91.010.99 其他方面 标准查询与下载

T/UNP 81-2024 建筑工程造价数据管理规范

前言　 1  范围 2  规范性引用文件 3  术语和定义 4  一般要求 5  数据采集 6  数据存储 7  数据整理 8  数据应用

Management specification for construction engineering cost data

GSO ASTM E2129:2024 建筑产品可持续性评估数据收集的标准规范

1.1 This practice covers a set of instructions for collecting data to be used in assessing the sustainability of building products for use in both commercial and residential buildings. 1.1.1 There are many features of a building that contribute to sustainability; one of them is the selection of products for use in a building. Other key features influencing sustainability include, but are not limited to: overall efficiency of the design of the building, the impact the building has on the habits of the occupants, and the impact the building has on the microclimate and macroclimate. This practice addresses sustainability issues related to building products. This practice does not address sustainability issues related to overall building design, site selection, building operations, or other features influencing sustainability. 1.1.2 While it is recommended that users rely on professional judgment informed by both environmental expertise and specific knowledge of the intended use of the product, this practice provides no instruction as to interpretation of the data obtained. Interpretation of the data obtained is the responsibility of the user of this practice. 1.1.3 This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This practice is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “standard” in the title means only that the document has been approved through the ASTM consensus process. 1.2 This practice is organized according to the Construction Specifications Institute’s (CSI) MasterFormat2 sections to promote consistency in the evaluation of building products 1.2.1 CSI MasterFormat version 1995 is used to organize information in Table 2. Appendix X1 provides a cross reference comparison to CSI MasterFormat 2004. 1.3 This practice includes general, comprehensive data requirements. Depending upon the building product, certain data requirements may not apply given the unique characteristics of the product and the potential environmental impacts related to the intended use of the product. Depending upon the building product, certain data requirements may need to be added as appropriate to the unique characteristics of the product and the potential environmental impacts related to the intended use of the product. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Data Collection for Sustainability Assessment of Building Products

GSO ASTM E2083:2024 建筑施工现场要求及办公费用和利润的标准分类

This standard covers a classification for field requirements, office overhead, and profit for use in construction estimating. This classification is common to all forms of construction, and its components are an integral part of any construction cost estimate. The classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, design, and construction phases of building. This standard also ensures consistency in the economic evaluation of construction work across time and from project to project, which enhances reporting at all stages in construction, from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal. This classification is not based on permanent physical elements of construction. Rather, the classification items are major, non-permanent, cost components common to all construction work. They perform the same function and provide for similar needs regardless of the design, specification, construction method, or materials used in the physical construction. The basis of classification and description of field requirements, description of office overhead and profit individual element are also detailed.

Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit

ASTM E2813-24 建筑物外壳调试的标准实施规程

Standard Practice for Building Enclosure Commissioning

T/CIET 439-2024 全过程工程咨询服务管理规范

本文件规定了全过程工程咨询服务管理的术语定义、基本原则与要求、组织管理、咨询服务模式、全过程工程服务管理策划、投资决策阶段的咨询管理、勘察设计、招标采购、工程施工阶段的咨询服务、竣工验收阶段的咨询服务、项目运营阶段的咨询服务与数字化管理等内容。 本文件适用于建设项目全过程或某一阶段工程咨询服务的规范与管理,

Whole Process Engineering Consulting Service Management Standards

T/CECA-G 0282-2024 钢结构工业建筑碳排放计算标准

行业数据采集、上位规范数据引用等综合方法进行建筑全生命周期碳排放测算，并总结算法。主要章节包括前言、范围、规范性引用文件、术语和定义、范围基本要求、钢结构工业建筑建材生产阶段碳排放计算方法、钢结构工业建筑建材运输阶段碳排放计算方法、钢结构工业建筑建造阶段碳排放计算方法、钢结构工业建筑运行阶段碳排放计算方法、钢结构工业建筑拆除阶段碳排放计算方法、钢结构工业建筑碳排放强度计算方法。

Carbon emission calculation standard for steel structure industrial buildings

DB11/T 383-2023 建筑工程施工现场安全资料管理规程

Construction site safety information management regulations for construction projects

DB11/T 2231-2023 规划建设管理电子报审数据标准

Planning and construction management electronic submission data standards

T/JNXXH 0030-2023 装配式混凝土建筑信息交互规程

本文件规定了装配式混凝土建筑信息的设计阶段信息交互、制构件加工阶段信息交互、施工阶段信息交互、交付阶段信息交互等内容。

Prefabricated concrete building information interaction procedures

BS EN 17840:2023 建筑物和土木工程的性能和状况评估 实物资产管理评估框架

Performance and condition assessment for buildings and civil engineering works. Framework for assessment within physical asset management

