91.060.01 建筑构件综合 标准查询与下载

JG/T 545-2018 卫生间隔断构件

　　现批准《卫生间隔断构件》为建筑工业行业产品标准，编号为JG/T545-2018，自2019年4月1日起实施。 　　本标准在住房城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2018年8月24日

Bathroom partition components

T/JX 015-2018 家用及类似用途集成晾衣装置

本标准规定了家用及类似用途集成晾衣装置的术语和定义、分类及规格、基本要求、技术要求、试验方法、检验规则以及包装、标志、运输、贮存等内容。 本标准适用于额定电压不超过250V(AC)的集成晾衣装置。

Household and similar integrated clothes hanger appliances

T/JX 016-2018 吊顶用多功能器具

本标准规定了吊顶用多功能器具的分类、术语和定义、技术要求、试验方法、检验规则以及包装、标志、运输、贮存等内容。 本标准适用于浴室、厨房、客厅等场所，与吊顶板组合安装的集照明、换气、取暖、干燥等功能于一体的功能器具。

Multifunctional appliance for ceiling

T/GDID 1004-2018 蒸汽房

根据在生产厂家的调研和产品的使用实际情况制定了使用条件、一般要求、外观、温升效率、蒸汽的发生与控制功能、结构和装配质量、房体结构强度、电器安全性、控制功能几个技术指标。结构和装配质量包括启闭力、磁吸力、门开启宽度的极限尺寸、主活动门拉手在门关闭或开启到最大位置时它与固定边的最小距离、蒸汽房的平开门应自房内向外开启几个要求。  

steam rooms

T/GDID 1003-2018 桑拿房

根据在生产厂家的调研和产品的使用实际情况制定了材料及配件 、外观、使用性能、结构和装配质量、房体稳定性、电器安全性、控制功能几个技术指标。使用性能指标包括温升极限、温升效率、温度均匀度三个指标。桑拿炉属于I类电器产品，其电器安全性应符合GB 4706.31要求。

sauna rooms

ASTM E529-04(2018) 建筑结构用梁和大梁弯曲试验的标准指南

1.1 This guide covers the flexural testing of beams and girders under simulated service conditions to determine their structural performance characteristics. Methods following this guide are intended primarily for constructions that may not conform with the relatively simple assumptions upon which well-known flexural theories are based. In some cases, they are also suitable for determining the structural adequacy of the design, materials, connections, and fabrication techniques. The methods are not intended for use in routine quality control tests. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statement, see 7.1. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

T/CFDCC 0203-2018 实木定制家居产品

本标准规定了实木定制家居产品的术语和定义、分类、材料、一般规定、技术要求、试验方法、检验规则、标志、包装、随行文件、运输和贮存及服务。

Solid wood customized housing?product

JG/T 544-2018 轻钢龙骨式复合墙体

Light steel keel type composite wall

DB11/T 1490-2017 人民防空工程防护设备安装验收技术规程

Technical regulations for installation and acceptance of protective equipment for civil air defense projects

DB11/ 512-2017 建筑装饰工程石材应用技术规程

Technical specification for stone application in architectural decoration engineering

ASTM D7052/D7052M-17 使用钢球确定新型低斜率屋顶膜的抗冲击性的标准试验方法（Z8295Z）

1.1 This test method covers the determination of impact resistance of new low slope roof membranes when applied directly over rigid insulation or cover board, or structural concrete, lightweight insulating concrete, gypsum, cementitious wood fiber or wood roof decks. The procedures were developed to determine the potential for puncture or fracture of the new roof membrane resulting from impacts by free falling steel balls resulting in specific impact energies when the new roof membrane is applied over its tested substrate within an assembly. 1.2 This test method is intended to verify that products as described will meet a specific stated condition of impact resistance performance. Testing of asphalt shingles is beyond the scope of this test method. The tests yield classification identified as Class 2 and Class 3. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)

