91.080.30 砖石结构 标准查询与下载

ASTM C1532/C1532M-20 从现有建筑中选择、移除和运输人造砌体和砌体试样的标准实施规程

Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

ASTM C1892/C1892M-20 砌体中锚强度的标准试验方法

Standard Test Methods for Strength of Anchors in Masonry

ASTM C1780-20 水泥基粘合砌体单板安装方法的标准实施规程

1.1 This practice is intended to provide accepted procedures to designers and installers of cement-based adhered masonry veneer in residential and commercial construction. This information is meant to complement the specific installation instructions provided by manufacturers of cement-based adhered masonry veneers and recognized building codes, but is not meant to replace them. This practice does not address installation methods or techniques for all materials in the building envelope. This practice covers the installation of cement-based adhered masonry veneer units for application as adhered veneer to exterior and interior walls, columns, landscape structures and other structures suitable to receive adhered veneer. The units included in this practice are manufactured to meet the requirements of Specification C1670/C1670M or C1877. This practice is limited to the installation of units. This practice does not cover all flashing or moisture management requirements. Refer to the applicable building code and project documents for additional flashing and moisture management requirements. NOTE 1—The National Concrete Masonry Association (NCMA) publication Installation Guide and Detailing Options for Compliance with ASTM C1780 for Adhered Manufactured Stone Veneer provides generally accepted methods and details for installation and flashing for manufactured stone veneer. NOTE 2—This standard was developed for the installation of cementbased adhered veneer units manufactured from wet-cast concrete or dry-cast concrete. Refer to Guide C1242 for installation of adhered natural stone veneer. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 All workmanship and materials related to the installation of cement-based adhered masonry veneer units shall meet the requirements of the contract documents and building code having jurisdiction over the project. 1.4 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2 ) 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer

DB11/T 742-2019 轻集料混凝土填充砌块技术规程

Technical specification for lightweight aggregate concrete filled blocks

ASTM C1892/C1892M-19e1 砌体中锚强度的标准试验方法

Standard Test Methods for Strength of Anchors in Masonry

ASTM C1532/C1532M-19a 从现有建筑中选择、移除和运输人造砌体和砌体试样的标准实施规程

Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

ASTM C1825-19 砌块规范制定的标准指南

1.1 This guide provides general guidance for developing ASTM unit specification for masonry units manufactured with constituent materials, manufacturing methods, and combinations thereof, that are not included in a current ASTM standard. This guide shall not be construed as permitting the use of a product conflicting with requirements of the governing building code. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Developing Specifications for Masonry Units

ASTM C1364-19 建筑铸石标准规范

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specification include both wet cast and vibratory dry tamp products. Production methods of cast stone can vary among manufacturers; many production methods are acceptable provided the delivered cast stone meets the requirements of this specification. 1.3 Surface textures, finish, color, special applications, or other features shall be specified by the purchaser. Slump, manufacturing method, and apparatus shall be selected by the manufacturer and not specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Architectural Cast Stone

ASTM C1532/C1532M-19 从现有建筑中选择、移除和运输人造砌体和砌体试样的标准实施规程

Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

ASTM C1364-18 建筑铸石标准规范

Standard Specification for Architectural Cast Stone

ASTM C1780-18a 粘合的人造石饰面的安装方法的标准实施规程

Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

ASTM C1780-18 粘合的人造石饰面的安装方法的标准实施规程

Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

ASTM C1825-18e1 砌块规范制定的标准指南

Standard Guide for Developing Specifications for Masonry Units

ASTM C1825-18 砌块规范制定的标准指南

Standard Guide for Developing Specifications for Masonry Units

DIN 1053-41:2018 砌体 第41部分：根据 DIN 1053-4 预制砌体复合单元的合格评定

This standard specifies requirements and specifications for the conformity assessment of prefabricated masonry compound units according to DIN 1053-4.

Masonry - Part 41: Conformity assessment of prefabricated masonry compound units according to DIN 1053-4

DB37/ 5090-2017 蒸压灰砂砖砌体技术规程

本规程适用于山东省行政区域内抗震设防烈度8度及 8度以下地区，以蒸压灰砂砖为墙体材料的砌体结构的设计、施工及施工质量验收。

Technical specification for autoclaved lime-sand brick masonry

DB23/ 715-2017 黑龙江省建筑工程施工质量验收标准 砌体结构工程

Construction Quality Acceptance Standards of Heilongjiang Construction Engineering Masonry Structure Engineering

ASTM C1364-17 建筑用铸石的标准规格

1.1 This specification includes the physical properties, sampling, testing, tolerance, and appearance requirements for architectural cast stone. 1.2 Cast stone units covered under this specification include both wet cast and vibratory dry tamp products. Production methods of cast stone can vary among manufacturers; many production methods are acceptable provided the delivered cast stone meets the requirements of this specification. 1.3 Surface textures, finish, color, special applications, or other features shall be specified by the purchaser. Slump, manufacturing method, and apparatus shall be selected by the manufacturer and not specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Architectural Cast Stone

ASTM C1552-16 混凝土砌块单位 相关单位和砖石棱柱压缩试验标准实践

1.1 This practice covers apparatus, materials, and procedures for capping concrete masonry units, related units, including coupons or other specimens obtained from such units, and masonry prisms for compression testing. NOTE 1—The testing laboratory performing these test methods should be evaluated in accordance with Practice C1093. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

DIN EN 845-3:2016 砖石工程辅助部件规格.第3部分:钢丝网底层接缝加强筋.德文版本EN 845-3-2013+A1-2016

Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2013+A1:2016