97.040.10 厨房家具 标准查询与下载

BS 6222-2:1997 家用厨房设备.第2部分:拼装式厨房设备结构性能要求和试验方法规范

This Part of BS 6222 specifies structural performance requirements and methods of test for fitted kitchen units and does not specify safety requirements which are contained in BS EN 1153. The requirements apply to all materials and to all types of construction. The carcase handling test given in annex A applies to unloaded units tested in the condition in which they are expected to be received on site, and therefore excludes self-assembly units. This Part of BS 6222 does not specify requirements for assemblies of units forming peninsular units, island units or breakfast bars, which are specified in BS 6222 : Part 5, or requirements for free-standing units, which are specified in BS 4875 : Part 5 and BS 4875 : Part 7. The tests do not take account of the effects of ageing or chemical degradation.

Domestic kitchen equipment - Specification for structural performance requirements and methods of test for fitted kitchen units

DIN 18865-9:1997 大型厨房设备.食品配送设备.第9部分:标准型和卫生型橱房设备内部要求

The document comprises the spezifications of construction and test for equipment-insides in basic and hygiene version. It applies to food distribution equipments for commercial use.

Equipment for commercial kitchens - Food distribution equipment - Part 9: Equipment-insides in basic and hygiene version

BS EN 1153:1996 厨房家具.内装式和单立式厨柜和工作台的安全性要求和检验方法.

This European Standard specifies safety requirements on the structure of built-in and free-standing kitchen units, work tops and breakfast bars including those with glass in their construction. It applies to units after installation. This standard does not apply to catering equipment. However, safety, depending on the structure of the building, is not included, e.g. the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and the wall attachment are not included. This standard specifies requirements to prevent serious injury through normal functional use, as well as misuse that might reasonably be expected to occur. It should be understood that the tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. Assessment of ageing, degradation and the heating effect of appliances are not included nor are the ergonomic aspects of safety and resistance to fire.

Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops

AS/NZS 4387.10:1996 家用厨房的组装．测试方法．抽屉的大力打开测定

Domestic kitchen assemblies - Methods of test - Determination of slam open of drawers

AS/NZS 4387.14:1996 家用厨房的组装．测试方法．把手强度的测定

Domestic kitchen assemblies - Methods of test - Determination of strength of handles

AS/NZS 4387.0:1996 家用厨房的组装．测试方法．介绍，方法清单和一般要求

Domestic kitchen assemblies - Methods of test - Introduction, list of methods and general requirements

AS/NZS 4387.9:1996 家用厨房的组装．测试方法．抽屉和其他和滑板支撑物的耐向下静载荷的测定

Domestic kitchen assemblies - Methods of test - Determination of resistance to downward static load on drawers and other runner-supported items

AS/NZS 4387.1:1996 家用厨房的组装．测试方法．构架和底托架强度的测定

Domestic kitchen assemblies - Methods of test - Determination of strength of carcass and underframe

AS/NZS 4387.5:1996 家用厨房的组装．测试方法．铰链门强度的测定

Domestic kitchen assemblies - Methods of test - Determination of strength of hinged doors

AS/NZS 4387.13:1996 家用厨房的组装．测试方法．抽屉，滑动层板和滑板疲劳度的测定

Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of drawers, sliding shelves and runners

AS/NZS 4387.7:1996 家用厨房的组装．测试方法．铰链门大力关闭的测定

Domestic kitchen assemblies - Methods of test - Determination of slam shut of hinged doors

AS/NZS 4387.2:1996 家用厨房的组装．测试方法．层板偏斜度的测定

Domestic kitchen assemblies - Methods of test - Determination of shelf deflection

AS/NZS 4387.8:1996 家用厨房的组装．测试方法．铰链门疲劳度的测定

Domestic kitchen assemblies - Methods of test - Determination of wear and fatigue of hinged doors

AS/NZS 4387.6:1996 家用厨房的组装．测试方法．铰链门大力打开的测定

Domestic kitchen assemblies - Methods of test - Determination of slam open of hinged doors

AS/NZS 4387.11:1996 家用厨房的组装．测试方法．抽屉的关闭打开测定

Domestic kitchen assemblies - Methods of test - Determination of slam shut of drawers

AS/NZS 4387.3:1996 家用厨房的组装．测试方法．层板托架强度的测定

Domestic kitchen assemblies - Methods of test - Determination of strength of shelf supports

AS/NZS 4387.4:1996 家用厨房的组装．测试方法．橱柜操作面和底面强度的测定

Domestic kitchen assemblies - Methods of test - Determination of the strength of worktops and bottom surfaces

AS/NZS 4387.12:1996 家用厨房的组装．测试方法．抽屉底表面保持度的测定

Domestic kitchen assemblies - Methods of test - Determination of retention of the bottom surface of drawers

AS/NZS 4386.1:1996 家用厨房的组装．厨房组合单元

Specifies the minimum requirements for the construction, durability, safety, ergonomics, strength, coordination of services and choice of components of fitted kitchen assemblies for use in domestic applications. This Standard is also applicable to small offices, holiday apartments, units and similar non-commercial applications. It is designed for use by manufacturers, builders, consumers, specifiers and regulatory authorities.

Domestic kitchen assemblies - Kitchen units

AS/NZS 4386.2:1996 家用厨房的组装．安装

Specifies the minimum requirements for the installation of fitted kitchen assemblies for use in domestic applications, whether delivered in pre-assembled or in flat-pack form. This Standard is also applicable to small offices, holiday apartments, units and similar non-commercial applications. It is designed for use by installers, manufacturers, builders, consumers, specifiers and regulatory authorities alike.

Domestic kitchen assemblies - Installation