91.100.23 标准查询与下载

EN ISO 10545-1:1997 陶瓷砖.第1部分:抽样和验收条件;代替EN 163-1991;ISO 10545-1-1995

Ceramic Tiles - Part 1: Sampling and Basis for Acceptance Supersedes EN 163: 1991; ISO 10545-1: 1995

EN ISO 10545-15:1997 瓷砖.第15部分:有釉砖铅和镉析出量的测定ISO 10545-15-1995

Ceramic Tiles - Part 15: Determination of Lead and Cadmium Given off by Glazed Tiles ISO 10545-15: 1995

EN ISO 10545-14:1997 瓷砖.第14部分:耐污染性的测定;代替EN 122-1991;ISO 10545-14-1995,包含技术勘误表 1-1997

Ceramic Tiles - Part 14: Determination of Resistance to Stains Supersedes EN 122: 1991; ISO 10545-14: 1995, Including Technical Corrigendum 1: 1997

DS/EN ISO 10545-11:1997 瓷砖 第11部分：釉面砖抗裂性的测定

This part of EN ISO 10545 defines a test method for determining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product.

Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles

DS/EN ISO 10545-8:1997 瓷砖 第8部分：线性热膨胀的测定

This part of EN ISO 10545 defines a test method for determining the coefficient of linear thermal expansion of ceramic tiles.

Ceramic tiles - Part 8: Determination of linear thermal expansion

ISO 10545-14:1995/cor 1:1997 陶瓷砖 第14部分:耐污染性的测定 技术勘误1

Replaces diluted 3 + 97 by 3 % Zeichen(V/V) in subclause 5.1.4.1.

Ceramic tiles - Part 14: Determination of resistance to stains; Technical Corrigendum 1

ISO 10545-12:1995/cor 1:1997 陶瓷砖 第12部分:抗冻性的测定 技术勘误1

Contains minor amendments in subclause 4.2 and subclause 5.1.

Ceramic tiles - Part 12: Determination of frost resistance; Technical Corrigendum 1

ISO 10545-5:1996/cor 1:1997 陶瓷砖 第5部分:用恢复系数确定抗冲击性 技术勘误1

Corrects a numerical value in figure A.1.

Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution; Technical Corrigendum 1

ISO 10545-3:1995/cor 1:1997 陶瓷砖 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 技术勘误1

Contains minor amendments in subclause 3.10 and subclause 5.1.2.

Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density; Technical Corrigendum 1

ISO 10545-2:1995/cor 1:1997 陶瓷砖 第2部分:尺寸和表面质量的检验 技术勘误1

Contains minor amendments in subclause 4.2 and in subclause 6.1.2 and subclause 6.1.3.

Ceramic tiles - Part 2: Determination of dimensions and surface quality; Technical Corrigendum 1

BS EN ISO 10545-11:1996 瓷砖.釉面砖抗裂纹的测量

This part of ISO 10545 defines a test method for de-termining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product. NOTE 1 ISO 13006:— Ceramic tiles —Definitions, classification, characteristics and marking (to be published), provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Determination of crazing resistance for glazed tiles

BS EN ISO 10545-9:1996 瓷砖.耐热冲击的测定

This part of ISO 10545 defines a test method for de-termining the resistance to thermal shock of all cer-amic tiles under normal conditions of use. Depending on the water absorption of the tiles, dif-ferent procedures (tests with or without immersion) are used unless there is an agreement to the contrary. NOTE 1 ISO 13006:— Ceramic tiles —Definitions, classification, characteristics and marking (to be published), provides property requirements for tiles and other useful information on these products.

Ceramic tiles. Determination of resistance to thermal shock

BS EN ISO 10545-8:1996 瓷砖.线性热膨胀的测定

This part of ISO 10545 defines a test method for de-termining the coefficient of linear thermal expansion of ceramic tiles. NOTE 1 ISO 13006:— Ceramic tiles —Definitions, classification, characteristics and marking (to be published), provides property requirements for tiles and other useful information on these products.

Ceramic tiles. Determination of linear thermal expansion

NF P61-532:1996 瓷砖.第9部分:耐热冲击力测定(欧洲标准EN ISO 10545-9)

Ceramic tiles. Part 9 : determination of resistance to thermal shock.

NF P61-531:1996 瓷砖.第8部分:线性热膨胀测定(欧洲标准EN ISO 10545-8)

Ceramic tiles. Part 8 : determination of linear thermal expansion.

ISO 10545-7:1996 瓷砖 第7部分 釉面瓷砖表面耐磨损性的测定

This part of ISO 10545 specifies a method for determining the resistance to surface abrasion of all glazed ceramic tiles used for floor covering.

Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles

SANS 10107:1996 瓷砖的设计和安装

Deals with all work involved in the internal and external laying of ceramic wall and floor tiles and mosaics. Deals with the types and classes of backgrounds and substrates and their suitability to receive a bedded finish.

The design and installation of ceramic tiling

DIN 51094:1996 陶瓷砖.墙砖和地砖色牢度和耐光性试验

Ceramic tiles - Testing of the light fastness and colour fastness of ceramic tiles for walls and floors

DIN EN ISO 10545-11:1996 瓷砖.第11部分:上釉瓷砖抗碎裂测量

The document describes a method for the determination of crazing resistance for glazed tiles.

Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994); German version EN ISO 10545-11:1996

DIN EN ISO 10545-8:1996 瓷砖.第8部分:线性热膨胀测定

The document describes a method for the determination of the linear thermal expansion of ceramic tiles.

Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994); German version EN ISO 10545-8:1996