93.080.10 道路建筑 标准查询与下载
共找到 347 条与 道路建筑 相关的标准，共 24 页
本标准规定了路面处理机械的安全要求。本标准适用于下列路面处理机械:--沥青洒布机(又称沥青喷洒机);--石屑撒布机;--路面修复机械(即沥青喷洒石屑撒布机,又称沥青碎石同步封层机,以下简称喷洒撒布机);--沥青砂胶搅拌机;--灌缝机;--微表处/稀浆封层机。路面处理机械可安装在运输车辆、挂车或铰接式卡车上组合形成一个完整的设备。路面处理机械也可安装在其专用底盘结构和行走驱动装置(自行式或步行控制式)上。在所有的情况下,机器和底盘都形成了一个完整的设备。适用于运输卡车底盘方面的规章和标准,与本标准中称为“运输车辆”的设备相关,即使其为了应用于路面处理而做了特别修改。其在公共道路交通中的使用由相关国家法规管理。本标准涉及通过风险评估确定的路面处理机械预定使用和在制造商可预见的条件下使用时的所有重大危险(见第4章)。本标准不涉及与压力容器、噪声和电磁兼容(EMC)相关的重大危险。本标准规定了消除或减小与机器运转、设置、调整、卸载和日常维护相关的重大危险所引起风险的适当技术措施。本标准不包含对运输车辆或特殊结构的要求。这些要求包含在与运输车辆制造有关的规章中。本标准不涉及振动,因为对于此类型的所有机械,振动不是由于较低的工作速度和特定工作条件(如平坦表面)所引起的相关危险。本标准不涉及与在潜在爆炸性环境中操作机器相关的风险。本标准不包括与道路运输危险物品相关的要求。
Road construction and road maintenance machinery and equipment.Road surface treatment machines.Safety requirements
- ICS
- 93.080.10
- CCS
- P97
- 发布
- 2014-06-09
- 实施
- 2015-01-01
Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ICS
- 93.080.10
- CCS
- 发布
- 2024-05-01
- 实施
ISO 8608:2016 specifies a uniform method of reporting measured vertical road profile data for either one-track or multiple-track measurements. It applies to the reporting of measured vertical profile data taken on roads, streets and highways, and on off-road terrain. It does not apply to rail-track data. Measurement and processing equipment and methods are not included.
Mechanical vibration — Road surface profiles — Reporting of measured data
- ICS
- 93.080.10
- CCS
- 发布
- 2024-04-25
- 实施
Technical requirements for road-related projects on national and provincial highways
- ICS
- 93.080.10
- CCS
- P 66
- 发布
- 2024-04-09
- 实施
- 2024-05-10
Requirements for the preparation of technical evaluation reports for road-related projects on national and provincial highways
- ICS
- 93.080.10
- CCS
- P 66
- 发布
- 2024-04-09
- 实施
- 2024-05-10
Technical specifications for anchoring of articulated prefabricated frame beams
- ICS
- 93.080.10
- CCS
- P66
- 发布
- 2024-03-26
- 实施
- 2024-05-26
Drainage and noise reduction asphalt pavement maintenance technology
- ICS
- 93.080.10
- CCS
- P66
- 发布
- 2024-03-26
- 实施
- 2024-05-26
Smart Highway Construction Guide
- ICS
- 93.080.10
- CCS
- P 66
- 发布
- 2023-12-18
- 实施
- 2024-01-18
本文件规定了集中养护作业模式一般规定、前期调查、交通组织方案、施工组织方案、工程实施、项目后评价等内容。
Operation guide for centralized maintenance of expressway
- ICS
- 93.080.10
- CCS
- E481
- 发布
- 2023-12-07
- 实施
- 2023-12-31
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)
- ICS
- 93.080.10
- CCS
- 发布
- 2023-12-01
- 实施
本文件规定了公路土质路堑高边坡施工监测的基本规定、监测方案编制、监测等级、监测项目、监测点布置、监测方法及精度要求、自动化实时监测系统要求、监测频率、监测预警和监测成果。
Technical regulations for construction monitoring of highway soil cuts and high slopes
- ICS
- 93.080.10
- CCS
- E481
- 发布
- 2023-11-01
- 实施
- 2023-12-01
本文件主要内容包括公路绿色工区设计的术语和定义、符号及代号、绿色建筑设计与施工、能源与照明系统、暖通系统、新型雨水收集系统、污水与固废管理、生态型排（透）水道路与公路绿色工区评价。
Technical specifications for highway green work area design
- ICS
- 93.080.10
- CCS
- P66
- 发布
- 2023-08-04
- 实施
- 2023-08-07
本文件规定了公路工程用煤矸石集料路面基层的煤矸石集料、其他原材料、混合料组成设计、施工、质量检验与控制。 本文件适用于煤矸石路面基层材料在各等级公路基层与底基层中的应用，市政道路可参照执行。
Technical Guidelines for Application of Coal Gangue Aggregate in Pavement Base
- ICS
- 93.080.10
- CCS
- N772
- 发布
- 2023-08-02
- 实施
- 2023-08-02
Standard Specification for Preformed Sponge Rubber, Cork, and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
- ICS
- 93.080.10
- CCS
- 发布
- 2023-07-01
- 实施
Technical regulations for construction solid waste landfill
- ICS
- 93.080.10
- CCS
- P66
- 发布
- 2023-06-09
- 实施
- 2023-07-09
Road operation machinery and associated equipment — Road surface cleaning machines —Terminology and commercial specifications
- ICS
- 93.080.10
- CCS
- 发布
- 2023-06
- 实施
Technical specifications for design and construction of geogrid reinforced soil subgrade
- ICS
- 93.080.10
- CCS
- P 66
- 发布
- 2023-05-16
- 实施
- 2023-07-16
This document establishes the terminology, functions, types and characteristics of road milling machinery. It is applicable to the planing of pavements made of concrete, asphalt and similar materials with a view to removing them.
Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications
- ICS
- 93.080.10
- CCS
- 发布
- 2023-05-03
- 实施
ISO 15688:2012 establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. ISO 15688:2012 does not apply to soil stabilizers used in agricultural applications.
Road construction and maintenance equipment — Soil stabilizers — Terminology and commercial specifications
- ICS
- 93.080.10
- CCS
- 发布
- 2023-05-03
- 实施
Technical specification for surface penetration protection of concrete structures in road engineering
- ICS
- 93.080.10
- CCS
- P25
- 发布
- 2023-03-30
- 实施
- 2023-07-01
