91.040.01 建筑物综合 标准查询与下载

ISO 11855-1:2021/FDAmd 1 建筑环境设计 嵌入式辐射供暖和制冷系统 第 1 部分：定义、符号和舒适度标准 修正案 1

Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria — Amendment 1

ISO 11855-5:2021/DAmd 1 建筑环境设计 嵌入式辐射供暖和制冷系统 第 5 部分：安装 修订 1

Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation — Amendment 1

ISO 11855-3:2021/DAmd 1 建筑环境设计 - 嵌入式辐射供暖和制冷系统 - 第 3 部分：设计和尺寸 - 修订 1

Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning — Amendment 1

ISO/CD 16813:2023 建筑环境设计 室内环境 总则

Building environment design — Indoor environment — General principles

ISO 11855-2:2021/DAmd 1 建筑环境设计 嵌入式辐射供暖和制冷系统 第2部分：设计供暖和制冷能力的确定 修订1

Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity — Amendment 1

ISO 11855-7:2019/DAmd 1 建筑环境设计 嵌入式辐射供暖和制冷系统的设计、尺寸确定、安装和控制 第 7 部分：能量计算的输入参数 修正案 1

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation — Amendment 1

ISO 11855-4:2021/DAmd 1 建筑环境设计 - 嵌入式辐射供暖和制冷系统 - 第 4 部分：热主动建筑系统 (TABS) 动态供暖和制冷能力的尺寸和计算 - 修正案 1

Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1

ISO 11855-6:2018/PRF Amd 1 建筑环境设计 嵌入式辐射供暖和制冷系统的设计、尺寸确定、安装和控制 第 6 部分：控制 修订 1

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control — Amendment 1

ISO/FDIS 11855-8:2023 建筑环境设计 嵌入式辐射供暖和制冷系统的设计、尺寸确定、安装和控制 第 8 部分：电加热系统

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 8: Electrical heating systems

T/ZPP 011-2023 民用建筑节能工程施工技术规程

本文件规定了民用建筑节能工程施工的术语和定义、总则、基本规定、施工准备、施工过程、施工后验收与监管等内容。 本文件适用于新建、改建和扩建的民用建筑工程。

Construction technical regulations for civil building energy-saving projects

DB42/T 2012-2023 土家族吊脚楼营造规程

Tujia Diaojiao Building Construction Regulations

T/ZPP 007-2023 民用建筑防火构造与装修技术要求

本文件规定了民用建筑的建筑分类和耐火等级、总平面布局、防火分区和层数、平面布置以及安全 疏散和避难。  本文件适用于民用建筑防火结构的设计、布局和装修。

Technical requirements for fire protection structure and decoration of civil buildings

ASTM E2844-23 证明建筑物位置提供公共交通通道的标准规范

1.1 This specification provides requirements for demonstrating that a building’s location provides a minimal level of access to public transit such that building occupants can rely on public transit to travel to places of employment and to run typical errands. 1.2 This specification addresses a single indicator regarding the environmental performance related to a building’s location. It provides one option for evaluating whether a building is located in such a way as to minimize the impacts associated with occupants’ travel. NOTE 1—The indicator in and of itself is insufficient to imply any level of “sustainability” for the building or the neighborhood. Similarly, a building’s failure to meet this specification does not necessarily signify a lack of sustainability. Other indicators may be more appropriate for that building or region; those indicators are outside the scope of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit

BS ISO 21928-2:2023 建筑和土木工程的可持续性 可持续性指标 土木工程指标制定框架

Sustainability in buildings and civil engineering works. Sustainability indicators - Framework for the development of indicators for civil engineering works

T/CECS 1330-2023 岭南禅宗寺院建筑设计标准

本标准共分11章，主要内容包括：总则、术语和符号、基本规定、场地和总平面、建筑、结构、设备、防火和疏散、室内环境、装配式建筑、建筑信息模型。

Architectural Design Standards for Lingnan Zen Monasteries

T/CECS 1317-2023 综合医院感染性疾病门诊设计标准

本标准共分10章，主要内容包括：总则、术语和缩略语、医疗工艺及感控要求、选址与建筑、暖通空调、给水排水、电气、智能化、医用气体、创新技术。

Design standards for infectious disease outpatient clinics in general hospitals

DB11/ 2101-2023 健康建筑设计标准

Healthy Building Design Standards

ASTM E2432-23 关于建筑环境的可持续性一般原则的标准指南

1.1 There are three general principles of sustainability: environmental, economic, and social. This guide covers application of the fundamental concepts and associated characteristics for each of the general principles of sustainability to the built environment. 1.2 This guide identifies general methodologies associated with the decision-making process used in pursuing sustainability. 1.3 The general principles identified in this guide are applicable to all life-cycle stages of design and construction within the built environment. 1.4 A variety of tools and standards exist that qualify and quantify impacts of the built environment in terms of the general principles of sustainability. It is not within the scope of this standard to recreate or replace these tools. 1.5 This guide does not provide direction as to the specific implementation of the general principles; nor does it provide direction as to the specific weighting of principles necessary for achieving balance between competing goals. 1.6 Applying the principles in this guide will require professional judgment. Such judgment should be informed by experience with environmental, economic, and social issues as appropriate to the use, type, scale, and location. 1.7 This guide offers an organized collection of information or a series of options but does not recommend a specific course of action. This document cannot replace education, experience, or community dialogue. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for General Principles of Sustainability Relative to the Built Environment

ISO 21928-2:2023 建筑和土木工程的可持续性 可持续性指标 第 2 部分：土木工程指标制定框架

This document establishes a set of common aspects and impacts for all typologies of civil engineering works, and identifies core sets of environmental, social and economic aspects and impacts for each typology of civil engineering works defined. The common core set of aspects and impacts described in this document are applicable to all types of civil engineering works. In addition, this document describes specific core sets of aspects and impacts for different typologies of civil engineering works (industrial process infrastructures; linear infrastructures; dams and other fluvial works; maritime works; public spaces; and other civil engineering works not contained in the previous typologies). Further, the document gives rules for establishing a system of indicators and describes how to use sustainability indicators regarding civil engineering works. This document does not provide guidelines for the weighting of indicators or the aggregation of assessment results.

Sustainability in buildings and civil engineering works — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works

ISO/DIS 22185-2:2023 诊断建筑物的湿气损坏并采取对策 第 2 部分：状况评估

Diagnosing moisture damage in buildings and implementing countermeasures — Part 2: Condition assessment