91.040.01 建筑物综合 标准查询与下载

T/HNCAA 037-2022 高强复合石膏自保温外墙体系技术标准

1  总则 2  术语 3  材料 4  设计 4.1  一般规定 4.2  墙体热工设计 4.3  构造设计 5  施工 5.1  一般规定 5.2  施工准备 5.3  砌筑施工要求 5.4  构造柱施工要求 5.5  抹灰施工要求 6  验收 6.1  一般规定 6.2  主控项目 6.3  一般项目

Technical standard for exterior wall system using high-strength composite gypsum insulation block

DB11/T 1999-2022 既有建筑改造保温系统拆除与回收技术规范

Technical specifications for dismantling and recycling of thermal insulation systems in existing buildings

ISO 24365:2022 散热器和对流器.测定热输出的方法和额定值

This document defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source. This document specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the criteria for selecting the samples to be tested and for verifying the conformity of the current production with the samples tested at the initial test. This document also defines the additional common data that the manufacturer shall provide with the product in order to ensure the correct application of the products. This document does not apply to fan-assisted radiators, fan-assisted convectors and trench convectors or to independent heating appliances.

Radiators and convectors — Methods and rating for determining the heat output

T/CECS 1140-2022 景区人行悬索桥工程技术规程

本规程共分12章和6个附录，主要内容包括：总则、术语和符号、基本规定、材料、工程设计、作用和作用组合、结构分析、构件与节点的设计与构造、结构耐久性设计、施工与验收、检测与评定、运营与维护等。

Scenic Pedestrian Suspension Bridge Engineering Technical Regulations

BS ISO 21931-1:2022 建筑和土木工程的可持续性 作为可持续性评估基础的建筑工程环境、社会和经济绩效评估方法框架 建筑物

1   Scope This document provides a general framework for improving the quality and comparability of methods for assessing the environmental, social and economic performance of construction works , and their combination as a basis for the sustainability assessment of buildings . It identifies and describes issues to be taken into account in the development and use of methods of assessment of the environmental, social and economic characteristics, aspects and impacts of new or existing buildings . These relate to the building ’s design, production of construction products , materials and components , construction, operation, maintenance and refurbishment and end-of-life processes . This document is applicable to the assessment of the building (or part thereof) and the external works within its site (curtilage). NOTE The assessment of environmental, social and economic aspects related to the location of the building , such as those resulting from transportation of the users, can extend beyond the area of the building site. This document does not set benchmarks or levels of performance relative to environmental, social and economic impacts and aspects.

Sustainability in buildings and civil engineering works. Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment - Buildings

T/CECS 1125-2022 模块应急传染病医院建筑技术规程

本规程共分8章，主要内容包括：总则、术语、项目构成与面积指标、选址与总平面、设计、施工、检测与验收、拆装与回用。

Modular emergency infectious disease hospital building technical regulations

DB1331/T 025.1-2022 雄安新区工程建设关键质量指标体系 建筑工程

Key quality indicator system for project construction in Xiongan New Area: Construction Engineering

ISO 21931-1:2022 建筑物和土木工程的可持续性.作为可持续性评估基础的建筑工程环境、社会和经济性能评估方法框架.第1部分:建筑物

This document provides a general framework for improving the quality and comparability of methods for assessing the environmental, social and economic performance of construction works, and their combination as a basis for the sustainability assessment of buildings. It identifies and describes issues to be taken into account in the development and use of methods of assessment of the environmental, social and economic characteristics, aspects and impacts of new or existing buildings. These relate to the building’s design, production of construction products, materials and components, construction, operation, maintenance and refurbishment and end-of-life processes. This document is applicable to the assessment of the building (or part thereof) and the external works within its site (curtilage). NOTE The assessment of environmental, social and economic aspects related to the location of the building, such as those resulting from transportation of the users, can extend beyond the area of the building site. This document does not set benchmarks or levels of performance relative to environmental, social and economic impacts and aspects.

Sustainability in buildings and civil engineering works — Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability

ASTM C1519-10(2022) 用实验室加速风化程序评估建筑密封材料耐久性的标准试验方法

1.1 This test method covers the method for the determination of the durability of a sealant based on its ability to function in cyclic movement maintaining adhesion and cohesion after repeated exposure to laboratory accelerated weathering procedures. 1.2 This test method describes two laboratory accelerated weathering procedures for evaluating the durability of a sealant. 1.3 RILEM TC139–DBS is related to this test method. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

CSA R101-2022 自动化水文气象监测站：选址、仪器安装和仪器维护

1 Scope 1.1 Object This Standard provides Canadian monitoring network operator requirements and recommendations for selecting sites for automated, surface-based, hydrometeorological monitoring stations, and broad guidance for installing and maintaining commonly used automated hydrometeorological instrumentation. This Standard has two main technical sections: a) Clause 4, on station infrastructure, discusses general layouts of instrumentation and desirable characteristics of hydrometeorological stations. b) Clause 5, on site selection and sensor installation and maintenance, presents criteria for selecting and classifying monitoring sites for specific and commonly used sensors. It also provides detailed information on the installation and maintenance best practices for various sensors. Note: This Standard is complementary to industry-specific requirements, such as for surface-based stations in support of aviation, avalanche forecasting, road safety, etc. Guidelines on variable units and precision, sampling schedules, sample aggregation periods, field verification intervals, and sensor recalibration intervals are provided in CSA R102. 1.2 Exclusions This Standard does not address surface water, groundwater, and detailed snow, glacier mass balance, and air quality (pollutant) monitoring equipment. Further, this Standard excludes less commonly used instrumentation such as L, S, C, X, and K band acoustic Doppler weather RADAR, mini-weather RADAR, SODAR wind profilers, and ceilometers, as well as manually operated instrumentation. 1.3 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Automated hydrometeorological monitoring stations: Site selection, instrument installation, and instrument maintenance

GSO ISO 52031:2022 建筑物能源性能 系统能源需求和系统效率的计算方法 空间排放系统（加热和冷却）

This document establishes the required inputs, outputs and links (structure) of the calculation method for heating and cooling space emission systems. This document is applicable to the energy performance calculation of heating systems and water-based cooling space emission sub-systems.

