91.060.50 门窗 标准查询与下载
共找到 1672 条与 门窗 相关的标准，共 112 页
本标准适用于一般多层住宅和类似建筑，供设计、制造选用；并与有关玻璃尺寸、钢窗型材及五金零件配套使用。
Basic size system of side hung steel window (25mm solid section)
- ICS
- 91.060.50
- CCS
- Q70
- 发布
- 1986-01-31
- 实施
- 1986-11-01
本标准适用于一般民用和工业建筑，供设计、制造选用；并与有关玻璃尺寸、钢窗型材及五金零件等配套使用。
Basic size system of side hung steel door ( 32, 40mm solid section)
- ICS
- 91.060.50
- CCS
- Q70
- 发布
- 1986-01-31
- 实施
- 1986-11-01
制定本标准的目的，是为了在建筑图上采用统一的标志符号，用以表达门、窗扇的开、关方向，区分和表达每扇门窗扇的开、关面。
Symbolic designation of direction of opening and closing and faces of doors and windows
- ICS
- 91.060.50
- CCS
- Q70
- 发布
- 1986-01-31
- 实施
- 1986-11-01
本标准适用于各类材质内、外墙体的工业与民用等建筑物、构筑物，供建筑门窗和与门窗有关构配件的设计制造、施工安装等工作使用。
Size system of opening for doors and windows in building
- ICS
- 91.060.50
- CCS
- Q70
- 发布
- 1986-01-31
- 实施
- 1986-11-01
建筑门窗术语是建筑门窗综合标准中门窗基础标准的一部分，它不仅是建筑部门要遵守的术语标准，也是全国所有部门当涉及门窗构件时必须遵守的术语标准。 本标准是对目前建筑门窗常用的术语所作的规定，供有关部门和单位在国内和国际各项工作中使用。在制订、修订标准和教学、科研、设计、制造、安装以及编写文件和书刊，当遇有这些术语时，均应执行本标准的规定。
Doors and windows for building--Terminology
- ICS
- 91.060.50
- CCS
- Q70
- 发布
- 1986-01-31
- 实施
- 1986-11-01
General technical requirements for building curtain walls, doors and windows
- ICS
- 91.060.50
- CCS
- P32
- 发布
- 实施
前言 1 范围 2 规范性引用文件 3 术语和定义 4 基本要求 5 材料 6 设计 7 安装施工
Technical specification for installation of windows and doors in civil buildings
- ICS
- 91.060.50
- CCS
- E501
- 发布
- 2024-06-06
- 实施
- 2024-06-06
本文件规定了推拉门隐藏轨道通用装置（以下简称“装置”）的术语和定义、技术要求、试验方法、检验规则、产品标志、合格证书、使用说明书、包装、运输、贮存。 本文件适用于推拉门安装使用。
Universal device for hidden track of sliding door
- ICS
- 91.060.50
- CCS
- C331
- 发布
- 2024-06-05
- 实施
- 2024-06-28
1.1 This specification covers the design, manufacture, and testing of sliding watertight door assemblies intended to ensure the watertight integrity of personnel access openings in watertight bulkheads. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Sliding Watertight Door Assemblies
- ICS
- 91.060.50
- CCS
- 发布
- 2024-06-05
- 实施
本文件规定了断桥铝系统门窗的材料、设计、性能、制造、质量控制、标识和标签、包装和运输、检验和测试等要求。 本文件适用于断桥铝合金型材制成的门窗系统，包括但不限于住宅、商业和工业建筑中使用的各类门窗产品。
Thermal break aluminum system door and window standards
- ICS
- 91.060.50
- CCS
- E501
- 发布
- 2024-05-16
- 实施
- 2024-06-16
本文件规定了节能多腔隔热金属门窗的材料、技术要求、试验方法、检验规则、标志、随行文件、包装、运输和贮存。
Energy saving multi chamber insulated metal doors and windows
- ICS
- 91.060.50
- CCS
- C331
- 发布
- 2024-05-11
- 实施
- 2024-05-30
本文件规定了木质防火门扇的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于木质防火门扇的生产和检验。
Wooden fire door leaf
- ICS
- 91.060.50
- CCS
- E501
- 发布
- 2024-04-29
- 实施
- 2024-05-14
ISO 19467:2017 specifies a method to measure the solar heat gain coefficient of complete windows and doors. ISO 19467:2017 applies to windows and doors a) with various types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity coatings, and with spaces filled with air or other gases), b) with opaque panels, c) with various types of frames (wood, plastic, metallic with and without thermal barrier or any combination of materials), d) with various types of shading devices (blind, screen, film or any attachment with shading effects), e) with various types of active solar fenestration systems [building-integrated PV systems (BIPV) or building-integrated solar thermal collectors (BIST)]. ISO 19467:2017 does not include the following: a) shading effects of building elements (e.g. eaves, sleeve wall, etc.); b) heat transfer caused by air leakage between indoors and outdoors; c) ventilation of air spaces in double and coupled windows; d) thermal bridge effects at the rebate or joint between the window or door frame and the rest of the building envelope. ISO 19467:2017 does not apply to the following: a) non-vertical windows; b) curtain walls; c) industrial, commercial and garage doors.
Thermal performance of windows and doors — Determination of solar heat gain coefficient using solar simulator
- ICS
- 91.060.50
- CCS
- 发布
- 2024-04-25
- 实施
本文件规定了住宅室内装饰装修门窗工程的术语和定义、基本要求、测量技术规程、安装技术规程及安装质量要求内容。
Technical specification for quality acceptance of door and window works for residential interior decoration
- ICS
- 91.060.50
- CCS
- C331
- 发布
- 2024-04-08
- 实施
- 2024-04-20
本文件规定了装配式建筑门窗的术语和定义、基本要求、设计要求、加工要求、安装要求、标志、包装、运输和贮存等内容。
General technical requirements for prefabricated building doors and windows
- ICS
- 91.060.50
- CCS
- C331
- 发布
- 2024-03-29
- 实施
- 2024-04-01
本文件规定了金属门窗生产用组装固定设备的术语和定义、组成及结构、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于金属门窗生产用组装固定设备（以下简称“设备”），其他组装固定设备可参考使用。
Assembly and fixing equipment for metal door and window production
- ICS
- 91.060.50
- CCS
- E509
- 发布
- 2024-03-27
- 实施
- 2024-04-11
本标准规定的技术指标已经达到河北省《超低能耗居住建筑节能设计标准》和《超低能耗公共建筑节能设计标准》等有关规定，在国内属于较高的节能水平。
Hebei Province Building Doors and Windows Energy Saving Level Certification Management Measures
- ICS
- 91.060.50
- CCS
- E4710
- 发布
- 2024-03-22
- 实施
- 2024-04-01
BS EN 14501:2021/prA1 Blinds and shutters - Thermal and visual comfort -Performance characteristics and classification
- ICS
- 91.060.50
- CCS
- 发布
- 2024-03-21
- 实施
- 2024-03-21
本文件规定了医院用人脸识别门禁系统的系统组成、总体要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存。
Hospital-use face recognition access control system
- ICS
- 91.060.50
- CCS
- I651
- 发布
- 2024-03-01
- 实施
- 2024-03-20
本文件规定了智能空降门的术语和定义、产品外观、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于智能空降门的生产及检验。
Intelligent airborne door
- ICS
- 91.060.50
- CCS
- F517
- 发布
- 2024-01-24
- 实施
- 2024-02-08
