91.040.30 住宅建筑物 标准查询与下载

ASTM E1465-08a 新式低层住宅设计和建造用氡控制方案选择标准实施规范

Fan-powered radon reduction systems built into new residential buildings according to this practice are likely to reduce elevated indoor radon levels, where soil-gas is the source of radon, to below 2.0 picocuries per litre (pCi/L) (75 becquerels of radon per cubic metre (Bq/m3)) in occupiable spaces. Passive radon reduction systems do not always reduce such indoor radon concentrations to below 2.0 picocuries per litre (pCi/L) (75 becquerels of radon per cubic metre (Bq/m3)) in occupiable spaces. When a passive system, built according to this practice, does not achieve acceptable radon concentrations, that system should be converted to fan-powered operation to significantly improve its performance. Exceptions—New residential buildings built on expansive soil and karst may require additional measures, not included in this practice, to achieve acceptable radon reduction. Consider consulting with a soil/geotechnical specialist, a qualified foundation structural engineer and contacting the state’s radon in air specialist for up-to-date information about construction methods. Names of your state radon specialist are available from the U.S. EPA website (http://www.epa.gov/radon). Note 18212;Residences using private wells can have elevated indoor radon concentrations due to radon that out-gasses from the water used indoors, like water used to shower (7). Consider contacting your state’s radon specialist for up-to-date information on available methods for removing radon from private well water. All soil depressurization radon reduction methods require a gas-permeable layer which can be depressurized. The gas-permeable layer is positioned under the building’s sealed ground cover. In the case of the active soil depressurization system, a radon fan pulls air up the vent stack to depressurize the gas-permeable layer. In the case of a passive soil depressurization system, when air in the vent stack is warmer than that outdoors, the warmer air rises in the stack causing the gas-permeable layer to be depressurized. The passive system depressurizes the gas-permeable layer intermittently; the fan-powered system depressurizes the gas-permeable layer continuously. The performance of gas-permeable layers depends on their design; see 6.4.1.3. A radon reduction system that operates passively requires the most efficient gas-permeable layer. U.S. EPA recommended action level concerning indoor radon states that the radon concentration should always be reduced if it is 4 picocuries per litre (pCi/L) (150 becquerels of radon per cubic metre (Bq/m3)) or above in occupiable spaces. According to U.S. EPA there is also reduced risk when radon concentrations in indoor air are lowered to below 2.0 picocuries per litre (pCi/L) (75 becquerels of radon per cubic metre (Bq/m3)) in occupiable spaces (4). Significant benefit is obtained from reducing indoor radon concentrations to below 4 pCi/L (150 Bq/m3). According to the U.S. EPA’s risk assessment (8), about 62 out of 1000 people who smoke will die from a lifetime’s average radon exposure of 4 pCi/L (150 Bq/m3); for people who never smoked about 7 out of 1000 will people die from the same lifetime exposure. Smokers’ lifetime risk of death from lung cancer is reduced by about half (50 %) when their average radon exposure is reduced from 4 to 2 pCi/L (150 to 75 Bq/m3); their risk is reduced by about two-thirds (67 %) when their exposure is reduced from 4 ......

Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings

KS F 2224-2007 住宅储藏室墙壁构件

이 규격은 주택에 사용되는 수납 벽체 시스템(이하 수납 벽체라 한다.)에 대하여 규정한다.

Storage-wall system for dwellings

DB11/ 381-2006 既有居住建筑节能改造技术规程

为贯彻落实北京地区居住建筑节能65%的要求，改变大量既有非节能居住建筑采暖能耗大、热环境质量差的现状，结合北京地区既有居住建筑的特点，加强既有非节能居住建筑节能改造工程(以下简称节能改造工程)的管理，统一节能改造工程技术要求，保证节能改造工程质量，制定本规程。本规程适用于北京地区既有多层和高层非节能建筑节能改造工程。既有公共建筑节能改造、既有平房居住建筑节能改造可参考采用。

Technical specification of renovation of energy eficiency for existing residential building

ANSI/IEEE 765:2006 核电站(NPGS)的优先选用电源(PPS)标准

Describes the design criteria of the Preferred Power Supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and alternate ac (AAC) source. Provides PPS requirements for nuclear power generating stations (NPGS) and guidance in the areas of ACC power source interfaces with the PPS, physical independence of the PPS power and control circuits, and expanded PPS criteria for multi-unit stations.

Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)

JG/T 184-2006 住宅整体厨房

本标准规定了住宅整体厨房的术语和定义、厨房面积及布置形式、厨房家具和厨房设备分类、厨房家具及设备标志尺寸、要求、试验方法、检验规则以及标志、包装、运输、储存等。 本标准适用于新建、改建和扩建的住宅整体厨房。

Kitchen unit for housing

JGJ 36-2005 宿舍建筑设计规范

本规范适用于新建、改建和扩建的宿舍建筑设计。

Code for design of dormitory building

CECS 179-2005 健康住宅建设技术规程

本规程适用于城市健康住宅(住区)的开发建设和工程验收，以及住宅(住区)健康性能的检测与评估。

Technical specification for construction of healthy housing

ANSI Z765-2003 单元式居住房屋.方形尺码.计算方法

The changes that are the subject of this public review are substantive changes to the body of the standard that resulted from the 1st public review. These substantive changes provide for another calculation method that allows measurement of a structure b

Single-Family Residential Buildings – Square Footage – Method for Calculating

DB50/T 5023-2002 重庆市住宅厨房设施功能和尺度标准

本标准涉及的问题：厨房设施的设置原则及其相对位置；厨房设施的使用功能及质量要求；厨房管道的位置、走向，有害气体的排除方式；厨房设施的基本尺度及其相互关系；厨房设施的安装高度及平面位置；厨房设施与建筑构配件之间的尺度关系。本标准适用于重庆市有燃气供应的新建住宅。对住宅厨房设施的设计、施工和工厂组织生产相关产品从功能和尺度上起制约作用。改建住宅和无燃气供应的地区可参照使用。

Standard for functions and dimensions of kitchen fixtures in residential buildings for Chong Qing

CECS 123-2001（条文说明） 斜屋顶下可居住空间技术规程

Technical specification for living space under sloping roof

CECS 123-2001 斜屋顶下可居住空间技术规程

本规程适用于住宅建筑。其它民用建筑，如办公楼、旅馆、学校、医院等新建或加层时可参照执行。

Technical specification for living space under sloping roof

CECS 119-2000 城市住宅建筑综合布线系统工程设计规范

本规范适用于新建、扩建和改建城市住宅小区和住宅楼的综合布线系统工程设计。对于分散的住宅建筑和现有的住宅楼应充分利用市内电话线开通各种话音、数据和多媒体业务。

Code for engineering design of generic cabling system for civic residential buildings

BS 6767-1:1999 移动式膳宿装置.基础装置的设计和施工的推荐规范

This part of BS 6767 gives recommendations for the design and construction of the basic shell of single transportable accommodation units that are "exempt buildings" as defined by the appropriate building regulations applicable in England and Wales, Scotland and Northern Ireland. The units can be leg-mounted, skid-mounted, wheel-mounted or platform-mounted. Recommendations are also given for certain special considerations applying to some of the individual types. These recommendations are intended for use by designers and manufacturers of the basic units. Part 2 of this standard gives recommendations on the design and installation of services, and fittings plus guidance on necessary fire precautions and also transportation, handling and siting.

Transportable accommodation units. Recommendations for design and construction of the basic unit

BS 6767-2:1998 移动式膳宿装置.带有关住房的运输,选址和样式指南的辅助设备和配件的设计以及装配的推荐规范

This part of BS 6767 gives recommendations for the design and installation of services, partitions, stairways, steps, ramps, links, units used for storage and equipment in transportable accommodation units. It gives guidance on legislation, fire precautions, transportation, handling, siting, climatic exposure, environmental considerations, foundations and anchoring, and the inspection and maintenance of the units with particular reference to aspects of safety in use. These recommendations are intended for use by designers, manufacturers, suppliers, installers and purchasers of transportable accommodation units. They apply to the four types of unit listed in BS 6767-1.

Transportable accommodation units. Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation

KS F 2222-1996 住宅组合式浴室标准模块基本尺寸

이 규격은 주택에 사용되는 욕실의 표준 모듈 호칭 치수에 대하여 규정한다.

Standard nominal dimension of sanitary unit for dwellings

KS F 2222-1996(2016) 对于住宅卫生单元的标准标称尺寸

Standard nominal dimension of sanitary unit for dwellings

KS F 2222-1996(2021) 住宅卫生设备的标准标称尺寸

Standard nominal dimension of sanitary unit for dwellings

JGJ 1-1991（条文说明） 装配式大板居住建筑设计和施工规程

Specification for design and construction of fabricated board civil building structures(explanation)

SNI 03-3430-1994 住宅与建筑物. 空心混泥土构架墙壁设计方法

Housing and building, Code for the design hollow block reinforced concrete structural wall

SNI 03-2845-1992 公寓模型设计方法

Code for the design of modular apartment