DB11/T 945.1-2023 建设工程施工现场安全防护、场容卫生及消防保卫标准 第1部分：通则

Construction site safety protection, site sanitation and fire protection standards for construction projects Part 1: General principles

T/CCIAT 0055-2023 建筑业绿色企业评价标准

本标准的主要技术内容是：1.总则；2.术语；3.基本规定；4.绿色经营与管理；5.绿色技术与产品；6.资源节约与环境保护六个章节。

Evaluation standards for green enterprises in the construction industry

T/BCEA 001-2022 装配式建筑施工组织设计规范

1、总则；2、范围；3、规范性引用文件；4、术语；5、基本规定；6、装配式施工组织设计分类；7、施工组织设计纲要；7.1、工程概述；7.2、编制说明及依据；7.3、施工部署；7.4、施工准备与主要资源配置计划；7.5、装配式结构主要施工方法；7.6、主要施工管理措施；7.7、施工总平面布置图。

Code for construction organization design of prefabricated buildings

T/GBA 0115-2023 地坪施工企业等级评定标准

本标准的主要技术内容包括：1.总则；2.范围；3.术语与定义；4.专业与等级划分；5.基本要求；6.评定；7.暂停与撤销；8.投诉与申诉。

Floor construction enterprise rating standard

T/GBA 0114-2023 门窗生产施工一体化企业等级评定标准

本标准的主要技术内容包括：1.总则；2.范围；3.术语与定义；4.专业与等级划分；5.基本要求；6.评定；7.暂停与撤销；8.投诉与申诉。

Evaluation standard for the level of integrated enterprise of door and window production and construction

T/GBA 0116-2023 地板采暖施工企业等级评定标准

本标准的主要技术内容包括：1.总则；2.范围；3.术语与定义；4.专业与等级划分；5.基本要求；6.评定；7.暂停与撤销；8.投诉与申诉。

Floor heating construction enterprise rating standard

T/CCIAT 0052-2023 装配式混凝土建筑工人职业技能标准

本标准的主要技术内容是：1.总则；2.术语；3.基本规定；4.钢筋加工配送工职业技能标准；5.预埋工职业技能标准；6.构件制作工职业技能标准；7.构件装配工职业技能标准；8.灌浆工职业技能标准。

Vocational skill standards for prefabricated concrete construction workers

T/CCIAT 0049-2023 建筑劳务班组长职业能力评价标准

本标准的主要技术内容是：1.总则；2.术语；3.基本规定；4.班组长的基本素质；5.班组长的组织和协调能力；6.班组长的专业管理能力；7.班组长现场作业管控；8.班组建设与创新发展；9.班组长职业能力评价。

Evaluation standard for professional ability of construction labor team leader

EN 17672:2022 建筑工程的可持续性 环境产品声明 企业对消费者沟通的横向规则

This document provides horizontal rules for business-to-consumer communication including benchmarking systems that aim to inform consumers about the life cycle environmental performance of construction products, assembled systems and construction elements. The communication is based on the results of the life cycle of the product, system or element, as incorporated to the construction asset, see EN 15804:2012+A2:2019. B2C communication includes information on benefits and loads beyond the system boundary. This document is aimed at organizations providing business-to-consumer communication and benchmarking systems and provides guidance on how to develop business-to-consumer communication and common rules for benchmarking methodologies using EPD, see EN 15804, and see EN 15942 for the communication format. Business-to-consumer communication and benchmarking methodology described in this document is based on a functional unit and cradle-to-grave assessments. B2C communication with no benchmarking is also described in this document.

Sustainability of construction works - Environmental product declarations - Horizontal rules for business-to-consumer communication

T/CIET 006-2022 工程质量检测机构信用评价标准

前言.........................................................................................................................................1  1.范围.......................................................................................................................................2  2.规范性引用文件...................................................................................................................2  3.术语和定义...........................................................................................................................2  4.评价原则...............................................................................................................................3  5.评价信息来源.......................................................................................................................3  6.评价指标和标准....................................................................................................................3  7.评价机构组织和职责...........................................................................................................4  8.评价程序...............................................................................................................................4  9.监督管理.................................................................................................................................6 附录 A （规范性附录）工程质量检测机构信用等级评价指标及评分标准...........................................................................................................................7 附录 B （规范性附录）工程质量检测机构信用评价等级划分标准..........................................................................................................................16 B1 等级符号...............................................................................................................................16 B2 等级解释...............................................................................................................................16 参考文献....................................................................................................................................17

Credit evaluation standard for engineering quality inspection institutions