93.080.40 街道照明和有关设备 标准查询与下载

LST EN 13201-4-2004 道路照明 第4部分：测量照明性能的方法

Road lighting - Part 4: Methods of measuring lighting performance

LST EN 13201-2-2004 道路照明 第2部分：性能要求

Road lighting - Part 2: Performance requirements

DS/EN 13201-2:2004 道路照明 第2部分：性能要求

This part of this European Standard defines, according to photometric requirements, lighting classes for road lighting aiming at the visual needs of road users, and it considers environmental aspects of road lighting.

Road lighting - Part 2: Performance requirements

NF X90-006-4:2004 道路照明.第4部分:测量照明性能的方法

Road lighting - Part 4 : methods of measuring lighting performance.

DIN EN 13201-2:2004 路灯.第2部分:性能要求

This part of this European Standard defines lighting classes for road lighting aiming at the visual needs of road users, and it considers environmental aspects of road lighting. Installed intensity classes for the restriction of disability glare and control of obtrusive light and installed glare rating classes for the restriction of discomfort glare are also defined.#,,#

Road lighting - Part 2: Performance requirements; German version EN 13201-2:2003

DIN EN 13201-3:2004 路灯.第3部分:性能的计算

Road lighting - Part 3: Calculation of performance; German version EN 13201-3:2003

DIN EN 13201-4:2004 路灯.第4部分:测量照明性能的方法

This part of this European Standard describes the procedures for making photometric and related measurements for road lighting installations. Examples are given for the form of the test report.

Road lighting - Part 4: Methods of measuring lighting performance; German version EN 13201-4:2003

DS/EN 13201-4:2004 道路照明 第4部分：测量照明性能的方法

This part of this European Standard specifies the procedures for making photometric and related measurements of road lighting installations. Examples are given of the form of the test report.

Road lighting - Part 4: Methods of measuring lighting performance

DS/EN 13201-3:2004 道路照明 第3部分：性能计算

This European Standard defines and describes the conventions and mathematical procedures to be adopted in calculating the photometric performance of road lighting installations designed in accordance with EN 13201-2.

Road lighting - Part 3: Calculation of performance

ANSI C136.9-2004 道路照明.金属头中使用的灯座支撑组件的机械互换性

This standard covers dimensional, maintenance, and light distribution features that permit the interchange of enclosed, post top-mounted luminaires whose center of mass is approximately over the mounting tenon.

Roadway Lighting – Socket Support Assemblies for Use in Metal Heads, Mechanical Interchangeability

IEEE Std C136.21-2004 道路照明 与柱顶安装灯具一起使用的垂直榫

Covers the attachment features of vertical tenons on pole tops or brackets used in roadway and area lighting that permit the interchangeability of post-top-mounted luminaires.

Roadway Lighting - Vertical Tenons Used with Post-Top-Mounted Luminaires

ANSI C136.13-2004 道路照明.木制电杆用金属支架

Covers metal pipe, tubing, and structural brackets for wood poles designed to support luminaires of generally speherical, ellipsoidal, or rectangular shapes used in roadway and area lighting.

Roadway Lighting - Metal Brackets for Wood Poles

ANSI C136.22-2004 道路和地区照明设备.灯具的内标签

Covers internal luminaire identification labels for all styles of luminaires used for roadway or area lighting applications.

For Roadway and Area Lighting Equipment - Internal Labeling of Luminaires

ANSI C136.21-2004 柱顶安装式照明设备用立式榫头

Covers the attachment features of vertical tenons on pole tops or brackets used in roadway and area lighting that permit the interchangeability of post-top-mounted luminaires.

Vertical Tenons Used with Post Top-mounted Luminaires

EN 40-2:2004 灯柱.第2部分:一般要求和尺寸

This document specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns.This Part does not attempt to restrict the actual appearance or shape of the column or bracket. The majority of lighting columns are normally of a stepped tubular, round, octagonal or polygonal crosssection.Lighting columns may be manufactured from materials other than those listed in the foreword (e.g. wood, plastic, cast iron) or in other forms (e.g. lattice and te

Lighting columns - Part 2: General requirements and dimensions

ANSI C136.2-2004 灯具的电压分级

This standard covers three voltage classifications for luminaires used in roadway and area lighting, and also covers general testing methods to determine dielectric and transient voltage withstands.

Luminaire Voltage Classification

ANSI C136.14-2004 水平发光高密度放电灯用椭圆型封闭式侧装照明设备

Covers dimensional, maintenance, and light distribution features that permit the interchange of enclosed side-mounted luminaires for horizontal-burning high-intensity discharge lamps used in roadway and area lighting equipment.

Elliptically Shaped, Enclosed Side-mounted Luminaires For Horizontal-burning High-intensity Discharge Lamps

ANSI C136.34-2004 防暴盾牌

This standard covers supplementary vandal resistant shields used to protect luminaires and luminaire accessories used for roadway and area lighting applications.

Vandal Resistant Shields

BS PD 6547:2004 BS EN 40-3-1和BS EN 40-3-3使用指南

This Published Document gives guidance and background information to specifiers and manufacturers of lighting columns on the use of BS EN 40-3-1 and BS EN 40-3-3, which specify the design of lighting columns. In particular, it gives guidance on the information which the specifier is required to give to the manufacturer to allow a suitable lighting column to be designed, such as the topography factor, site wind speed, site altitude and terrain category, which are used to determine the design wind pressure.

Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3

BS 5489-2:2003+A1:2008 道路照明设计用实施规则.遂道照明

Code of practice for the design of road lighting - Lighting of tunnels