91.080.10 金属结构 标准查询与下载
共找到 356 条与 金属结构 相关的标准，共 24 页
Building steel structures. General specifications
- ICS
- 91.080.10
- CCS
- 发布
- 2012
- 实施
- 2013-07-01
North American Standard for Cold-Formed Steel Framing - General Provisions
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2012
- 实施
Structural steelwork. Layout of holes in rolled shapes. Dimensions
- ICS
- 91.080.10
- CCS
- 发布
- 2012
- 实施
- 2013-07-01
本标准规定了钢筋滚轧直螺纹连接套筒的术语和定义、分类与型号、要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于工业与民用建筑的钢筋混凝土结构中钢筋直径为12mm ～50mm的钢筋机械连接使用的直螺纹套筒。
Straight threaded connecting sleeve for steel bar rolling in construction
- ICS
- 91.080.10
- CCS
- F26
- 发布
- 2011/11/30
- 实施
- 2011/11/30
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
- ICS
- 91.080.10
- CCS
- 发布
- 2011-11-30
- 实施
- 2011-11-30
This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics. This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures. The components can be used directly or in construction works or as structural components in the form of kits. This European Standard applies to series and non-series structural components including kits. The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e. g. anodising of aluminium. This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4. This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems. NOTE For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-11
- 实施
Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10-01
- 实施
Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10-01
- 实施
- 2011-10-21
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008+A1:2011
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10
- 实施
"Factory production control according to DIN EN 1090-1/-2 for representative building structures, supporting structures and components made of steel using the example of an extension balcony in EXC 1"
- ICS
- 91.080.10
- CCS
- 发布
- 2011-10
- 实施
This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:- hot rolled, structural steel products up to and including grade S690;- cold formed components and sheeting up to and including grades S700;- hot finished and cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;- hot finished and cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.This European Standard may also be used for structural steel grades up to and including S960, provided that conditions f
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
- ICS
- 91.080.10
- CCS
- 发布
- 2011-09-30
- 实施
- 2011-09-30
"Prerequisites and procedures for the certification of manufacturers/distributors according to DIN EN 1090-1, ""Execution of steel supporting structures and aluminium supporting structures - Part 1: Procedures for proving the conformity of load-bearing co
- ICS
- 91.080.10
- CCS
- 发布
- 2011-09
- 实施
本标准规定了轻钢结构拆装式活动板房（以下简称“活动板房”）的术语和定义、分类与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以轻钢结构为承重结构，由彩钢夹芯板或玻镁平板等作为围护结构的拆装式临时用房，使用年限一般不超过五年。
Light steel structure disassembled prefabricated house
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-08-22
- 实施
- 2011-11-15
本标准规定了建筑工程用索（以下简称拉索）的术语和符号、分类、代号与标记、一般要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于建筑工程各类结构用索。
Cable for building engineering
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-07-13
- 实施
- 2012-02-01
本标准规定了水工金属结构技术术语及其基本定义。 本标准适用于水利水电工程闸门、阀门、拦污栅、压力钢管、启闭机和清污机等水工金属结构的设计、制作、安装及检验等。
Terms of hydro steel structure
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-06-01
- 实施
- 2011-09-01
1 本文规定了建筑结构用离心工艺制造铸钢管的牌号表示法、技术要求、制造工艺与交货状态、试验方法、检验规则及标识、包装和质量证明书等。 2 本标准适用于离心铸造工艺生产的铸钢管（以下简称铸钢管），产品主要用于建筑钢结构，塔栀结构与桥梁结构等。
Casting steel tubes for building structures
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-05-09
- 实施
- 2011-10-01
Provides design methods for determining the strength [resistance] and stiffness of cold-formed steel nonstructural members that are not a part of the gravity and lateral load resistance systems.
North American Standard for Cold-Formed Steel Framing - Nonstructural Members
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011
- 实施
Provides a new standard for quality control and quality assurance for installation of steel deck to be used by designers, specifiers, manufacturers, and installers of steel deck used in floors and roofs. The specification sets guidelines and requirements for quality control and quality assurance for installation of steel deck. Non-mandatory user notes and commentary are included for further clarification and guidance.
Standard for Quality Control and Quality Assurance for Installation of Steel Deck
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011
- 实施
1.1 This test method describes procedures to establish the relative bond strength of 0.600-in. [15.24-mm] diameter, Grade 270 [1860] steel prestressing strand in cement grout as used in prestressed ground anchors for the purpose of evaluating the effects of manufacturing practices on bond strength. 1.2 The bond strength values obtained are not intended to be used to design the bond length of ground anchors that depend on field conditions. 1.3 This test method is not intended to be used as a bond test for prestressed concrete applications. 1.4 The values stated in either inch-pound or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
- ICS
- 91.080.10
- CCS
- H49
- 发布
- 2011
- 实施
In the absence of specific instructions to the contrary in the contract documents, the trade practice defined in this Code of Standard Practice would govern the design, fabrication and installation of cold-formed steel structural framing.
Code of Standard Practice for Cold-Formed Steel Structural Framing
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011
- 实施
