91.010.99 其他方面 标准查询与下载

CEN/TR 17005:2016 建筑工程的可持续性 额外的环境影响类别和指标 背景资料和可能性 评估增加环境影响类别和相关指标的可能性以及计算方法

This Technical Report (TR) has been developed by CEN/TC 350/WG 1 and WG 3 to provide a clear and structured view on the relevance, robustness and applicability of a predefined set of additional impact categories and related indicators for the assessment of the environmental performance of construction works, construction products and building materials. The TR describes the evaluation criteria that are used to determine, for these impact categories, the suitability of indicators and calculation method(s) for inclusion in the standards EN 15978 and EN 15804 (or other CEN/TC 350 standards as appropriate) in terms of their: a) relevance to: 1) the environment, 2) construction works, 3) construction products, and 4) EU policy; b) scientific robustness and certainty; and c) applicability of the impact assessment method(s). The additional impact categories examined in the TR are: - human toxicity and ecotoxicity; - particulate matter; - land use; - biodiversity; - water scarcity; and - ionizing radiation. Because EN 15978 and EN 15804 are founded on a life cycle approach, the impact categories, indicators and methods reviewed are predominantly based on their potential suitability for application in LCA. In relation to some of the areas of concern, however, where LCA methods might not be sufficiently robust or developed, some non-LCA based indicators and methods are also considered. Due to the scope of LCA used in the EN 15804 and EN 15978, impacts to users of buildings due to direct exposure to harmful emissions fall outside the scope of this TR. This falls under the scope of CEN/TC 351. Important information related to this aspect found during the development of this TR, is however mentioned in the TR. Uncertainty is an important issue in LCA. General assessment of the uncertainty related to impact assessment models is considered in the evaluation framework of this TR. However, the TR does not lay down a maximum uncertainty level to be considered acceptable in the context of the CEN standards EN 15804 and EN 15978, nor does it provide exact figures on uncertainties. Annex A of the TR provides a description of options that may be considered for incorporating selected impact categories/indicator in the standards EN 15978 and EN 15804. The TR recognizes and takes account of: - the work done by the European Commission, Joint Research Centre (EC-JRC), in the development of the International Reference Life Cycle Data System (ILCD) Handbook Recommendations, - other reports and scientific studies into the methods and application of the indicators reviewed, - findings of specific activities connected with this work such as of the CEN/TC 350 Workshop, held in Brussels on 24-25 June 2014.

Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation me

PD CEN/TR 17005:2016 建筑工程的可持续性 额外的环境影响类别和指标 背景资料和可能性 评估增加环境影响类别和相关指标的可能性以及计算方法

Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation me

BS PD CEN/TR 16970:2016 建筑工程的可持续性. EN 15804实施指南

Sustainability of construction works. Guidance for the implementation of EN 15804

PD CEN/TR 16970:2016 建筑工程的可持续性 EN 15804 实施指南

Sustainability of construction works - Guidance for the implementation of EN 15804

VDI 6210 Blatt 1-2016 拆除民用建筑和技术设施

The standard defines the procedures and assessment criteria for the planning and execution of demolitions of civil constructions and technical facilities for all involved personnel. It applies to the demolition of stationary and non-stationary variable structural and technical systems. The standard describes the planning, implementation and follow-up of such work as well as retrieving, deployment, (interim) storage, treatment and handling of the accumulating materials and waste. It does not include the requirements imposed on the reuse of resulting materials or the recycling or the disposal of waste.

Demolition of civil constructions and technical facilities

DIN EN 15804:2014 建设工程的可持续性.环境无害产品声明.产品分类和建筑产品的核心规则

Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products; German version EN 15804:2012+A1:2013

EN 15804:2012+A1:2013 建设工程的可持续性.环境无害产品声明.产品分类和建筑产品的核心规则 包含修改件A1,2013

This European standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service. NOTE The assessment of social and economic performances at product level is not covered by this standard. The core PCR: defines the parameters to be declared and the way in which they are collated and reported, describes which stages of a product's life cycle are considered in the EPD and which processes are to be included in the life cycle stages, defines rules for the development of scenarios, includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied, includes the rules for reporting predetermined, environmental and health information, that is not covered by LCA for a product, construction process and construction service where necessary, defines the conditions under which construction products can be compared based on the information provided by EPD. For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products

NS 3454-2013/AC-2013 勘误表 AC 建筑工程的生命周期成本 原则和分类

Corrigendum AC - Life cycle costs for construction works - Principles and classification

