91.080.10 金属结构 标准查询与下载
共找到 356 条与 金属结构 相关的标准，共 24 页
本标准规定了大直径缓粘结预应力钢绞线的术语和定义、代号和标记、要求、试验方法、检验规则、包装、标志、贮存和使用等。
Large diameter slow bonded prestressed steel strand
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2020-07-06
- 实施
- 2021-01-01
Technical specification for steel structure houses
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2020-07-02
- 实施
- 2021-01-01
Standard Specification for Structural Steel Shapes
- ICS
- 91.080.10
- CCS
- 发布
- 2020-07-01
- 实施
本规程具体拟在冷弯薄壁型钢-轻聚合物复合墙体建筑的建筑设计、结构设计和制作、安装、防腐、验收及维护等方面做技术规定。
Technical specification for cold-formed thin-walled steel frame wall building with lightweight polymer material
- ICS
- 91.080.10
- CCS
- E4710
- 发布
- 2020-04-15
- 实施
- 2020-07-28
Technical specification for damage assessment of steel structures after fire
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2020-03-30
- 实施
- 2020-07-01
本规程适用于工业与民用建筑及构筑物中采用的钢筋桁架楼承板系统的设计、施工和验收。
Technical specification for the application of reinforced truss floor deck system
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2019-12-25
- 实施
- 2020-06-25
Standard specification for protection shelves
- ICS
- 91.080.10
- CCS
- 发布
- 2019-12-19
- 实施
本规程共7章和4个附录，主要技术内容包括：总则、术语和符号、基本规定、结构计算、杆件与节点的设计与构造、制作安装与防护、验收等。
Technical specification for aluminium alloy space frame structures
- ICS
- 91.080.10
- CCS
- E4790
- 发布
- 2019-11-08
- 实施
- 2019-12-17
Technical specification for inspection and assessment of technical status of column advertising facilities on expressways
- ICS
- 91.080.10
- CCS
- P 26
- 发布
- 2019-11-04
- 实施
- 2019-12-04
本标准适用于抗震设防烈度为6度～9度的装配式钢结构铝蜂窝环保房（以下简称：环保房）的施工的术语和定义、基本规定、施工安装、验收
Construction technical specification for prefabricated steel structure aluminum honeycomb environmental protection room
- ICS
- 91.080.10
- CCS
- E4790
- 发布
- 2019-11-01
- 实施
- 2020-05-31
本标准规定了装配式钢结构铝蜂窝环保房（以下简称“环保房”）的术语和定义、型号规格、要求、试验方法、检验规则、标志、包装、运输和贮存
Prefabricated steel structure aluminum honeycomb environmental protection room
- ICS
- 91.080.10
- CCS
- E4790
- 发布
- 2019-11-01
- 实施
- 2020-05-31
本规程共分10章，主要内容包括：总则、术语和符号、基本规定、深化设计交付、深化设计几何模型、施工工艺设计、连接节点深化设计、结构深化设计文件编制、施工详图设计文件编制、深化设计文件管理。
Specification of detailed design for steel structure engineering
- ICS
- 91.080.10
- CCS
- P30
- 发布
- 2019-07-08
- 实施
- 2020-01-01
本规程共分8章，主要技术内容包括：总则、术语、基本规定、高性能材料、高性能结构体系、高强钢构件及连接、高延性构件及连接、施工和验收。
Technical specification for application of high performance steel building structures
- ICS
- 91.080.10
- CCS
- P32
- 发布
- 2019-06-28
- 实施
- 2019-12-01
本规程共分9章，主要技术内容包括：总则，术语和符号，基本规定，建筑设计，结构设计，楼屋盖、墙板与楼梯设计，地基基础，防腐与防火，施工、验收及维护。
Technical specification for buildings with floor-by-floor assembled steel braced frames
- ICS
- 91.080.10
- CCS
- P30/39
- 发布
- 2019-06-28
- 实施
- 2019-12-01
1 Scope This part of PD 6702 gives guidance on the use of the following parts of BS EN 1999, Design of aluminium structures : • Part 1-1, General structural rules; • Part 1-3, Structures susceptible to fatigue. It is applicable to the same scope of application as BS EN 1999 unless otherwise stated. The design information included in this document is applicable only when the recommendations in PD 6705-3 are followed for the execution of the structure. NOTE This document covers those items identified in the UK National Annexes to BS EN 1999‑1‑1 and BS EN 1999‑1‑3 as requiring additional guidance. Further material, not necessarily identified in the relevant National Annex, is also given for information.
Structural use of aluminium - Recommendations for the design of aluminium structures to BS EN 1999
- ICS
- 91.080.10
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
Standard specification for landing gates of construction hoist
- ICS
- 91.080.10
- CCS
- 发布
- 2018-12-18
- 实施
Standard specification for landing gates of construction hoist
- ICS
- 91.080.10
- CCS
- 发布
- 2018-12-18
- 实施
Technical specification for construction of composite aluminum alloy formwork for construction engineering
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2018-12-17
- 实施
- 2019-04-01
1.1 This specification covers two grades, 36 [250] and 50 [345] of rolled steel structural shapes and plates with low yield to tensile ratio for use in building framing or for general structural purposes. 1.2 All shape profiles with a flange width of 6 in. [150 mm] and greater described in Specification A6/A6M, Annex A2, and plates up to and including 5 in. [125 mm] thick are included in this specification. 1.3 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order. 1.4 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material; such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
- ICS
- 91.080.10
- CCS
- 发布
- 2018-11-01
- 实施
Materials for substructure of hinged ventilated facade systems. General technical requirements
- ICS
- 91.080.10
- CCS
- 发布
- 2018-00-00
- 实施
- 2019-01-01
