共找到 3829 条与 混凝土和混凝土制品 相关的标准,共 256 页
顶管用聚合物混凝土管的术语和定义、管材分类、原材料、结构型式和连接方式、要求、试验方法、检验规则、标志、包装、运输、贮存和产品出厂证明书
Polymer concrete pipe ( Use for jacking method )
Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Quality management regulations for ready-mixed concrete
Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method
1 Scope This document describes the procedure for the determination of soluble sulfate salts which can be present in aggregates. The test is suitable for aggregates where the sulfate content derives directly from contact with, or immersion in, saline water, e.g. typical sea-dredged aggregates.
Aggregates for concrete. Test methods for chemical properties - Determination of soluble sulfate salts
This document describes the procedure for the determination of soluble sulfate salts which can be present in aggregates. The test is suitable for aggregates where the sulfate content derives directly from contact with, or immersion in, saline water, e.g. typical sea-dredged aggregates.
Aggregates for concrete — Test methods for chemical properties — Part 2: Determination of soluble sulfate salts
Concrete temperature suppression anti-cracking waterproofing agent
1.1 This specification covers solid, dry-cast, concrete facing brick and other solid concrete masonry facing units intended for interior and exterior use in constructing structural and facing masonry components and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. NOTE 1—Specification C55 addresses concrete building brick used in non-facing, utilitarian applications (previously referred to in earlier editions of Specification C55 as Grade S—for general use where moderate strength and resistance to frost action and moisture penetration are required). This specification differs from Specification C55 in that it includes expanded consideration for properties of concrete units used in facing applications and other exposures (previously referred to in earlier editions of Specification C55 as Grade N—for use as architectural veneer and facing units in exterior walls and for use where high strength and resistance to moisture penetration and severe frost action are desired). 1.2 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. NOTE 2—Concrete facing brick and other solid concrete masonry facing units covered by this specification are made from lightweight or normal weight aggregates, or both. NOTE 3—When particular features are desired, such as density classification, high compressive strength, surface textures for appearance or bond, finish, color, fire resistance, insulation, acoustical properties, or other special features, such properties should be specified separately by the purchaser. Suppliers should be consulted as to the availability of concrete facing brick and other concrete masonry facing units having the desired features. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
基本条件:相关手续、营业证书、场地要求、技术人员配备、生产工艺、品质控制、诚信管理、运营管理 生产能力:构件生产车间、构件堆场面积、砼生产线、起重设备、钢筋加工设备、养护设备、其它辅助设备、生产计量装置、设备管理 技术管理水平:管理体系、实验室、原材料管理、生产管理、生产记录与档案管理、构件质量管理、组织机构、员工培训、科技研发 安全文明生产:企业文化、安全文明生产 绿色生产: 厂区要求、绿色生产、设备设施 诚信建设:销售合同管理、售后服务、诚信经营、行业自律 信息化管理:生产中央控制室、数据管理、制造执行系统(MES)、办公智能化管理、公共信息平台、仓库管理系统(WMS) 预制构件质量检查: 预制构件工序检查、预制构件模具质量检验、预制构件钢筋半成品及预埋件质量检验、预制构件钢筋成品质量及隐蔽验收检验、预制构件混凝土浇筑记录、PC构件首件验收、预制构件成品质量检验记录、生产线构件生产过程巡检质量检查记录
Star rating standard for precast concrete component production enterprises in Zhuhai
1.1 This test method describes procedures for microscopical determinations of the air content of hardened concrete and of the specific surface, void frequency, spacing factor, and pasteair ratio of the air-void system in hardened concrete. Three procedures are described: 1.1.1 Procedure A—Linear-traverse method. 1.1.2 Procedure B—Modified point-count method. 1.1.3 Procedure C—Contrast enhanced method. 1.2 This test method is based on prescribed procedures that are applied to sawed and lapped sections of specimens of concrete from the field or laboratory. 1.3 It is intended to outline the principles of this test method and to establish standards for its adequate performance but not to describe in detail all the possible variations that might be used to accomplish the objectives of this test method. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Note 9 and Note 12. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
1 范围 本文件规定了环形混凝土电杆质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于环形混凝土电杆质量分级评价活动。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中,注日期的引用文件,仅该日期对应的版本适用于本文件;不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。 GB/T 4623—2014 环形混凝土电杆 T/CAS ES000000001—2022(V01) 工业品质量分级评价规则 通则
Rules for quality grading and evaluating of industrial products—Circular concrete pole
1 范围 2 规范性引用文件 3 术语和定义 4 基本规定 5 原材料 5.1 膨胀剂 5.2 水泥 5.3 骨料 5.4 矿物掺合料 5.5 外加剂 5.6 拌合用水 5.7 其它材料 6 混凝土性能 6.1 膨胀性能 6.2 防水抗渗性能 6.3 拌合物性能 6.4 长期性能和耐久性能 7 配合比 8 施工 8.1 原材料控制 8.2 计量 8.3 搅拌 8.4 运输 8.5 浇筑成型 8.6 养护 9 质量检验和验收 9.1 质量检验 9.2 检验评定 9.3 工程质量验收
Technical specification for application of micro-expansion waterproof concrete
Reinforced concrete manhole blocks for sewerage works
Test method for air content of fresh concrete by the volumetric method
Test method for soundness of aggregates by use of sodium sulfate
Expanded polystyrene lightweight concrete panel for wall
Standard practice for preparing concrete sample in the laboratory
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号