91.080.30 砖石结构 标准查询与下载
共找到 287 条与 砖石结构 相关的标准，共 20 页
本规程适用于安徽省境内抗震设防烈度在7度及以下的地区，以烧结多孔砖作为墙体材料进行砌体工程施工、验收的一般工业与民用建筑。 在烧结多孔砖砌体工程施工及质量验收时，除遵守本规程规定外，尚应符合国家现行有关标准、规程和规范的规定。
Regulations for construction and quality acceptance of sintered porous brick masonry
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-09-21
- 实施
- 2013-03-21
本规程适用于安徽省境内抗震设防烈度小于或等于7度地区，以混凝土小型空心砌块为墙体材料的新建、扩建、改建的房屋建筑工程施工及质量验收。 混凝土小型空心砌块砌体工程施工及质量质量验收，除执行本规程的规定，尚应满足现行国家和行业有关标准、规范、规程的要求。
Code for construction and quality acceptance of small concrete hollow block masonry projects
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-09-21
- 实施
- 2013-03-21
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-09-17
- 实施
- 2012-09-17
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-09-17
- 实施
- 2012-09-17
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-09-17
- 实施
- 2012-09-17
This European Standard specifies a method for determining the in plane initial shear strength of the horizontal bed joint between the prefabricated part of a composite lintel and the masonry above it, using a specimen tested in shear. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report. The method corresponds with the method described in EN 1052-3:2003+A1:2006. Guidance is given where the method deviates from EN 1052-3. Therefore, each section of EN 1052-3 is repeated given the necessary changes.
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
- ICS
- 91.080.30
- CCS
- 发布
- 2012-09-12
- 实施
- 2012-12-31
Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-08-31
- 实施
- 2012-08-31
Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-08-31
- 实施
- 2012-08-31
Methods of test for ancillary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-08-31
- 实施
- 2012-08-31
This European Standard specifies the couplet method for determining the horizontal and vertical shear load resistance and load-deflection behaviour of shear ties and slip ties embedded in mortar joints. The test is intended for ties for connecting together two leaves of masonry forming a collar jointed wall or two walls at right angles. It also applies to ties used for connecting the edges of infill panel walls to frames which encircle them.
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-08-01
- 实施
This European Standard specifies the couplet method for determining the tensile and compressive load capacity and load displacement characteristics of wall ties embedded in mortar joints. The test is intended for ties used for connecting together two leaves of masonry and for the mortar-bedded end of ties for connecting masonry leaves to other structures.
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-08-01
- 实施
This European Standard specifies a method for determining the tensile and compressive load capacity and load displacement characteristics of wall ties screwed, nailed, grouted or otherwise attached to frame elements or to inner leaf materials. The test is intended for ties for connecting masonry leaves to frame structures and to the inner leaves of cavity walls other than by embedding the inner connection in a mortar joint.
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
- ICS
- 91.080.30
- CCS
- 发布
- 2012-08-01
- 实施
This European Standard specifies procedures for the determination of thermal properties of masonry and masonry products.
Masonry and masonry products - Methods for determining thermal properties
- ICS
- 91.080.30
- CCS
- 发布
- 2012-07-15
- 实施
- 2012-07-15
为使混凝土空心砖在工程施工中做到技术先进、经济合理、确保质量、安全适用，特制定本规程。 本规程适用于在安徽省内使用混凝土空心砖作为填充墙砌体工程施工的一般工业与民用建筑。 本规程依据《非承重混凝土空心砖》GB/T 24492、《混凝土小型空心砌块建筑技术规程》JGJ/T 14、《建筑工程施工质量验收统一标准》GB 50300、《砌体工程施工质量验收规范》GB 50203 和安徽省标准图集《非承重混凝土空心砖、复合保温砖墙体建筑构造》皖 2010J122，并结合混凝土空心砖实际施工经验编制。
Construction quality and acceptance regulations of concrete hollow brick masonry project
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-02-23
- 实施
- 2012-03-23
本规程适用于非抗震地区和抗震设防烈度为6至8度地区新建、改建和扩建的民用建筑采用非承重混凝土复合保温砖砌体工程的房屋建筑设计、施工及验收。新建工业建筑和既有建筑节能改造可参考执行。 本规程依据《非承重混凝土空心砖》GB/T 24492、《混凝土复合隔热保温砖》Q/DSJC 08、《混凝土小型空心砌块建筑技术规程》JGJ/T 14、《建筑工程施工质量验收统一标准》GB 50300、《砌体工程施工质量验收规范》GB 50203 和安徽省标准图集《非承重混凝土空心砖、复合保温砖墙体建筑构造》皖2010J122，
Application technical specification for self-insulation system of non-load-bearing concrete composite insulation bricklaying
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2012-02-23
- 实施
- 2012-03-23
Masonry and masonry products. Methods for determining estimates of the thermal protection
- ICS
- 91.080.30
- CCS
- 发布
- 2012
- 实施
- 2013-07-01
本标准规定了橄榄[Caaariuffl album (Lour.) Rauesch.]种质资源鉴定的技术要求和方法。 本标准适用于橄榄[Ca/arium album (Lour.) auesch.]种资资源的植物学特征、生物学特性、果实性状的鉴定，亦可供橄榄属其他种的资源鉴定参照执行。
Artificial marble building board
- ICS
- 91.080.30
- CCS
- Q21
- 发布
- 2011-07-01
- 实施
- 2011-10-01
本标准规定了建筑装饰用石材蜂窝复合板的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑幕墙及其他装饰用石材蜂窝板。
Stone face honeycomb composite panel for building decoration
- ICS
- 91.080.30
- CCS
- Q21
- 发布
- 2011-06-03
- 实施
- 2011-12-01
Masonry - Part 4: Prefabricated masonry compound units
- ICS
- 91.080.30
- CCS
- P24
- 发布
- 2011-05
- 实施
Technical specification for autoclaved fly ash brick construction
- ICS
- 91.080.30
- CCS
- Q21
- 发布
- 2010-11-03
- 实施
- 2010-12-03
