91.100.60 隔声和绝热材料 标准查询与下载
共找到 1714 条与 隔声和绝热材料 相关的标准，共 115 页
1 Scope This document specifies the equipment and procedures for determining the coefficient of linear thermal expansion at sub-ambient temperatures (−196 °C to 25 °C), subject to the possible temperature limitation of the test specimens. It is not applicable to products which experience dimensional changes during the test due to the loss of hydration water or which undergo other phase changes.
Thermal insulating products for industrial installations. Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
- ICS
- 91.100.60
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
1总则；2术语；3基本规定；4性能要求；5设计；6施工；7验收。
Technical standard for sound and thermal insulation engineering of floating build floor with water hardness cross-linking polythylene composite roll
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2024-04-30
- 实施
- 2024-06-01
ISO 4898:2018 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials. ISO 4898:2018 is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation. ISO 4898:2018 covers the following cellular materials used in the thermal insulation of buildings: - PF based on phenolic polymer; - EPS based on expanded polystyrene; - XPS based on extruded polystyrene; - PUR based on polyurethane. The limiting quality values in this document are for use only in the specification of materials between purchaser and supplier, and are not intended to be used for design purposes. Additional requirements for special applications can be added to those specified in this document by agreement between purchaser and supplier.
Rigid cellular plastics — Thermal insulation products for buildings — Specifications
- ICS
- 91.100.60
- CCS
- 发布
- 2024-04-25
- 实施
本标准的主要技术内容分为：总则、术语、系统及组成材料、设计、施工、质量验收。
Technical specification for application of thermal and sound insulation system on building floor based on the hard rock self-leveling
- ICS
- 91.100.60
- CCS
- C302
- 发布
- 2024-04-20
- 实施
- 2024-05-01
Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
- ICS
- 91.100.60
- CCS
- 发布
- 2024-04-15
- 实施
1.0.1 为在房屋建筑节能保温工程中规范使用KL无机中空玻璃微珠保温材料外墙内保温系统，提高建筑物的保温隔热性能，降低建筑采暖制冷运行能耗，确保工程质量，制定本标准。 1.0.2 本标准适用于新建、扩建、改建的一般工业和民用建筑节能工程以及既有建筑、城市更新外墙节能改造工程的设计、施工与验收。 1.0.3 KL无机中空玻璃微珠保温材料外墙内保温系统在建筑节能保温工程中的应用，除应执行本标准外，尚应符合现行国家标准的规定。
KL Inorganic Hollow Glass Bead Insulation Material Application Technical Standard for Exterior Wall Internal Insulation System
- ICS
- 91.100.60
- CCS
- E501
- 发布
- 2024-04-15
- 实施
- 2024-04-15
1.1 This practice covers criteria for establishing the acceptability of lots of shipments of preformed board, preformed block and pipe, and batts and blanket thermal insulation based on sampling and inspection. 1.2 This practice is intended for use in conjunction with appropriate ASTM material specifications that classify and describe the specific physical requirements for the product in terms of qualification requirements and inspection requirements. Determination of nonconformity shall be based on the tolerances for individual sample test values prescribed in the material specification. 1.3 This practice may require inspection substantially different from that performed in the normal course of production. If the purchaser requires sampling and acceptance inspection in accordance with this practice, he shall so specify in the order or contract. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
