91.120.10 建筑物绝热 标准查询与下载

BS PAS 2038:2021 改造非住宅建筑以提高能源效率 规格

Retrofitting non-domestic buildings for improved energy efficiency. Specification

T/LESC 01-2022 钛瓷饰面涂装系统应用技术规程

1、总则    2、术语 3、基本规定    4、系统构造与材料组成           4.1  钛瓷饰面涂装系统         4.2  钛瓷涂层         4.3  其他组成材料   5、设计           5.1  一般规定         5.2  特殊部位细部构造要求          5.3  施工   6、施工         6.1  一般规定         6.2  基层及处理施工要点         6.3  钛瓷专用腻子施工要点         6.4  钛瓷面漆涂装施工要点         6.5  钛瓷罩光漆涂装施工要点         6.6  钛瓷涂层养护及清洁保护 7、验收         7.1  一般规定         7.2  基层验收要点         7.3  钛瓷专用腻子验收要点

Technical specification for titanium porcelain finish coating systems

T/SDCT 013-2021 HN复合外模板现浇混凝土保温系统应用技术规程

       以 HN 复合外模板为免拆外模板，常规模板为内模板，中间浇筑混凝土，并通过连接件将 HN 复合外模板与混凝土牢固连接在一起，外侧做保温浆料防火找平层、抗裂砂浆抹面层及饰面层形成的无空腔复合保温系统，简称 HN 复合外模板保温系统。        HN 复合外模板保温系统根据 HN 复合外模板类型的不同分为 HN - A 型外模板保温系统和 HN - B 型外模板保温系统。

Technical specification for application of HN composite external formwork cast-in-place concrete insulation system

PN-EN 16783-2017-06/Ap1-2021-08 E 绝热产品 用于准备环境产品声明的工厂制造和现场成型产品的产品类别规则（PCR）

Thermal insulation products -- Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations

DB37/T 5196-2021 建筑气密性能检测标准（风机气压法）

本标准适用于新建、改建、和扩建的民用建筑围护结构气密性能的测试。

Building airtight performance testing standard (fan air pressure method)

SN EN 15193-1+A1-2021 建筑物的能源性能 照明的能源要求 第1部分：规范，模块 M9

Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9

DB21/T 3470-2021 现浇聚氨酯发泡颗粒复合材料外墙外保温技术规程

Technical specifications for external thermal insulation of external walls of cast-in-place polyurethane foam particle composite materials

T/CSTM 00392-2021 LNG储罐用弹性毡回弹系数测定方法

本文件规定了LNG储罐用弹性毡回弹系数的测定方法。 本文件适用于对回弹系数有要求的LNG储罐用弹性毡制品。

Test method for resilience factor of resilient blanket for LNG storage tank

PN-EN ISO 52127-1-2021-07 E 建筑物的能源性能 建筑物管理系统 第1部分：模块 M10-12（ISO 52127-1:2021）

Energy performance of buildings -- Building management system -- Part 1: Module M10-12 (ISO 52127-1:2021)

PN-EN ISO 52000-1-2017-10 P 建筑物的能源性能 总体 EPB 评估 第1部分：一般框架和程序（ISO 52000-1:2017）

Energy performance of buildings -- Overarching EPB assessment -- Part 1: General framework and procedures (ISO 52000-1:2017)

GSO ISO 52016-1:2021 建筑物的能源性能 供暖和制冷、内部温度以及显热和潜热负荷的能源需求 第1部分：计算程序

ISO 52016-1:2017 specifies calculation methods for the assessment of: a) the (sensible) energy need for heating and cooling, based on hourly or monthly calculations; b) the latent energy need for (de-)humidification, based on hourly or monthly calculations; c) the internal temperature, based on hourly calculations; d) the sensible heating and cooling load, based on hourly calculations; e) the moisture and latent heat load for (de-)humidification, based on hourly calculations; f) the design sensible heating or cooling load and design latent heat load using an hourly calculation interval; g) the conditions of the supply air to provide the necessary humidification and dehumidification. The calculation methods can be used for residential or non-residential buildings, or a part of it, referred to as "the building" or the "assessed object". ISO 52016-1:2017 also contains specifications for the assessment of thermal zones in the building or in the part of a building. The calculations are performed per thermal zone. In the calculations, the thermal zones can be assumed to be thermally coupled or not. The calculation methods have been developed for the calculation of the basic energy loads and needs, without interaction with specific technical building systems, and for the calculation of the system specific energy loads and needs, including the interaction with specific systems. The hourly calculation procedures can also be used as basis for calculations with more extensive system control options. ISO 52016-1:2017 is applicable to buildings at the design stage, to new buildings after construction and to existing buildings in the use phase. NOTE Table 1 in the Introduction shows the relative position of ISO 52016-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures

GSO ISO 52000-1:2021 建筑物的能源绩效 总体 EPB 评估 第1部分：总体框架和程序

ISO 52000-1:2017 establishes a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. It takes into account the specific possibilities and limitations for the different applications, such as building design, new buildings 'as built', and existing buildings in the use phase as well as renovation. NOTE Table 1 in the Introduction shows the relative position of ISO 52000-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1:2017.

Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures

GSO ISO 18523-2:2021 建筑物的能源性能 能源计算的建筑物、区域和空间使用的时间表和条件 第2部分：住宅建筑

ISO 18523-2:2018 specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings. The schedule and conditions include schedules of occupancy, operation of technical building systems, ventilation rates, hot water usage, usage of appliances and internal heat gains due to occupancy, lighting and appliances. The schedule and conditions for lighting are applicable to fixed installed lighting fixtures. ISO 18523-2:2018 also gives categories of residential building, zone and space according to differentiating schedule and condition. For residential buildings or its housing units which contain any category of space or zone of non-residential buildings, ISO 18523‑1 applies. Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified. The values and categories for the schedule and condition are included informatively. NOTE The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest or smallest values are assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 2: Residential buildings

GSO ISO 52003-1:2021 建筑物能源性能指标、要求、评级和证书 第1部分：总体能源性能的一般方面和应用

The set of EPB assessment standards produces a great number of overall and partial EPB indicators as outputs. ISO 52003-1:2017 provides general insight to both private parties and public regulators (and all stakeholders involved in the regulatory process) on how to make good use of these outputs for different purposes (post-processing). ISO 52003-1:2017 describes the relation between the EPB indicators and the EPB requirements and EPB ratings, and it discusses the importance of project-specific, tailored values as requirement or reference for certain EPB indicators. ISO 52003-1:2017 also includes a couple of possible EPB labels and it lists the different steps to be taken when establishing an EPB certification scheme. ISO 52003-1:2017 provides standardized tables for reporting in a structured and transparent manner the choices that are to be made with respect to overall EPB requirements. The tables are non-restrictive, thus allowing for full regulatory flexibility. ISO 52003-1:2017 does not provide such tables for partial EPB requirements (related to the fabric or technical buildings systems), as this is dealt with in other documents. NOTE Table 1 in the Introduction shows the relative position of ISO 52003-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance

GSO ISO 18523-1:2021 建筑物的能源性能 能源计算的建筑物、区域和空间使用的时间表和条件 第1部分：非住宅建筑

ISO 18523-1:2016 specifies the formats to present schedule and condition of building, zone and space usage, which is to be referred to as input data of energy calculations for non-residential buildings. The schedule and condition include schedules of occupancy, operation of technical building systems, ventilation rate, hot water usage and internal heat gains due to occupancy, lighting and equipment. ISO 18523-1:2016 also gives categories of building, zone and space according to differentiating schedule and condition. Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified. The values and categories for the schedule and condition are given in annexes for more information for the application when the users of this document do not have detailed information on the values and categories for the schedule and condition. The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest values are to be assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 1: Non-residential buildings

GSO ISO 52022-1:2021 建筑物的能源性能 建筑构件和构件的热、太阳和日光特性 第1部分：结合玻璃的遮阳装置的太阳和日光特性的简化计算方法

ISO 52022-1:2017 specifies a simplified method based on thermal, solar and light characteristics of the glazing and solar and light characteristics of the solar protection device, to estimate the total solar energy transmittance, direct energy transmittance and the light transmittance of a solar protection device combined to a glazing.

Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing

GSO ISO 6781-3:2021 建筑物性能 用红外方法检测建筑物内的热、空气和湿度不规则性 第3部分：设备操作员、数据分析师和报告撰写者的资格

ISO 6781-3:2015 specifies the qualifications and competence requirements for personnel who (i) perform thermographic investigations on buildings, (ii) interpret the data emanating from thermographic investigations, and (iii) report the results of thermographic investigations. ISO 6781-3:2015 provides the basis for a statement of conformity, in three classes, of the knowledge, skills and abilities of individuals to perform thermographic measurements, analysis and reporting of results for small buildings, residential buildings, and commercial and institutional buildings. ISO 6781-3:2015 is not applicable to specialized equipment or other specific situations.

Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of equipment operators, data analysts and report writers

GSO ISO 9869-2:2021 隔热 建筑构件 热阻和热传导率现场测量 第2部分：框架结构住宅红外法

This document describes the infrared method for measuring the thermal resistance and thermal transmittance of opaque building elements on existing buildings when observing high emissivity diffuse surface using an infrared (IR) camera. This document demonstrates a screening test by quantitative evaluation to identify the thermal performance defect area of building elements. This document aims to measure the thermal transmittance (U-value) of a frame structure dwelling with light thermal mass, typically with a daily thermal capacity calculated according to ISO 13786 below 30 kJ/(m2K).

Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 2: Infrared method for frame structure dwelling

DS/EN 15193-1:2021 建筑物的能源性能 照明的能源要求 第1部分：规范，模块 M9

Energy performance of buildings – Energy requirements for lighting – Part 1: Specifications, Module M9

BS PAS 2035/2030:2019 改造住宅以提高能源效率 规范和指南

Retrofitting dwellings for improved energy efficiency. Specification and guidance