91.080.01 建筑结构综合 标准查询与下载

DS/ISO 2394:2008 结构可靠性的一般原则

This International Standard specifies general principles for the verification of the reliability of structures subjected to known or foreseeable types of action. Reliability is considered in relation to the performance of the structure throughout its design working life.The general principles are applicable to the design of complete structures (buildings, bridges, industrial structures, etc.), the structural elements making up the structure and the foundations.This International Standard is also applicable to the successive stages in construction, namely the fabrication of structural elements, the transport and handling of the structural elements, their ere

General principles on reliability for structures

GOST 31251-2008 建筑立面.着火危险测试方法

Facades of buildings. Fire hazard test method

NF P06-140/NA*NF EN 1991-4/NA:2007 欧洲法规1 对结构的作用 第4部分 筒仓和槽罐 NF EN 1991-4-2007国家附录 筒仓和槽罐

Eurocode 1 : actions on structures - Part 4 : silos and tanks - National annex to NF EN 1991-4:2007 - Silos and tanks.

ISO 22111:2007 结构设计基础 一般要求

This International Standard specifies the general requirements for the structural design of buildings and industrial and civil engineering structures using reliability-based concepts. This International Standard is applicable to the design of complete structures, the structural elements making up the structure and the foundation. Information on the assessment of existing structures is given in ISO 13822. To allow for the differences in design practice between different countries, certain parameters are left to be quantified by national building codes or standards.

Bases for design of structures - General requirements

ISO 21650:2007 水波和水流对海岸建筑物的影响

This International Standard describes the principles of determining the wave and current actions on structures of the following types in the coastal zone and estuaries: - breakwaters: - rubble mound breakwaters; - vertical and composite breakwaters; - wave screens; - floating breakwaters; - coastal dykes; - seawalls; - cylindrical structures (jetties, dolphins, lighthouses, pipelines etc.). For the rubble mound structures it is not possible to determine the forces on and the stability of each individual armour unit because of the complex flow around and between each armour unit. But there are formulae and principles to estimate the necessary armour unit mass given the design wave conditions. Coefficients in these formulae are based on hydraulic model tests. Since the rubble mound structures are heavily used, they are included in this International Standard, although they may not be treated exactly in accordance with ISO 2394. This International Standard does not include breakwater layout for harbours, layout of structures to manage sediment transport, scour and beach stability or the response of flexible dynamic structures, except vortex induced vibrations. Design will be performed at different levels of detail: - concepts; - feasibility; - detailed design. This International Standard is aimed at serving the detailed design. It is pointed out that the annexes are only informative and are not guidelines/manuals. The annexes have no regulatory power. Wave and current conditions vary for different construction sites. It is very important to assess the wave and current conditions at a given site. Assessment procedures for these conditions and for their uncertainties are included.

Actions from waves and currents on coastal structures

BIP PP 1990-2007 Pk of 5 结构设计的学生用结构欧洲代码摘要

Extracts from the Structural Eurocodes for students of structural design

DB21/T 1521-2007 自燃煤矸石混凝土结构技术规程

Technical regulations for spontaneous combustion coal gangue concrete structures

ABNT NBR 9062-2006 设计和执行的混凝土预制件

Design and execution of precast concrete parts

CECS 188-2005 钢管混凝土叠合柱结构技术规程

本规程适用于采用钢管混凝土叠合柱结构的非抗震和抗震设防烈度为6～9度的民用建筑结构的设计及施工。钢管混凝土叠合柱的钢管混凝土部分和钢管外钢筋混凝土部分可不同期施工，也可同期施工。

Technical specification for steel tube-reinforced concrete column structure

AS ISO 13822:2005 构筑物的设计依据．现有构筑物的评估（ISO 13822－2001，MOD）

Provides a basis for assessment of the structural condition of existing structures.

Basis for design of structures - Assessment of existing structures (ISO 13822:2001, MOD)

AS 5104:2005 构筑物可靠性的一般原则

Defines the reliability principles for design of structures.

General principles on reliability for structures

AS ISO 12494:2005 构筑物的大气结冰

Provides information on collection of data on icing and on loads for categories of ice accumulation.

Atmospheric icing of structures

NS 3490-2004 结构设计 可靠性要求

Design of structures Requirements to reliability

NS 3491-12-2004 结构设计设计作用第12部分：地震作用

Design of structures Design actions Part 12: Seismic actions

DS/INF 146:2003 稳健性 背景和原则 指南 2003

The purpose of this DS-guidance is to give the users of Eurocodes an overview of the conception of robustness.

Robustness - Background and principles - Guidance - 2003

SANS 2394:2003 结构可靠性一般原则

Specifies general principles for the verification of the reliability of structures subjected to known or foreseeable types of action. Reliability is considered in relation to the performance of the structure throughout its design working life. The general principles are applicable to the design of complete structures (buildings, bridges, industrial structures, etc.), the structural elements making up the structure and the foundations. Also applicable to the successive stages in construction, namely the fabrication of structural elements, the transport and handling of the structural elements, their erection and all work on site, as well as the use of the structure during its design working life, including maintenance and repair.

General principles on reliability for structures

JGJ 114-2003（条文说明） 钢筋焊接网混凝土结构技术规程

Technical specification for concrete structures reinforced with welded steel fabric(explanation)

AS/NZS 1170.3/SUPP 1:2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Provides background material to the requirements of AS/NZS 1170.3, Snow and ice actions. Clause by clause, it gives the origins of requirements, departures from previous practice and explanations with examples to illustrate their applications. Common problems for design are also discussed.

Structural design actions - Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003)

JGJ 74-2003 建筑工程大模板技术规程

Technical specification for large-area formwork building construction

AS/NZS 1170.3:2003 结构设计行为．冰雪行为

Provides design values of snow and ice actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0, which gives the procedure for structural design. Snow regions are defined and ground snow loads are provided for a range of annual probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and the effect of winds on snow distribution.

Structural design actions - Snow and ice actions