91.140 建筑物中的设施 标准查询与下载

GSO 1429:2002 陶瓷卫生洁具 坐浴盆

  Scope is not provided for this standard

Ceramic sanitary appliances - bidets

GSO 1604:2002 安装空调通风系统的安全要求 第2部分：空调通风采暖系统的特殊要求

This standard shall apply to all systems for the movement of environmental air in structures

safety requirements for the installation of air conditioning and ventilating systems–part ii: requirements of hvac systems

GSO 1617:2002 空调通风系统安装安全要求 第3部分：气流组织要求

This standard shall apply to all systems for the movement of environmental air in structures

Safety requirements for the instaldation of air conditioning and ventilating systems - Part 3 Requirements of air distribution.

GSO 1589:2002 空调风管 第1部分：定义、分类和术语

This standard is concerned with air duct classification, definitions and terminology for normal air conditioning

Air ducts for air conditions-part1: definitions,classification and terminology .

GSO 1121:2002 由硬质聚氨酯泡沫制成的隔热板

This Gulf standard is concerned with rigid polyurethane foam thermal insulating boards, faced or laminated with flexible or rigid materials such as asphalt paper, cardboard, plastic, gypsum, metal and fiberglass intended for use in building applications. It is also concerned with boards manufactured from blocks - with or without surface skins - used for transport containers, refrigerator cabinets and cold stores.

RIGID POLYURETHANE FOAM BOARDS FOR THERMAL INSULATION .

GSO 1603:2002 空调通风系统安装安全要求 第1部分：定义和技术术语

This standard shall apply to all systems for the movement of environmental air in structures

Safety requirements for the installation of air conditioning and ventilating systems-part1:definitions and technical terms.

GSO 1122:2002 硬质聚氨酯泡沫保温板试验方法

This Gulf standard is concerned with the methods of test for rigid polyurethane foam boards for thermal insulating. It covers both laminated boards with flexible or rigid materials, not less than 20 mm thick, intended for use in building applications, and flat or profiled boards, with or without natural skins, intended for use for transport containers, refrigerator cabinets and cold stores.

METHODS OF TEST FOR RIGID POLYURETHANE FOAM BOARDS FOR THERMAL INSULATION

JG 3-2002 采暖散热器 灰铸铁型散热器

本标准规定了灰铸铁柱型散热器的型式、尺寸与性能参数、要求、试验方法、检验规则、标志、包装、运输与贮存等。 本标准适用于工业、民用建筑中以热水、蒸汽为热媒的灰铸铁柱型散热器。 热媒为热水时，温度不大于130℃，灰铸铁材质不低于HT100，工作压力为0.5MPa；温度不大于150℃，灰铸铁材质不低于HT150，工作压力为0.8MPa。热媒为蒸汽时，工作压力为0.2MPa。

Heating radiator--Cast iron column-type radiator

JG 4-2002 采暖散热器 灰铸铁翼形散热器

Heating radiator--Cast iron wing-type radiator

CECS 121-2001 城镇供热管网维修技术规程

本规程适用于城市供热管网和能力站的维护、检修及事故抢修。 本规程热管网的工作多数限定为： 1 工作压力P不大于1.6MPa（表压），介质温度t不大于350℃的蒸汽供热管网。 2 工作压力P不大于2.5MPa（表压），介质温度t不大于200℃的热水供热管网。

Specification of maintain technique for city heating pipelines

CECS 108-2000 公共浴室给水排水设计规程

本规程适用于新建、扩建和改建的城镇营业性公共浴室和工矿企业、机关、学校等团体公共浴室的给水排水设计。在设计下列浴室时，还应符合国家现行的有关规范或规程： 1 工厂车间浴室； 2 医院病房浴室； 3 游泳池浴室。

Specification for design of water supply and drainge in public bathroom

DB42/ 170.1-1999 建筑与建筑群智能化系统工程验收规范 第一部分：综合布线系统工程验收规范

本标准规定了综合布线系统工程的验收条件、验收内容和要求、验收方法及验收结论判收结论判定。本标准适用于四对非屏蔽/屏蔽对绞电缆水平布线、大对数非屏蔽/屏蔽对绞电缆大楼垂直布线，以及光缆水平布线、大楼垂直布鞋线和建筑群主干布线系统工程质量及传输性能验收。本标准同样适用于同轴电缆传输系统工程质量及传输性能验收。

Code for Acceptance of Intelligent System Engineering of Buildings and Groups of Buildings Part 1: Code for Acceptance of Integrated Wiring System Engineering

CP 13-1999 建筑物中机械通风和空调系统的规范

This code of practice provides general guidance in the design, construction, installation, testing and commissioning, maintenance and operation of mechanical ventilation and air-conditioning systems. It does not confer immunity from statutory requirements in government by-laws nor from relevant regulations of government departments. This code does not apply to industrial ventilation in control of air contaminants inside work place. NOTE - The installation of mechanical ventilation and air-conditioning systems may effect fire risks; it is therefore necessary for the architect or the responsible engineer to obtain the approval of the building authority to the proposed scheme. It is desirable that the architect should indicate any special risk before the design engineer proceeds. 2 The majority of mechanical ventilation and air-conditioning systems in Singapore do not require any form of heating and hence heating installations are not covered in this code. 3 The purpose of this code of practice is to establish the minimum requirements in mechanical ventilation and air-conditioning engineering practice such that an acceptable indoor thermal environment can be attained in an energy conserving way with due consideration of indoor air quality, fire safety, and maintainability of the equipment. NOTE - It is not intended that this code should impose unnecessary restrictions on design and installations of systems, nor on the development and use of new improved or unusual materials, design or methods of constructions or installation not covered by this code. However, in the event that this code is applied as a requirement by regulations of regulatory authorities, any departure from this code will require the specific approval of the regulatory authority.

Code of Practice for Mechanical ventilation and air-conditioning in buildings

BOCA CHAPTER 29 NBC-1999 水管系统

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Plumbing Systems

JG/T 3047-1998 采暖散热器.灰铸铁柱翼型散热器

本标准规定了灰铸铁柱翼型散热器的型式、尺寸与性能参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于工业、民用建筑中以热水、蒸汽为热媒的灰铸铁柱翼型散热器。 热媒为热水时，温度低于130℃，灰铸铁材质不低于HT100，工作压力为0.5MPa;温度低于150℃，材质不低于HT150，工作压力为0.8 MPa。热媒为蒸汽时，工作压力为0.2MPa。

Heating radiator.Cast iron column-wing-type radiator

JG/T 3012.2-1998 采暖散热器.钢制翅片管对流散热器

本标准规定了钢制翅片管对流散热器的型式、尺寸与性能参数、技术要求、试验方法、检测规则、标志、包装、运输和贮存等。 本标准适用于工业、民用建筑中以热水和蒸汽为热媒的对流器。对流器的工作压力:热水热媒为1.0 MPa；蒸汽热媒为0.3MPa。

Heating radiator.Steel finned-tube convector

BOCA CHAPTER 29 NBC-1996 水管系统

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Plumbing Systems

GSO 169:1994 家用燃气加热器 第1部分：便携式辐射加热器

This standard is concerned with gas-fired domestic radiant type portable heaters, incorporating a space for a gas cylinder, for use with liquefied petroleum gases.

GAS-FIRED DOMESTIC HEATERS PART 1: RADIANT PORTABLE HEATERS

JG/T 3012.1-1994 采暖散热器.钢制闭式串片散热器

Radiator.Steel convector with fin-and-tube

CB/T 3615-1994 钢管涂塑质量要求

Steel pipe plastic coating quality requirements