91.100.23 标准查询与下载

GSO ISO 17889-1:2024 陶瓷砖系统 陶瓷砖和安装材料的可持续性 第1部分：陶瓷砖规范

This document specifies sustainability requirements together with assessment methods and evaluation schemes for ceramic tiles. This document includes relevant criteria across product life cycle from raw material through manufacturing, use and end-of-life management.

Ceramic tiling systems — Sustainability for ceramic tiles and installation materials — Part 1: Specification for ceramic tiles

GSO ISO 10545-4:2023 瓷砖 第4部分：断裂模量和断裂强度的测定

This document specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength

GSO ISO 10545-15:2023 瓷砖 第15部分：瓷砖释放的铅和镉的测定

This document specifies a method for the determination of lead and cadmium given off by the ceramic tiles surface.

Ceramic tiles — Part 15: Determination of lead and cadmium given off by tiles

GSO ISO 10545-14:2023 瓷砖 第14部分：耐污渍性的测定

ISO 10545-14:2015 specifies a method for determining the resistance to stains of the proper surface of ceramic tiles.

Ceramic tiles — Part 14: Determination of resistance to stains

GSO ISO 10545-3:2023 瓷砖 第3部分：吸水率、表观孔隙率、表观相对密度和堆积密度的测定

ISO 10545-3:2018 specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product specifications.

Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density

GSO ISO 10545-10:2023 瓷砖 第10部分：吸湿膨胀的测定

This document specifies a method for determining the moisture expansion of ceramic tiles.

Ceramic tiles — Part 10: Determination of moisture expansion

GSO ISO 10545-2:2023 瓷砖 第2部分：尺寸和表面质量的测定

This document specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles. Tiles with areas less than 4 cm2 are excluded from measurements of length, width, straightness of sides, rectangularity and surface flatness. NOTE Spacer lugs and glaze blobs and other irregularities of the sides are intended to be ignored when measuring length, width, straightness of sides, rectangularity, if these are subsequently hidden in the joints after fixing (installation).

Ceramic tiles — Part 2: Determination of dimensions and surface quality

GSO ISO 10545-13:2023 瓷砖— 第13部分：耐化学性的测定

ISO 10545-13:2016 specifies a test method for determining the chemical resistance of ceramic tiles at room temperature. The method is applicable to all types of ceramic tiles.

Ceramic tiles — Part 13: Determination of chemical resistance

GSO ISO/TR 17870-2:2023 瓷砖 安装指南 第2部分：薄陶瓷墙砖、地砖和镶板的安装

ISO/TS 17870-2:2014 defines the quality of thin ceramic tiling and provides guidance for materials selection, installation, and use, to ensure that required levels of quality and performance are achieved. It considers all aspects related to the specification and installation of the tiling project, in terms of: manufacture and distribution of the materials (thin ceramic tiles and panels, adhesives, grouts, etc.); specification of the thin tiling; and installation of the tiling (thin tile fixing operations). It is applicable to internal and external thin ceramic floor and wall tiling, installed by adhesive methods.

Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels

GSO ISO/TR 17870-1:2023 瓷砖安装指南 第1部分：陶瓷墙地砖的安装

ISO/TR 17870-1:2015 defines the quality of ceramic tiling and provides guidance for materials selection, installation and use, to achieve required levels of quality and performance. It considers aspects related to the specification and installation of the tiling project, in terms of: - manufacture and distribution of the materials (ceramic tiles, adhesives, grouts, etc.); - specification of the tiling; - installation of the tiling (tile fixing operations). It is applicable to internal and external floor and wall ceramic tiling, installed by either cement mortar or other adhesive methods. NOTE The quality of ceramic tiling depends on the following general characteristics: - regularity; - durability; - safety. The durability of the tiling can depend on its use and management.

Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles

ISO/TS 17870-3:2023 瓷砖.安装.第3部分：用机械方法将大尺寸瓷砖和面板安装在支撑结构上

Ceramic tiles — Installation — Part 3: Installation of large format porcelain tiles and panels by mechanical means onto a supporting structure

BS EN ISO 10545-20:2022 瓷砖 测定瓷砖挠度以计算其曲率半径

1   Scope This document specifies a method for measuring the deflection of ceramic tiles for calculating their radius of curvature. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Determination of deflection of ceramic tiles for calculating their radius of curvature

EN ISO 10545-20:2022 瓷砖.第20部分:计算曲率半径用瓷砖挠度的测定

This document specifies a method for measuring the deflection of ceramic tiles for calculating their radius of curvature. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022)

BS EN ISO 10545-18:2022 瓷砖 光反射率值（LRV）的测定

1   Scope The objective of this document is to define a test method to determine the light reflectance value ( LRV ) of ceramic tiles, including mosaic tiles. It is applicable to solid-coloured, multicoloured and non-uniform shade tile surfaces including tile with flame effects, speckled or textured with different types of finishing.

Ceramic tiles - Determination of Light Reflectance Value (LRV)

EN ISO 10545-18:2022 瓷砖.第18部分:光反射值（LRV）的测定

The objective of this document is to define a test method to determine the light reflectance value (LRV) of ceramic tiles, including mosaic tiles. It is applicable to solid-coloured, multicoloured and non-uniform shade tile surfaces including tile with flame effects, speckled or textured with different types of finishing.

Ceramic tiles - Part 18: Determination of Light Reflectance Value (LRV) (ISO 10545-18:2022)

GSO ISO 10545-1:2021 瓷砖 第1部分：抽样和验收依据

ISO 10545-1:2014 specifies rules for batching, sampling, inspection, and acceptance/rejection of ceramic tiles.

Ceramic tiles — Part 1: Sampling and basis for acceptance

GSO ISO 13007-1:2021 瓷砖 灌浆和粘合剂 第1部分：粘合剂的术语、定义和规格

ISO 13007-1:2014 applies to ceramic tile adhesives for internal and external tile installations on walls and floors. ISO 13007-1:2014 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives ISO 13007-1:2014 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].

Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives

BS EN ISO 10545-4:2019 瓷砖 断裂模量和断裂强度的测定

What is ISO 10545-4 about?    ISO 10545-4 is the fourth part of the series of documents that specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles.   Who is ISO 10545-4 for?    ISO 10545-4 on modulus of rupture and breaking strength of ceramic tiles is relevant to:   Manufacturers and suppliers of ceramic tiles   Civil engineers   Product engineers 

Ceramic tiles. Determination of modulus of rupture and breaking strength

BS EN 17160:2019 瓷砖产品分类规则

What is BS EN 17160 - Product category rules for ceramic tiles about?   BS EN 17160 is the European standard on ceramic tiles that provides the core product category rules for all construction products and services.   BS EN 17160 defines Product Category Rules (PCR) providing guidelines and rules for developing a type III environmental declaration (EPD) for ceramic tiles produced by extrusion and dry-pressing techniques, mainly used for internal and/or external floorings and walls coverings and façade cladding.   BS EN 17160 :  

Product category rules for ceramic tiles

EN ISO 10545-4:2019 瓷砖.第4部分:断裂模数和破坏强度的测定

This document specifies a test method for determining the modulus of rupture and breaking strength of all ceramic tiles. NOTE ISO 13006 provides property requirements for tiles and other useful information on these products.

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)