87.060.99 其他涂料配料 标准查询与下载

T/QGCML 2869-2023 汽车底漆用纤维状浅色导电粉末

本文件规定了汽车底漆用纤维状浅色导电粉末的术语和定义、分类和代号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于利用半导体掺杂处理和特殊的表面处理技术在针状二氧化钛核体表面包覆一层均匀致密的导电薄膜制得的用于汽车底漆的纤维状浅色导电粉末。

Fibrous light-colored conductive powder for automotive primers

KS M ISO 4619-2023 色漆和清漆用干燥剂

Driers for paints and varnishes

ASTM D564-87(2023) 液体涂料干燥剂的标准试验方法

Standard Test Methods for Liquid Paint Driers

ASTM D3988-05(2023) 用 EDTA 法测定油漆干燥剂中钒的标准测试方法

Standard Test Method for Vanadium in Paint Driers by EDTA Method

ASTM D3970-05(2023) 通过氧化测定法测定油漆干燥剂中的铈的标准测试方法

Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

ASTM D2613-01(2023) 用 EDTA 法测定油漆干燥剂中钙或锌的标准测试方法

Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

T/SHDSGY 007-2022 一次性PVC手套涂饰剂

本文件规定了一次性PVC手套涂饰剂的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以水性聚氨酯、二氧化硅消光粉、有机硅助剂、丙烯酸树脂乳液、纯水为主要成分生产的一次性PVC手套涂饰剂。

Disposable PVC glove coating agent

T/HEBQIA 114-2022 醇酸漆稀释剂

本文件规定了醇酸漆稀释剂的产品要求、试验方法、检验规则、标志、包装和贮存。

Alkyd thinner

T/HBAS 009-2022 造纸涂料用保水剂性能试验方法

本标准规定了造纸涂料用保水剂性能指标的实验方法，本标准主要技术内容有：涂料保水值、涂料粘度、涂料固含量、涂料pH值四个指标。

Test method for properties of water retaining agent for paper coating

KS M ISO 8623:2021 色漆和清漆用塔尔油脂肪酸.试验方法和特征值

Tall-oil fatty acids for paints and varnishes —Test methods and characteristic values

KS M ISO 8623-2021 色漆和清漆用塔尔油脂肪酸.试验方法和特征值

Tall-oil fatty acids for paints and varnishes —Test methods and characteristic values

T/ZZB 2395-2021 玻璃烤漆用水溶性合成树脂

本文件规定了玻璃烤漆用水溶性合成树脂的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺等要求。 本文件适用于玻璃烤漆用水性改性环氧树脂。

Water-soluble synthetic resin for glass baking paint

GSO ISO 8623:2021 油漆和清漆用妥尔油脂肪酸 试验方法和特性值

ISO 8623:2015 specifies test methods and gives information on characteristic values for distilled tall-oil fatty acids for paints and varnishes.

Tall-oil fatty acids for paints and varnishes — Test methods and characteristic values

GSO ISO 4619:2021 油漆和清漆干燥剂

This document specifies the requirements and the corresponding test methods for driers for paints, varnishes and related products. It applies to driers in the solid or liquid form. It does not apply to emulsifiable driers.

Driers for paints and varnishes

ASTM D3804-02(2021) EDTA法测定油漆干燥剂中铁的标准试验方法

1.1 This test method covers the titrimetric determination of iron in liquid iron driers soluble in isopropyl alcohol and utilizes the disodium salt of ethylenediaminetetraacetic acid dihydrate (EDTA). 1.2 This test method is limited to the determination of the iron content of a liquid drier that does not contain other drier elements. This method is not applicable to drier blends. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Iron in Paint Driers by EDTA Method

ASTM D964-03(2020) 用于防污涂料的金属铜粉的标准规格

1.1 This specification covers copper powder for use in antifouling paints. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Metallic Copper Powder for Use in Antifouling Paints

T/SHCDA 000002-2020 三羟甲基丙烷三[3-(2-甲基氮丙啶基)丙酸酯]

本标准规定了三羟甲基丙烷三[3-(2-甲基氮丙啶基)丙酸酯]的技术要求及管理方法，包括：技术要求、试验方法、检测规则、标志、包装、运输和贮存。

Trimethylolpropane tris(2-methyl-1-azirdine) propionate

ASTM D267-82(2020) 金青铜粉标准规格

1.1 This specification covers the materials commercially known as gold bronze, pale gold bronze, and rich gold bronze powders. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Gold Bronze Powder

ASTM D3989-01(2019)e1 用EDTA法测定涂料烘干机中稀土金属总量的标准试验方法

1.1 This test method covers the titrimetric determination of rare earth metals in liquid rare earth metal driers and utilizes the disodium salt of ethylenediaminetetraacetic acid dihydrate (EDTA). 1.2 This test method is limited to the determination of the rare earth metal content of a liquid rare earth metal drier that does not contain other drier elements. The method is not applicable to drier blends. 1.3 This test method has been tested in concentrations of 6 % cerium and 6 % rare earth metals, but there is no reason to believe that it is not suitable for higher or lower drier metal concentrations provided specimen size is adjusted accordingly. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

T/YTQB 0002-2019 油漆用色浆

表1　技术要求 项    目　性能指标 容器中状态　搅拌混合后无硬块，呈均匀状态 不挥发物含量/%                                                    ≥　40 细度/μm                                                          ≤　60 干燥时间/h  表干                                                             ≤  实干                                                             ≤　 5 24 遮盖力/（g/m2）                                                   ≤　100 表1 技术要求（续） 项    目　性能指标 耐盐水性（3%NaCl）                                                           　24h无异常 重金属质量分数/(mg/kg)　汞（以总汞计）/mg/kg                   ≤　300 　铬（以总铬计）/mg/kg                   ≤　500 　镉（以总镉计）/mg/kg             ≤　300 　铅（以总铅计）/mg/kg             ≤　500

color paste for paint