91.100.23 标准查询与下载

DIN EN 14411:2007 陶瓷砖.定义、分类、特性和标记

This European Standard defines and gives terms, specifies requirements and marking criteria for ceramic tiles (produced by extrusion and dry-pressing techniques) of the best commercial quality (first quality). Tiles not of first commercial quality are also covered following the provisions of Annex Q. This European Standard does not cover tiles made by other than the normal processes of extrusion or dry-pressing nor decorative accessories or trim (such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces) or mosaics (i.e. any piece that can fit into a 7 cm x 7 cm area, see custom nomenclature). NOTE EN ISO 10545 describes the test procedures required to determine the product characteristics listed in this European Standard. EN ISO 10545 is divided into parts, each describing a specific test procedure or related matter.

Ceramic tiles - Definitions, classification, characteristics and marking; English version of DIN EN 14411:2007-03

AS 4459.16:2005 瓷砖的取样和试样方法．小色差测定（ISO 10545－16：1999 MOD）

Methods of sampling and testing ceramic tiles - Determination of small colour differences (ISO 10545-16:1999 MOD)

SANS 22:2005 釉面瓷砖和配件

Covers glazed ceramic wall tiles and fittings produced from any suitable combination of intimately mixed clays, shales, flints, feldspars, or other inorganic materials.

Glazed ceramic wall tiles and fittings

AS 4992.3:2004 瓷砖：安装用产品．水泥浆：定义和规格要求

Provides product terminology, work methods and application properties for ceramic tile grouts.

Ceramic tiles: Products for installation - Grouts: Definitions and specifications

AS 4992.4:2004 瓷砖：安装用产品．水泥浆：试验方法

Provides methods for determining characteristics of grouts used in the installation of ceramic tiles.

Ceramic tiles: Products for installation - Grouts: Test methods

ISO 10545-9:2004 陶瓷砖.第4部分:抗热冲击的测定

This part of ISO 10545 specifies a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use. Depending on the water absorption of the tiles, different procedures (tests with or without immersion) are used unless there is an agreement to the contrary. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Part 9: Determination of resistance to thermal shock

ISO 10545-4:2004 陶瓷砖.第4部分:断裂模数和抗断强度的测定

This part of ISO 10545 specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength

DS/CEN/TR 13548:2004 瓷砖设计和安装的一般规则

This Technical Report applies to internal and external floor and wall ceramic tiling, installed by both cement mortar and adhesive methods. The aim of this Technical Report is to define the quality of ceramic tiling and the main general rules associated with materials selection, design, installation and use that should be followed to ensure that the required levels of quality and performance are achieved. Note: The quality of ceramic tiling depends on compliance with the following general requirements: - regularity - durability - safety Compliance with these requirements shall be achieved with the simultaneous and indispensable contribution of all the ""fun

General rules for the design and installation of ceramic tiling

BS EN 14411:2003 瓷砖.定义、分类、特点和标记

This European Standard defines and gives terms, requirements and marking criteria for ceramic tiles (produced by extrusion and dust pressing techniques) of the first commercial quality. Tiles not of first commercial quality are also covered following the provisions of annex Q. This European Standard does not cover tiles made by other than the normal commercial processes of extrusion or dry pressing (see 3.7). NOTE ISO 10545 describes the test procedures required to determine the product characteristics listed in ISO 13006. ISO 10545 is divided into parts each describing a specific test procedure or related matter.

Ceramic tiles - Definitions, classification, characteristics and marking

AS 4992.1(Int):2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Ceramic tiles: Products for installation - Adhesive: Definitions and specifications

AS 4992.2(Int):2003 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Ceramic tiles: Products for installation - Adhesives: Test methods

DS/EN ISO 10545-7+AC:2000 瓷砖 第7部分：釉面砖表面耐磨性的测定

This part of ISO 10545 specifies a method for determining the resistance to surface abrasion of all glazed ceramic tiles used for floor covering.

Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles

NF P61-545*NF EN ISO 10545-7:1999 瓷砖.第7部分:釉面砖表面耐磨损性测定.(EN ISO 10545-7)

Ceramic tiles. Part 7 : determination of resistance to surface abrasion for glazed tiles.

BS EN ISO 10545-7:1999 瓷砖.上釉瓷砖表面抗磨损性的测定

Tiles are subject to a rotating abrasive load and the wear assessed visually.

Ceramic tiles - Determination of resistance to surface abrasion for glazed tiles

DIN EN ISO 10545-7:1999 瓷砖.第7部分:上釉瓷砖表面抗磨损性测定

The document specifies a test method for the determination the resistance to surface abrasion of all glazed ceramic tiles used for floor covering.

Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996); German version EN ISO 10545-7:1999

ISO 10545-16:1999 瓷砖.第16部分:小色差的测定

This part of ISO 10545 describes a method for utilizing colour measuring instruments for quantifying the small colour differences between plain coloured glazed ceramic tiles, which are designed to be of uniform and consistent colour. It permits the specification of a maximum acceptable value which depends only on the closeness of match and not on the nature of the colour difference. Colour variations produced for artistic purposes are not covered in this part of ISO 10545. NOTE This test should only be used when small colour differences between plain coloured glazed tiles are important in a specification.

Ceramic tiles - Part 16: Determination of small colour differences

EN ISO 10545-7:1998 瓷砖.第7部分:釉面瓷砖表面耐磨损性的测定(ISO 10545-7:1996)

Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles

NF P61-544*NF EN ISO 10545-5:1998 瓷砖.第5部分:通过测量恢复系数测定抗冲击性

Ceramic tiles. Part 5 : determination of impact resistance by measurement of coefficient of restitution.

DS/EN ISO 10545-5:1998 瓷砖 第5部分：通过测量恢复系数测定抗冲击性

This part of the standard specifies a test method for determining the impact resistance of ceramic tiles by measuring the coefficient of restitution.

Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution

DS/EN ISO 10545-12:1998 瓷砖 第12部分：抗冻性的测定

This part of EN ISO 10545 specifies a method for determining the frost resistance of all ceramic tiles intended for use in freezing conditions in the presence of water.

Ceramic tiles - Part 12: Determination of frost resistance