了JG/T 235的最高等级

Application technical standard of HB building airgel thermal insulation coating system

ASTM D4228-05(2023) 钢表面涂层涂敷器评定的标准实施规程

1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces including those in safety-related areas in a nuclear facility. 1.2 Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications. 1.3 Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in 4.1. Reports shall be prepared as specified in Section 5, and certification as specified in Section 6. 1.4 It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

ASTM D4227-05(2023) 混凝土表面涂层涂敷器的评定标准实施规程

1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to concrete surfaces including those in safety-related areas in a nuclear facility. 1.2 Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance. It is not the intent of this practice to mandate a singular basis for all qualifications. 1.3 Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in 4.1. Reports shall be prepared as specified in Section 5, and qualification as specified in Section 6. 1.4 It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

T/GDEIA 20-2023 镭射电化铝热烫印箔涂料

规定了镭射电化铝热烫印箔涂料的理化性能、重金属元素含量、涂层性能、检验方法、检验规则、标志、包装、运输和贮存等技术内容。

Laser Hot Stamping Foil Coating

T/CECS 1284-2023 绿色智能居家养老系统设计标准

本标准共分8章，主要内容包括：总则、术语、基本规定、系统架构、智能终端层、数据采集运算层、系统平台层、应用服务层。

Design Standards for Green Smart Home Elderly Care System

T/HEBQIA 144-2023 食品级环氧树脂涂料施工规范

本文件规定了食品级环氧树脂涂料施工规范的材料分类、施工要求、安全与环保、检验与验收、涂膜修补。

Construction specification of food grade epoxy resin coating

ASTM D6491-09(2023) 干热试验中预应力预涂金属耐老化性评估的标准实施规程

1.1 This practice can be used to evaluate the resistance of a prestressed prepainted metal panel to cracking, or loss of adhesion, or both, after accelerated heat aging. Most coil coated products are formed and bent into specific shapes to produce a final product. These operations introduce stresses, which may be relieved by cracking of the coating after aging. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

T/QGCML 651-2023 塑料表面喷涂加工通用要求

本标准规定了塑料表面喷涂加工通用要求的术语和定义、表面处理、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于塑料表面喷涂加工技术的设计及检验。      

General requirements for plastic surface spraying

ASTM D2454-23 测定过烘烤对有机涂层影响的标准实施规程

1.1 This practice covers the determination of the timetemperature effect of overbaking on the physical and chemical properties of organic coatings. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining the Effect of Overbaking on Organic Coatings

ASTM D5324-16(2022) 水性建筑涂料试验指南

1.1 This guide covers the selection and use of procedures for testing water-borne coatings to be used on exterior, interior or both types of surfaces (Note 1). The properties that can be examined or, in some cases, the relevant test procedures are listed in Table 1 and Table 2. NOTE 1—The term “architectural coating” as used here combines the definition in Terminology D16 with that in the FSCT Paint/Coatings Dictionary, 2 as follows: “Organic coatings intended for on-site application to interior or exterior surfaces of residential, commercial, institutional, or industrial buildings, in contrast to industrial coatings. They are protective and decorative finishes applied at ambient temperatures. Often called Trade Sales Coatings.” NOTE 2—Architectural coatings that are designed to give better performance than most conventional coatings because they are tougher and more stain and abrasion resistant are covered by Guide D3730. 1.2 The types of organic coatings covered by this guide are as follows: (1) Type 1 Interior Latex Flat Wall Paints, (2) Type 2 Exterior Latex House Paints, (3) Type 3 Water-Borne Floor Paints, and (4) Type 4 Interior Latex Semigloss and Gloss Paints. 1.2.1 Each is intended for application by brushing, rolling, spraying or other means to the material appropriate for its type, which may include plaster, masonry, wallboard, wood, steel, previously painted surfaces, and other architectural substrates. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Testing Water-Borne Architectural Coatings

KS M ISO 15741:2022 色漆和清漆.非腐蚀性气体用陆上和海上钢质管道内部的减摩涂层

Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases