91.080.10 金属结构 标准查询与下载

T/QGCML 862-2023 钢结构超声检测分析系统技术规程

本文件规定了钢结构超声检测分析系统技术规程的基本要求、检测程序、检测流程、运行维护。 本文件适用于钢结构超声检测分析系统。

Technical specification for steel structure ultrasonic testing and analysis system

T/FYGX 041-2023 焊接空心球节点网架结构制作与安装规范

焊接空心球网架结构的结构形式分类，材料要求，构件加工，构件包装及保护，网架现场组装，现场安装，附属结构安装，冬雨季施工，防腐涂装。

Specification for fabrication and installation of grid structure with welded hollow ball nodes

DB15/T 2991-2023 边境地区铁丝网铁栅栏建设技术规范

Technical specifications for the construction of barbed wire and iron fences in border areas

ASTM E1681-23e1 测定金属材料环境辅助开裂阈值应力强度因子的标准试验方法

Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

ASTM E1681-23 测定金属材料环境辅助开裂阈值应力强度因子的标准试验方法

1.1 This test method covers the determination of the environment-assisted cracking threshold stress intensity factor parameters, KIEAC and KEAC, for metallic materials from constant-force testing of fatigue precracked beam or compact fracture specimens and from constant-displacement testing of fatigue precracked bolt-load compact fracture specimens. 1.2 This test method is applicable to environment-assisted cracking in aqueous or other aggressive environments. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength as long as specimens are of sufficient thickness and planar size to meet the size requirements of this test method. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size may be variable and adjusted for yield strength and applied force. Specimen thickness is a variable independent of planar size. 1.5 Specimen configurations other than those contained in this test method may be used, provided that well-established stress intensity calibrations are available and that specimen dimensions are of sufficient size to meet the size requirements of this test method during testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

T/CECS 1328-2023 钢结构耐久性评定标准

本标准共分8章和3个附录，主要内容包括：总则、术语和符号、基本规定、调查与检测、钢构件防腐涂层耐久性评定、钢构件基材耐久性评定、耐久性评级、评定报告等。

Steel structure durability evaluation standard

DB11/T 1832.5-2023 建筑工程施工工艺规程 第5部分：钢结构工程

Construction technology specification for construction engineering part 5: steel structure engineering

T/CCTAS 46-2022 轨道交通隧道装配式复合型材加固技术规程

本文件规定了轨道交通隧道装配式复合型材加固技术的基本规定、检测评定、材料、专项设计、施工准备、加固施工、质量验收及工后维护检修等要求。

Code of practice for rail transit tunnel reinforcement using prefabricated composite structure technology

T/ZS 0336-2022 里氏硬度法现场检测建筑钢材抗拉强度技术规程

前  言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  检测设备　 4.1  一般要求　 4.2  检定　 4.3  保养　 5  检测技术　 5.1  一般要求　 5.2  里氏硬度值测量　 5.3  硬度计算　 6  抗拉强度换算值与推定值　 6.1  抗拉强度换算值　 6.2  数据分析和抗拉强度推定值　 7  检测报告　 附录A（资料性）里氏硬度法现场检测钢材抗拉强度记录表　 附录B（资料性）钢材里氏硬度与抗拉强度换算表　 附录C（规范性）非水平状态检测时硬度修正值　 附录D（规范性）异常数据的判断和处理　 附录E（资料性）格拉布斯检验临界值表　 附录F（资料性）检验批样本容量与推定区间系数　

Technical specification for testing tensile strength of steel construction in site by Leeb-hardness method

T/ZS 0311-2022 钢结构临时建(构)筑物拆除 技术规范

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本要求　 5 工作内容与程序　 6 安全性评估　 6.1 一般要求　 6.2 材料性能评估　 6.3 腐蚀老化与外观损伤评估　 6.4 结构体系评估　 6.5 荷载与作用评估　 6.6 整体安全性评估　 6.7 拆除前计算分析与承载力评估　 7 施工方案设计　 7.1 一般要求　 7.2 高耸结构拆除方案设计　 8 施工过程分析与计算　 8.1 一般要求　 8.2 施工过程分析　 8.3 施工过程模拟计算　 9 施工过程监测与控制　 9.1 一般要求　 9.2 施工监测设备与监测方法　 9.3 监测数据分析与处理　 9.4 施工过程控制　 10 安全管理与文明施工　 10.1 一般要求 10.2 人工拆除安全管理　 10.3 机械拆除安全管理　 10.4 安全防护管理　 10.5 资源化利用　 附录A（资料性）钢结构拆除工作流程　

Technical specifications for the demolition of temporary buildings (structures) of steel structures

ASTM A992/A992M-22 结构钢形状标准规范

1.1 This specification covers rolled steel structural shapes for use in building framing or bridges, or for general structural purposes. 1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order. 1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material; such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Structural Steel Shapes

T/CDAS 008-2022 装配式铝合金房技术规程

本文件规定了装配式铝合金房的基本规定、设计、模块管理、施工安装、验收、使用维护及全链条共享BIM的建立的要求。 本文件适用于不超过2层、建筑层高不高于7 m的装配式铝合金房的设计、制作、安装、验收与维护。装配式铝合金房设计、施工与验收，本规程未做规定者，尚应符合国家现行有关标准的规定。

Technical specification for prefabricated aluminum alloy houses

DB37/T 5215-2022 装配式钢结构住宅现场检测技术标准

本标准适用于装配式钢结构住宅中有关连接、变形、钢材厚度、涂装厚度等的现场检测及检测结果的判定。

On-site inspection technical standard for prefabricated steel structure residences

DB32/T 4242-2022 装配式异形束柱钢结构住宅技术标准

本文件适用于江苏省行政区域内抗震设防烈度为6度至8度的多、高层装配式异形束柱钢结构住宅。

Technical standard for prefabricated special-shaped beam-column steel structure residences

DB37/T 5203-2021 装配式方钢管混凝土组合异形柱结构技术规程

本规程适用于多、高层民用建筑中由方钢管混凝土组合异形柱组成的钢框架结构、钢框架-支撑结构、钢框架-延性墙板结构的设计、施工与验收。

Technical specification for prefabricated square steel tube concrete composite special-shaped column structure

T/QGCML 189-2021 光伏电场沙面防风蚀面支撑方法

本文件规定了光伏电场沙面防风蚀面支撑方法的术语和定义、结构组成、一般要求、技术要求、试验方法、检验方法。 本文件适用于光伏电场沙面防风蚀面支撑技术。

Support method for anti-wind erosion surface on sand surface of photovoltaic electric field

T/FYGX 021-2021 钢结构用焊接空心球节点生产工艺规程

5 钢板与焊接材料入厂检验 ............................................. 3 5.1钢板检验 ....................................................................... 3 5.2焊接材料检验 ................................................................4 5.2.1 包装验收 ................................................................... 4 5.2.2 质量证明书检验 ....................................................... 4 5.2.3 电焊条外观质量检验 ................................................4 5.2.4 焊丝外观质量检验 ....................................................4 5.2.5 其它要求 ................................................................... 4 5.2.6 焊接材料检验抽样规定 ............................................4 6 放样排版 ...........................................................................4 6.1半壳（WS）放样排版 ...................................................4 6.1.1 工序要求 .....................................................................4 6.1.2 技术要求 .....................................................................6 6.1.3 设备、工具、夹具及检验 ........................................ 6 6.2加肋半壳（WSR）放样排版 ........................................ 6 6.2.1 工序要求 .....................................................................6 6.2.2 技术要求 ................................................................... 7 6.2.3 加肋半壳（WSR）下料规格尺寸 .............................7 6.2.4 设备、工具、夹具及检验 ..........................................7 7 肋板放样排版 ....................................................................7 7.1工序要求 ...................................................................... ...7 7.2肋板下料规格尺寸 ......................................................... 8 7.2设备、工具、夹具及检验 ............................................. 8 8 拼接肋板放样排版（切割焊接） .................................... 9 8.1技术要求 ..........................................................................9 8.2 设备、工具、夹具及检验 .............................................. 10 9 半壳、加肋半壳、肋板气割下料 ...................................... 10 9.1数控切割机下料 ................................................................ 10 9.1.1 操作规程 .................................................................. 10 9.1.2 技术要求 .................................................................. 11 9.1.3 设备、工具、夹具及检验 ........................................ 1 9.2手工气割下料 .................................................................. 11 9.2.1 准备工作 .................................................................. 11 9.2.2 操作规程： ................................................................ 11 9.2.3 气割参数规范的选择 ................................................. 12 9.2.4 气割过程 .................................................................. 12 9.2.5 气割速度 .................................................................. 12 9.2.6 气割结束 .................................................................. 12 9.3技术要求 ...................................................................... 13 9.4设备、工具、夹具及检验 ............................................ 13 10 料片肋板清除毛刺 ......................................................... 13 10.1技术要求 ..................................................................... 13 10.2设备、工具、夹具及检验 ........................................... 13 11 半壳（WS、WSR）料片成品、肋板成品的检验 ........ 14 11.1半壳（WS、WSR）料片检验 .................................... 14 11.1.1 技术要求 ................................................................. 14 11.1.2 设备、工具、夹具及检验 ...................................... 14 11.2肋板检验 ..................................................................... 15 11.2.1 技术要求 ................................................................. 15 11.2.2 设备、工具、夹具及检验 ....................................... 15 12 料片（WS、WSR）加热 ................................................ 15 12.1技术要求 ..................................................................... 15 12.1.1 准备工作 ................................................................. 15 12.1.2 装炉 ..................................................................... 15 12.1.3 点火加热 ................................................................. 16 12.1.4 炉堂温度设定 ........................................................... 16 12.1.5 料片钢板加热温度 .................................................... 16 12.1.6 加热过程注意事项 .................................................... 16 12.1.7 料片出炉 ................................................................. 16 12.1.8 料片出炉注意事项 ..................................................... 16 12.2设备、工具、夹具及检验 ............................................. 16 13 半球（WS、WSR）热压成型 ..................................... 17 13.1工序要求 ..................................................................... 17 13.2技术要求 ..................................................................... 17 13.3设备、工具、夹具及检验 ........................................... 18 14 半球(WS、WSR)半成品检验 ....................................... 19 14.1工序要求 ..................................................................... 19 14.2技术要求 ..................................................................... 19 14.5设备、工具、夹具及检验 ........................................... 22 15 半球(WS、WSR)打印钢印 ........................................... 22 15.1工序要求 ..................................................................... 22 15.2技术要求 ..................................................................... 23 15.3设备、工具、夹具及检验 ........................................... 23 16 半球(WS、WSR)车坡口 ................................................ 23 16.1工序要求 ..................................................................... 23 16.2技术要求 ..................................................................... 23 16.3设备、工具、夹具及检验要求 ................................... 24 17 半球(WS、WSR)成品检验 ............................................. 24 17.1工序要求 ..................................................................... 24 17.2技术要求 ..................................................................... 24 18 肋板车加工 ....................................................................... 24 18.1工序要求 ..................................................................... 24 18.2技术要求 ..................................................................... 24 18.3设备、工具、夹具及检验 ............................................ 25 19 肋板打钢印 ....................................................................... 26 19.1工序要求 ..................................................................... 26 19.2设备、工具、夹具及检验 .............................................. 26 20 拼装定位焊 ....................................................................... 27 20.1工序要求 ..................................................................... 27 20.2技术要求 ..................................................................... 27 20.3设备、工具、夹具及检验 ........................................... 27 21 涂刷防溅剂 ....................................................................... 28 21.1工序要求 ..................................................................... 28 21.2技术要求 ..................................................................... 28 21.3设备、工具、夹具及检验 ............................................ 28 22 焊接成型 ......................................................................... 29 22.1工序要求 ..................................................................... 29 22.1.1 准备工作 ................................................................. 29 22.1.2 施焊 ..................................................................... 29 22.2焊接规范 ..................................................................... 29 22.2.1 C02气体保护焊 ....................................................... 29 22.2.2 手工焊接（盖面焊） ............................................... 31 22.2.3 平行双肋空心球焊接 .............................................. 31 22.2.4 焊缝缺陷返修 ............................................................. 31 22.2.5 设备、工具、夹具 ..................................................... 32 22.3技术要求 ..................................................................... 32 22.4设备、工具、夹具及检验 ............................................ 32 23 焊缝及球表面清理 ........................................................... 32 23.1工序要求 ..................................................................... 32 23.2技术要求 ..................................................................... 32 23.3设备、工具、夹具及检验 ........................................... 32 24 成品球验收 ....................................................................... 33 24.1验收要求 ..................................................................... 33 24.2技术要求 ..................................................................... 34 24.3设备、工具、夹具及检验 ........................................... 34 25 抛丸除锈 ......................................................................... 34 25.1工序要求 ..................................................................... 34 25.2设备、工具、夹具 ........................................................ 35 26 表面喷刷除锈剂、喷刷商标 ........................................... 35 26.1工序要求 ..................................................................... 35 26.2技术要求 ..................................................................... 35 26.3设备、工具、夹具及检验 ........................................... 35 27 成品入库 ......................................................................... 35 27.1工序要求 ..................................................................... 35 27.2技术要求 ..................................................................... 35 28 包装出厂 ......................................................................... 35 附录A（规范性） 生产工艺流程图 .................................. 37 附录B（规范性） 成品空心球规格 .................................. 38 附录C（规范性） 焊接球加工参数值 .............................. 40

Production process specification for welded hollow spherical joints for steel structures

DB11/T 1887-2021 索结构工程施工质量验收标准

Acceptance standard for construction quality of cable structure engineering

DB32/T 4116-2021 里氏硬度计法建筑结构钢抗拉强度现场检测技术规程

本文件适用于采用里氏硬度法检测并推定工业与民用建筑钢结构工程中型钢（H型钢、工字钢、钢板、槽钢等)抗拉强度的范围，且所测型钢的强度等级不高于Q460级；不适用于经过热处理的钢材强度的测试。

Technical specification for on-site testing of tensile strength of building structural steel by Leeb hardness tester method

T/CECS 883-2021 波纹钢综合管廊结构技术标准

主要技术内容包括：总则、术语和符号，基本规定、材料、结构设计、地基基础设计、防腐、防水与防火、加工制作与运输、施工与安装、质量验收、运行与维护管理等。

Technical standard for corrugated steel integrated pipe gallery structure