LST EN 15804-2012 建筑工程的可持续性 环境产品声明 建筑产品产品类别的核心规则

Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products

DIN EN 15804:2012 建设工程的可持续性.环境无害产品声明.产品分类和建筑产品的核心规则.德文版本 EN 15804-2012

Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products; German version EN 15804:2012

BS EN 15804:2012+A1:2013 建筑工程的可持续性. 环境产品声明. 建筑产品类别的核心规则

Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products

BS EN 15804:2012 建筑工程的持续性.环境产品声明.建筑产品的产品类别的核心规则

Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products

EN 15804:2012 建设工程的可持续性.环境无害产品声明.产品分类和建筑产品的核心规则

This European Standard provides core product category rules (PCR) for Type III environmental declarations for any construction product and construction service. NOTE The assessment of social and economic performances at product level is not covered byThis standard. The core PCR: defines the parameters to be declared and the way in which they are collated and reported, describes which stages of a product's life cycle are considered in the EPD and which processes are to be included in the life cycle stages, defines rules for the development of scenarios, includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied, includes the rules for reporting predetermined, environmental and health information, that is not covered by LCA for a product, construction process and construction service where necessary, defines the conditions under which construction products can be compared based on the information provided by EPD. For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products (Incorporates Amendment A1: 2013)

DB21/T 1924-2011 装配整体式建筑技术规程（暂行）

Assembled monolithic building technical regulations (provisional)

BS PD CEN/TR 15941:2010 建筑工程的可持续性.环境产品声明.通用数据的选择和使用方法

This Technical Report supports the development of Environmental Product Declarations (EPD). It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978. The requirements for the use of generic data are described in prEN 15804.

Sustainability of construction works — Environmental product declarations — Methodology for selection and use of generic data

PD CEN/TR 15941:2010 建筑施工的可持续性.环境产品声明.选择和使用通用数据的方法

This Technical Report supports the development of Environmental Product Declarations (EPD). It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978. The requirements for the use of generic data are described in prEN 15804.

Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data

ASTM E2129-10 建筑产品可持续性评定用数据采集的标准操作规程

1.1 This practice covers a set of instructions for collecting data to be used in assessing the sustainability of building products for use in both commercial and residential buildings.1.1.1 There are many features of a building that contribute to sustainability; one of them is the selection of products for use in a building. Other key features influencing sustainability include, but are not limited to: overall efficiency of the design of the building, the impact the building has on the habits of the occupants, and the impact the building has on the microclimate and macroclimate. This standard addresses sustainability issues related to building products. This standard does not address sustainability issues related to overall building design, site selection, building operations, or other features influencing sustainability.1.1.2 While it is recommended that users rely on professional judgment informed by both environmental expertise and specific knowledge of the intended use of the product, this standard provides no instruction as to interpretation of the data obtained. Interpretation of the data obtained is the responsibility of the user of this standard.1.1.3 This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This practice is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "standard" in the title means only that the document has been approved through the ASTM consensus process.1.2 This standard is organized according to the Construction Specifications Institute's (CSI) MasterFormat sections to promote consistency in the evaluation of building products.1.3 This standard includes general, comprehensive data requirements. Depending upon the building product, certain data requirements may not apply given the unique characteristics of the product and the potential environmental impacts related to the intended use of the product. Depending upon the building product, certain data requirements may need to be added as appropriate to the unique characteristics of the product and the potential environmental impacts related to the intended use of the product.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Data Collection for Sustainability Assessment of Building Products

PD CEN/TR 15563:2007 临时工程设备 实现健康和安全的建议

Temporary works equipment - Recommendations for achieving health and safety

DB11/ 382-2006 建设工程安全监理规程

为了促进北京市建设工程施工阶段安全生产监理工作(以下简称安全监理)的程序化、规范化、科学化，提高建设工程施工阶段安全监理工作的水平，落实安全监理职责，制定本规程。本规程依据《建设工程安全生产管理条例》、《北京市安全生产条例》、《建设工程监理规范》等有关建设工程安全监理的法规和标准编制。本规程是对《建设工程监理规程》的补充。本规程适用于北京地区新建、扩建、改建和拆除的建设工程施工阶段安全监理活动。

Specification of safety construction supervisio

DS/CEN/TR 15226:2006 建筑产品 产品技术规范中的声学处理

This document specifies the technical requirements relating to acoustics for a product standard, European Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write requirements in response to the mandated characteristics on acoustics under the Construction Products Directive.NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA).The purpose of this document is t

Building products - Treatment of acoustics in product technical specifications