Energy performance of buildings — Method for calculation of system energy requirements and system efficiencies — Space emission systems (heating and cooling)

GSO ISO 21678:2022 建筑和土木工程的可持续性 指标和基准 原则、要求和指南

This document defines principles, requirements and guidelines for the development and use of benchmarks when assessing the economic, social and/or environmental performance of buildings and civil engineering works by using sustainability indicators. It complements and supports the application of ISO 21929-1 and ISO/TS 21929-2 by creating principles and requirements for the establishment of benchmarks that support target setting, decision making and communication to third parties. This document is also related to ISO 21931-1 and ISO 21931-2 by creating principles, requirements and guidelines for the establishment and use of benchmarks related to environmental performance and other aspects of sustainability. This document describes three types of values for benchmarks (performance levels for comparison purposes): — limit values; — reference values; — target values. This document does not set benchmarks.

Sustainability in buildings and civil engineering works — Indicators and benchmarks — Principles, requirements and guidelines

GSO ISO 19455-1:2022 建筑调试功能性能测试规划 第1部分：二次液体循环泵、系统和相关控制装置

This document specifies a planning method for functional performance testing (FPT). This document is applicable to the planning of the FPT during the design phase of new buildings and retrofit projects, which is defined in ISO 16813. This document establishes how to design building environmental systems when the FPT is being carried out. This document defines the following: — what kind of information regarding the system is required (for example, design documents, drawings and product specifications); — what kind of data should be measured (though concrete measurement techniques are not specified in this document); — how the measured data is analysed. Such clear definition of the FPT makes it possible for building designers to prepare and plan for FPT throughout the design process. This document specifies an FPT method for secondary hydronic pump, system and associated controls in heating, ventilation and air conditioning (HVAC) systems.

Planning for functional performance testing for building commissioning — Part 1: Secondary hydronic pump, system and associated controls

T/QGCML 274-2022 气凝胶零能耗小屋

本文件规定了气凝胶零能耗小屋的术语和定义、分类和标记、规格尺寸、材料要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于气凝胶零能耗小屋的生产、销售、施工及验收。

Airgel Zero Energy House

BS EN 17472:2022 建筑工程的可持续性 土木工程的可持续性评估 计算方法

What is this BS EN 17472 - Sustainability assessment of civil engineering works about? BS EN 17472 discusses the sustainability of construction works and sustainability assessment of civil engineering works with a focus on calculation methods. BS EN 17472 establishes the requirements and specific methods for the assessment of environmental, economic, and social performances of civil engineering works while considering the civil engineering works’ functionality and technical characteristics. By the means of BS EN 17472 , the decision-making for a project is supported by providing a standardized method for enabling comparability of scheme options. BS EN 17472 is applicable to new and existing civil engineering works and refurbishment projects. The environmental performance is based on data obtained from Environmental Product Declarations (EPD) and additional indicators. Note: BS EN 17472 is not applicable for the assessment of the environmental, social, and economic performance of buildings as part of the civil engineering works; instead, EN 15978 , EN 16309 , and EN 16627 apply. Who is BS EN 17472 - Sustainability assessment of civ...

Sustainability of construction works. Sustainability assessment of civil engineering works. Calculation methods

DB4401/T 151-2022 装配式建筑评价标准

Prefabricated Building Evaluation Standards

DB1331/T 012-2022 雄安新区绿色建筑工程验收指南

Xiongan New Area Green Building Project Acceptance Guide

DB1331/T 011-2022 雄安新区绿色建筑施工图审查要点

Key points for review of green building construction drawings in Xiongan New District

T/TJKCSJ 002-2022 建筑碳中和评定标准

本标准本着实现建筑低碳设计、高效运维和可持续发展的目标，紧紧抓住降能需、提能效、增碳汇、可再生能源利用等高效减排技术措施，结合国内特别是天津地区的实际现状，认真总结以往绿色低碳建筑的设计实践，参考国内外相关标准并在广泛征求意见的基础上编制，本标准主要包括七个章节：1、总则，2、术语，3、基本规定，4、建筑能耗、设备能效与室内环境指标，5、设备能效与室内环境检测，6、碳排放核算，7、碳中和结果评定。

Building Carbon Neutrality Rating Standard

BS 40101:2022 对占用和运营建筑物的建筑性能评估（使用从测试、测量、观察和用户体验收集的数据）规格

Discover our Retrofit Framework Infographic here. What is BS 40101 - Performance of occupied and operational buildings about?    BS 40101 is concerned with the evaluation of the performance of buildings at any point during the operational stage of their lives. BS 40101 provides a tailored and graduated approach enabling the specification to be used across all building types and uses and for a wide range of project or study objectives. BS 40101 covers the planning of BPE studies, including timing for new buildings or those subject to major refurbishment or retrofit and content based on the purpose of the evaluation and the use and complexity of the buildings.   BS 40101 discusses the choice of comparator cases that includes performance specification, design predictions, modelled design, regulatory thresholds, previous evaluation of the same building, evaluation of similar buildings and industry benchmarks and thresholds set by quality standards. BS 40101 includes data gathering relevant to the BPE level pursued, through documentation review, test and measurement, monitoring, experiential feedback and observations along w...

Building performance evaluation of occupied and operational buildings (using data gathered from tests, measurements, observation and user experience). Specification