91.010.20 合同方面 标准查询与下载

ANSI/ACCA 5QI Addendum-2010 HVAC质量安装规范

HVAC Quality Installation Specification

ASTM E2168-10(2016) 建筑施工估算中津贴, 应急费用以及备用款项的标准分类

4.1 When preparing construction, project, and program cost estimates, it is often necessary to make monetary provision for change or risk, or both, or other exigencies where information is incomplete. 4.2 Such allowance, contingency or reserve sums are employed by many persons engaged in the planning, delivery, and financing of construction work. 4.3 These users include owners, developers, facilities programmers, cost planners, estimators, schedules, architects and engineers, specification writers, operating and maintenance staff, manufacturers, educators, financial managers, and comptrollers. 4.4 Usage:  4.4.1 These sums are especially appropriate when performing the following activities: Cost budgeting; Conceptual, design, and construction cost estimating; Preparing complete forecast cost for economic evaluation, 8199;investment analysis, and approval; and Controlling cost during planning, design, and construction. 4.4.2 In any of these activities a needed requirement, or component, of the planned construction can be known while the defined solution, design or specification, for providing this may not. The usual, and appropriate, response in these situations, is the inclusion of a monetary sum, within an estimate, to provide for this (these) requirement(s). 4.4.3 Such sums may be general or specific in scope, may be planned to be spent or may only be included as possible mitigation for unplanned events and requirements. 4.4.4 To distinguish between these sums, and in recognition of their differing purpose, they are described, and classified here, using the terms allowance, contingency, or reserve. Note 1: Section 5 includes a generic statement of purpose for each of the three terms and provides a sub-classification that distinguishes between sums included for specific purposes and for non-specific, that is, general purposes. In cost budgeting, conceptual and design estimating especially, an estimator may intuitively recognize the need for a general purpose sum. This recognition comes in the absence of any known specific requirement other than the need to ensure the estimate total is a reasoned forecast of a reasonable bid result.

Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating

ANSI/ACCA 5QI-2010 HVAC质量安装检修规程

HVAC Quality Installation Specification

NF P03-001/A1:2009 私人契约.典型规范.用于建筑工程的私人契约的合同规程

Private contracts - Typical specifications - Contract procedure for building works, private contracts.

DIN 276-4:2009 建筑成本 第4部分:民用建筑

Building costs - Part 4: Civil constructions

DIN 276-1:2008 建筑成本.第1部分:建筑结构

This part of the standard deals with cost planning in building construction, in particular with the identification and classification of costs. It covers the direct costs of work performed for the new construction, conversion and modernization of buildings as well as the indirect costs involved; see DIN 18960 for specifications relating to the running costs of buildings. The standard defines terms to be used in cost planning; it specifies the distinctive features of costs, thus providing a basis on which comparisons of the results of such cost planning may be undertaken. Cost data identified in accordance with this standard may, when used for other purposes (e.g. payment of contractor's work, tax relief applications), be taken as input data for the necessary calculations. However, an evaluation of costs in terms of the relevant regulations lies outside the scope of this standard.

Building costs - Part 1: Building construction

NS 8415-2008 关于建筑和土木工程施工执行转包合同的挪威合同

Norwegian contract for sub-contracts concerning the execution of building and civil engineering works

NS 8405-2008 挪威建筑和土木工程合同

Norwegian building and civil engineering contract

NS 8416-2008 关于建筑和土木工程施工执行转包合同的简化挪威合同

Simplified Norwegian contract for sub-contracts concerning the execution of building and civil engineering works

DIN 18960:2008 建筑的用户成本

User costs of buildings

SNI 2839-2008 大楼与住宅建筑天花板施工单位价格计算过程

Code for unit price calculation of ceiling work for housing and building construction

SNI 2835-2008 大楼与住宅建筑土板施工单位价格计算过程

Code for unit price calculation of land work for housing and building

SNI 2837-2008 大楼与住宅建筑粉墙施工单位价格计算过程

Code for unit price calculation of cement covering work for housing and building construction

SNI 6897-2008 大楼与住宅建筑墙壁施工单位价格计算过程

Code for unit price calculation of masonry work for building and housing construction

SNI 2836-2008 大楼与住宅建筑地基施工单位价格计算过程

Code for unit price calculation of fondation work for housing and building construction

SNI 3434-2008 大楼与住宅建筑木具工程单位价格计算过程

Code for unit price calculation of wood work for housing and building construction

SNI 7394-2008 高楼与住宅建筑墙壁与地板混凝土施工单位价格计算过程

Code for unit price calculation of concrete work for housing and building construction

SNI 7395-2008 高楼与住宅建筑墙壁与地板施工单位价格计算过程

Code for unit price calculation of floor covering work and masonry work for housing and building construction

SNI 7393-2008 高楼与住宅建筑墙壁与地板铁铝施工单位价格计算过程

Code for unit price calculation for iron and alluminium work for housing and building construction

DIN 276-1 Berichtigung 1:2007 建筑物成本.第1部分:建筑物结构.对DIN 276-1-2006勘误

The project specifies the ascertainment and structure of costs for areas of construction. Included are the costs of construction, alteration and modernisation of buildings as well as other related costs. It defines terminology and distinguishing features and this provides the presumptions for the comparison of results of cost ascertainments, which are based upon results of planning and ingineering.

Building costs - Part 1: Building construction, Corrigenda to DIN 276-1:2006-11