- ICS
- 91.100.60
- CCS
- 发布
- 2024-03-29
- 实施
本标准主要技术内容包括：1 总则；2 术语；3 性能要求；4 设计；5 施工；6 验收。
Acrylic composite sound insulation material Technical standards for engineering applications
- ICS
- 91.100.60
- CCS
- E4790
- 发布
- 2024-03-20
- 实施
- 2024-04-01
Standard Practice for Conditioning of Thermal Insulating Materials
- ICS
- 91.100.60
- CCS
- 发布
- 2024-03-01
- 实施
Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- ICS
- 91.100.60
- CCS
- 发布
- 2024-03-01
- 实施
Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
- ICS
- 91.100.60
- CCS
- 发布
- 2024-03-01
- 实施
Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
- ICS
- 91.100.60
- CCS
- 发布
- 2024-03-01
- 实施
Energy consumption limit per unit of magnesia refractory raw materials and products
- ICS
- 91.100.60
- CCS
- F 02
- 发布
- 2024-02-29
- 实施
- 2024-03-29
本图集所采用的保温材料——幕墙专用硬质玻璃棉板加复合防火贴面体系是一种由直径只有小于7微米的玻璃纤维丝制作而成的有弹性的成型体。其作为幕墙保温系统具有以下特点: 高憎水性能:幕墙专用玻璃棉的憎水率高达 99%以上，保证材料的保温性能。 保温隔热性能:幕墙专用玻璃棉纤维直径小、从而使导热系数更低，保温性能更优。 防火性能:玻璃棉本身是A级防火、复合防火贴面后可以达到 A2 级的性能指标。 施工安装性能:由于纤维细并且不含渣球、易于裁剪，大大提高安装效率，节省人工费用和缩短安装工期。 安装使用性能:幕墙专用硬质玻璃棉板的单位面积重量可控制，大大降低了保温结构的自重，提高了幕墙保温的制作、搬运、吊装、悬挂、使用等过程的效率和安全。 结构抗振性能:幕墙专用硬质玻璃棉板纤维细长，使得整体结构强度高，抗拉、抗震性能优、安装或长期使用都不易出现下垂、散落坍塌的现象。 声学性能:由于玻璃棉是大量的玻璃纤维相互缠绕、编织形成的制品，中间存在有大量的微孔隙，具有良好的吸声、降噪的功能。 化学性能:作为无机材料，幕墙专用硬质玻璃棉板不会出现腐烂、发霉等现象，也不会引起铁、铜或者铝的锈蚀，并且长期使用不收缩，翘曲或者塌陷，确保工程应用的长期性能。
Coated rigid glass wool board insulation structure for building curtain walls
- ICS
- 91.100.60
- CCS
- E4790
- 发布
- 2024-02-23
- 实施
- 2024-05-01
BS ISO 16685 Thermal insulating products for industrial installations -Mechanical properties testing at sub-ambient temperatures
- ICS
- 91.100.60
- CCS
- 发布
- 2024-02-06
- 实施
- 2024-02-06
1.1 本图集适用于天津市建筑高度不大于100m的新建、扩建和改建的工业及民用建筑工程。 1.2 本图集适用于抗震设防烈度为8度及8度以下地区的建筑。 1.3 本图集适用于墙体保温系统和屋面保温系统。 1.4 既有建筑节能改造可结合实际条件参照执行。
DK Youdun Building Insulation System Design Atlas
- ICS
- 91.100.60
- CCS
- C302
- 发布
- 2024-02-01
- 实施
- 2024-03-01
本文件规定了微孔陶吸隔声屏障板的规格、面密度和标记、技术要求、试验方法、检验规则、标志、标签、包装、运输和贮存。 本文件适用于建筑工程及道路交通用微孔陶吸隔声屏障板。
Microporous ceramic acoustic barrier panel
- ICS
- 91.100.60
- CCS
- C303
- 发布
- 2024-01-16
- 实施
- 2024-01-16
本文件规定了微孔陶吸隔声屏障板产品质量及企业标准水平评价的基本要求、评价指标及要求、评价方法及等级划分。 本文件适用于建筑工程及道路交通用微孔陶吸隔声屏障板产品质量及企业标准水平评价。相关机构开展质量分级和企业标准水平评价、“领跑者”产品评价以及相关认证或评价时可参照使用，相关企业在制定企业标准时也可参照本文件。
Assessment requirements for quality grading and forerunner— Microporous ceramic acoustic barrier panel
- ICS
- 91.100.60
- CCS
- C303
- 发布
- 2024-01-16
- 实施
- 2024-01-16
1、固废免烧多孔砌块作为一种新型绿色环保墙体材料，标准的编制首次对该材料的性能指标、检测方法提出相关规定，填补了固废免烧自保温多孔砌块的产品标准空白。 2、标准对固废免烧多孔砌块自保温墙体系统的组成体系、材料性能、检测方法及要求进行系统的规定，为固废免烧多孔砌块自保温墙体系统的推广与应用提供了标准依据。
Self-thermal insulation wall system material of non-fired perforated block made from solid waste
- ICS
- 91.100.60
- CCS
- E4790
- 发布
- 2024-01-04
- 实施
- 2024-03-01
Thermal insulation products. Vacuum insulation panels (VIPs). Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2023-12-31
- 实施
- 2023-12-31