DB52/T 1165-2017 黔北民居

Qianbei folk houses

GSO ISO 21542:2016 建筑施工 建筑环境的可达性和可用性

This International Standard specifies a range of requirements and recommendations for many of the elements of construction, assemblies, components and fittings which comprise the built environment. These requirements relate to the constructional aspects of access to buildings, to circulation within buildings, to egress from buildings in the normal course of events and evacuation in the event of an emergency. An informative annex is also included which deals with aspects of accessibility management in buildings. This International Standard contains provisions with respect to features in the external environment directly concerned with access to a building or group of buildings from the edge of the relevant site boundary or between such groups of buildings within a common site. This International Standard does not deal with those elements of the external environment, such as public open spaces, whose function is self-contained and unrelated to the use of one specific building, nor does it deal with single family dwellings, other than those circulation spaces and fittings that are common to two or more such dwellings. At present, consideration is being given to the development and publication of additional parts to this International Standard to deal with the types of external environments described above and single family dwellings. For existing buildings there are options included in some paragraphs which appear as “exceptional considerations for existing buildings in developing countries” (see “Guidance on the Implications of the ISO Global Relevance Policy for CEN Standardization”, 2005) and as “exceptional considerations for existing buildings” where a lesser standard than expected in new developments is accepted on the grounds of technical and economic circumstances only. The dimensions stated in this International Standard, relevant to the use of wheelchairs, are related to the footprint of commonly used wheelchair sizes and users. The footprint for a wheelchair within this International Standard is based on ISO 7176-5 and ISO/TR 13570-2 and is 800 mm wide and 1 300 mm long. For larger wheelchairs and scooters, dimensions will have to be considered accordingly. NOTE This International Standard is primarily written for adults with disabilities but it includes some specifications regarding the specific accessibility requirements that would suit children with disabilities. However, it is envisaged that more detailed requirements will be included in future revisions of this International Standard.

Building construction -- Accessibility and usability of the built environment

DB44/T 1876-2016 轮扣式钢管脚手架安全技术规程

房屋建筑、道路、桥梁、水坝等土木工程施工中的轮扣式钢管脚手架的设计、施工、验收和使用

Safety technical regulations for wheel buckle steel pipe scaffolding

ANSI/ASTM E699:2016 参与测试 质量保证 和评估制造建筑构件的机构的标准规范

Standard Specification for Agencies Involved in Testing@ Quality Assurance@ and Evaluating of Manufactured Building Components

JZ/T 1-2015 全屋定制家居产品　

本标准规定了全屋定制家居产品术语和定义、分类、材料、一般规定、技术要求、试验方法、检验规则、标志、包装、随行文件、运输和贮存、服务、现场验收。本标准适用于住宅内的定制家具及其配套的装修产品的生产和检验。

The all and the one custom-made housing products

JG/T 482-2015 建筑用光伏遮阳构件通用技术条件

本标准规定了建筑用光伏遮阳构件的术语和定义、分类和标记、一般要求、要求、试验方法。 本标准适用于具有光伏发电功能的建筑外遮阳板式构件。

General requirements for PV shading component of building

DB11/ 637-2015 房屋结构综合安全性鉴定标准

Comprehensive safety appraisal standards for building structures

JC/T 2295-2014 建筑材料及构件复合环境试验 人工光源辐照-冷冻循环试验方法

本标准规定了在人工光源辐照-冷冻循环试验方法的术语和定义、试验设备、试验方法、性能评价以及试验报告。本标准适用于评价在我国寒冷、寒温、干热地区使用的建筑材料与建筑构件在太阳辐照和冷冻交替的条件下的使用、贮存与运输过程中的性能变化。

Comprehensive environment test method for materials and elements of building construction.Artificial radiation-cold test

JC/T 2297-2014 建筑材料及构件复合环境试验 人工光源辐照-雨雪冰冻试验方法

本标准规定了在人工光源辐照下的雨雪冰冻试验方法的术语和定义、试验设备、试验方法以及试验报告。本标准适用于评价在我国冬季有冻雨地区使用的建筑材料与建筑构件,在太阳辐照并伴有降雨及冰冻条件下的使用、贮存与运输过程中的性能和变化。

Comprehensive environment test method for materials and elements of building construction.Artificial radiation-rain-freeze test