91.010.20 合同方面 标准查询与下载

DIN 18351:2006 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).后面通风的幕墙工程

1.1 This standard deals with the workmanship of back-ventilated curtain walling used to cover walls, suppors, balustrades, parapets and the soffits of covered thoroughfares, balconies, cantilevers and the like. 1.2 This standard does not cover the following: -the workmanship of back-ventilated walling made from natural or cast stone with a nominal thickness of at least 30 mm (cf. DIN 18332 and DIN 18333); -the workmanship of claddings made from timber boards or planks or wood shingles (see DIN 18334); -the workmanship of claddings from roof-covering materials (cf. DIN 18338); -the making of metallic wall cladding units on site (cf. DIN 18339); -the installation of external thermal insulation composite systems (cf. DIN 18345); -the making of timber and plastics cladding units on site (cf. DIN 18355). 1.3 Clauses 1 to 5 of DIN 18299 shall also apply. In cases where the specifications of DIN 18299 contradict the present standard, the latter shall take precedence.

German construction contract procedures - Part C: General technical specifications for building works - Ventilated curtain walling

DIN 18352:2006 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).墙面砖和地面砖

1.1 This standard deals with the installation of ceramic tiling and mosaics, as well as of Solnhofen stone tiles, natural stone tiles, natural stone mosaics and natural stone one-quarter tiles. 1.2 This standard does not cover the installation of slabs made from natural stone (cf. DIN 18332) or from cast stone (cf. DIN 18333). 1.3 Clauses 1 to 5 of DIN 18299 shall also apply. In cases where the specifications of DIN 18299 contradict the present standard, the latter shall take precedence.

German construction contract procedures - Part C: General technical specifications for building works - Tile laying works

DIN 18353:2006 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).地板找平层敷设

1.1 This standard deals with the laying of screed on floors. 1.2 This standard does not cover the laying of fabricated screed and the construction of dry floors (cf. DIN 18340), nor the hot application of mastic asphalt screed (cf. DIN 18354). 1.3 Clauses 1 to 5 of DIN 18299 shall also apply. In cases where the specifications of DIN 18299 contradict the present standard, the latter shall take precedence.

German construction contract procedures - Part C: General technical specifications for building works - Floor screed works

DIN 18354:2006 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).敷沥青作业

1.1 This standard specifies requirements relating to the laying of mastic asphalt screed as specified in the DIN 18560 and DIN 28052 series of standards, the use of waterproofing combined with mastic asphalt to DIN 18195-5, and the use of mastic asphalt to protect waterproofing as specified in DIN 18195-10, and to the preparation of impervious mastic asphalt coatings and linings of tanks or containers in contact with water polluting agents. 1.2 This standard does not cover work involving surfacings on roads or road surfacings on bridges (cf. DIN 18317), even though these may be made of mastic asphalt, or revetment work (cf. DIN 18310). 1.3 Clauses 1 to 5 of DIN 18299 shall also apply. In cases where the specifications of DIN 18299 contradict the present standard, the latter shall take precedence.

German construction contract procedures - Part C: General technical specifications for building works - Asphalt flooring works

DIN 1960:2006 建筑工程承包条例.第A部分:建筑工程合同条款总则

Contract procedures for building works - Part A: General directions of contract letting for building works

ASTM E964-06(2010) 建筑物和建筑物系统的效益与成本和节约与投资比率的测算的标准操作规程

The BCR and SIR provide measures of economic performance in a single number that indicates whether a proposed building or building system is preferred over a mutually exclusive alternative that serves as the base for computing the ratio. It may be contrasted with the life-cycle cost (LCC) method that requires two LCC measures to evaluate the economic performance of a building or building systemone for each alternative. The ratio indicates discounted dollar benefits (or savings) per dollar of discounted costs. The BCR or SIR can be used to determine if a given building or building system is economic relative to the alternative of not having it. The BCR or SIR computed on increments of benefits (or savings) and costs can be used to determine if one design or size of a building or system is more economic than another. The BCR or SIR can be used as an aid to select the economically efficient set of projects among many competing for limited funding. The efficient set of projects will maximize aggregate net benefits or net savings obtainable for the budget. 1.1 This practice covers a procedure for calculating and interpreting benefit-to-cost ratios (BCR) and savings-to-investment ratios (SIR) as an aid for making building-related decisions. 1.2 A basic premise of the BCR and SIR methods is that future as well as present benefits and costs arising from a decision are important to that decision, and, if measurable in dollars, should be included in calculating the BCR and SIR. 1.3 Dollar amounts used to calculate BCR and SIR are all discounted, that is, expressed in time-equivalent dollars, either in present value or uniform annual value terms.

Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

ASTM E1057-06(2010) 测算建筑物和建筑系统投资的内在回报率和调整的内在回报率的标准操作规程

The IRR method has been used traditionally in finance and economics to measure the percentage yield on investment. The IRR method is appropriate in most cases for evaluating whether a given building or building system will be economically efficient, that is, whether its time-adjusted benefits will exceed its time-adjusted costs over the period of concern to the decision maker. However, it has deficiencies that limit its usefulness in choosing among projects competing for a limited budget. The AIRR method is a measure of the overall rate of return that an investor can expect from an investment over a designated study period. It is appropriate both for evaluating whether a given building or building system will be economically efficient and for choosing among alternatives competing for a limited budget. The AIRR method overcomes some, but not all, of the deficiencies of the IRR. The AIRR is particularly recommended over the IRR for allocating limited funding among competing projects.1.1 This practice covers a procedure for calculating and interpreting the internal rate of return (IRR) and adjusted internal rate of return (AIRR) measures in the evaluation of building designs, systems, and equipment.

Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

NS 8405-2004 挪威建筑和土木工程合同

Norwegian building and civil engineering contract

AS 4920:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Sets out general conditions of contract for maintenance and other services, and intended to be used where services are generally performed on the premises of the Principal and a Principal's representative is used. Part of a suite based on AS 4000-1997 (W

General conditions of contract for the provision of asset maintenance and services (Principal's version)

AS 4919:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Sets out general conditions of contract for maintenance and other services, and intended to be used where services are generally performed on the premises of the Principal and are administered through a Superintendent. Part of a suite based on AS 4000-19

General conditions of contract for the provision of asset maintenance and services (Superintendent's version)

AS 4917:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Sets out general conditions of contract for a construction management trade contract, to be used for trade works. This practical trade document is part of a suite of conditions of contract based on AS 4000-1997.

Construction management trade contract - General conditions

AS 4921:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Sets out a short version of general conditions of contract for maintenance and other services, as part of a suite based on AS 4000-1997 (See also AS 4919 and AS 4920). Intended to be used where services are generally performed on the premises of the Prin

General conditions of contract for the provision of asset maintenance and services (Short version)

DIN 18321:2002 建筑工程合同.第C部分:建筑工程的一般技术规范.喷射灌浆工程

The document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in jet grouting works.

Contract procedures for building works - Part C: General technical specifications for building works; Jet grouting works

DIN 18336:2002 建筑工程合同.第C部分:建筑工程通用技术规范.防水工程

The document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in water-proofing works.

Contract procedures for building works - Part C: General technical specifications for building works; Water-proofing works

DIN 18339:2002 建筑工程合同.第C部分:建筑工程通用技术规范.冷作工

This document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in sheet metal works.

Contract procedures for building works - Part C: General technical specifications for building works; Sheet metal works

DIN 18360:2002 建筑工程合同.第C部分:建筑工程通用技术规范.金属结构工程

This document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in metal construction and locksmith works.

Contract procedures for building works - Part C: General technical specifications for building works; Metal construction works

DIN 18382:2002 建筑工程合同.第C部分:建筑工程通用技术规范.标称电压不超过36kV的低压设备和中压设备

Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and medium-voltage installation with nominal voltages up to including 36 kV

DIN 18385:2002 建筑工程合同.第C部分:建筑工程通用技术规范.输送设备、电梯、自动扶梯和自动人行道

The document specifies the contract conditions which apply with regard to materials, workmanship, ancillary labours and invoicing for the construction and installation of conveying appliances, lifts, escalators and moving walkways.

Contract procedures for building works - Part C: General technical specifications for building works - Conveying installations, lifts, escalators and moving walkways

DIN 18309:2002 建筑工程合同.第C部分:建筑工程通用技术规范.灌浆工程

This document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in grouting works.

Contract procedures for buildings works - Part C: General technical specifications for building works; Grouting works

DIN 18312:2002 建筑工程合同.第C部分:建筑工程通用技术规范.地下建筑工程

The document specifies the contract conditions regarding materials, workmanship, ancillary labours and invoicing to be obeyed in underground works.

Contract procedures for building works - Part C: General technical specifications for building works; Underground construction work