97.100.20 气体加热器 标准查询与下载

LST EN 15033-2007 用于车船用液化石油气生产卫生热水的室内密封储水式热水器

Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats

BS EN 15033:2006 车辆和船舶使用液化石油气(LPG)产生的卫生间热水用室内密封蓄水加热器

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for:  vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12);  caravan holiday homes;  agricultural, forestry and mobile machinery, and  boats; hereafter called "appliance". This standard applies to appliances:  type C1, C3 and C5 (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof;  fitted with atmospheric burners;  appliances fitted with or without a fan on the combustion circuit;  using LPG at the pressure I3BP(30) indicated in EN 437, (for caravan holiday homes and boats see Annex A);  of nominal heat input not exceeding 7 kW (Hi);  appliances whether connected to the water mains pressure or on board water supply;  appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional 230 V heating element). This standard does not contain all the necessary requirements for:  appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use. This standard covers type testing only.

Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats

BS EN 15033:2007 车辆和船舶使用液化石油气（LPG）产生的卫生间热水用室内密封蓄水加热器

Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats

DIN EN 14438:2007 多个房间嵌入式燃气加热装置

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. This European Standard is intended to be used in conjunction with EN 613:2000. This European Standard is applicable to type Buss insets burning gas: — that incorporate an atmospheric burner; — that are installed directly to an open flue or to a device to evacuate the products of combustion; — that have a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect. * This European Standard is not applicable to: — open fronted appliances as specified in EN 13278; — decorative fuel effect appliances as specified in EN 509; — convection heating appliances as specified in EN 613; — catalytic combustion appliances; — appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266; — warm air heaters (which are subject of CEN/TC 180). This European Standard is only applicable to insets which are intended to be type tested.

Gas-fired insets for heating more than one room; English version of DIN EN 14438:2007-03

DIN EN 15033:2007 车辆和船舶用液化石油气生产卫生热水储水加热器封闭室

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for: — vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12); — caravan holiday homes; — agricultural, forestry and mobile machinery, and — boats; hereafter called "appliance". This standard applies to appliances: « — type Ci, €3 and Cs (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof; — fitted with atmospheric burners; — appliances fitted with or without a fan on the combustion circuit; — using LPG at the pressure ^BPOO) indicated in EN 437, (for caravan holiday homes and boats see Annex A); — of nominal heat input not exceeding 7 kW (//,); — appliances whether connected to the water mains pressure or on board water supply; — appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional 230 V heating element). This standard does not contain all the necessary requirements for: — appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use. This standard covers type testing only.

Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats; English version of DIN EN 15033:2007-02

BS EN 14438:2006 多个房间内置燃气加热装置

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. This European Standard is intended to be used in conjunction with EN 613:2000. This European Standard is applicable to type B11BS insets burning gas:  that incorporate an atmospheric burner;  that are installed directly to an open flue or to a device to evacuate the products of combustion;  that have a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect. This European Standard is not applicable to:  open fronted appliances as specified in EN 13278;  decorative fuel effect appliances as specified in EN 509;  convection heating appliances as specified in EN 613;  catalytic combustion appliances;  appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266;  warm air heaters (which are subject of CEN/TC 180). This European Standard is only applicable to insets which are intended to be type tested.

Gas-fired insets for heating more than one room

BS EN 14438:2007 多个房间内置燃气加热装置

Gas-fired insets for heating more than one room

ANSI Z83.26-2007 燃气红外线露天加热器的标准(类似于CSA 2.37)

Patio heaters for heating residential or nonresidential outdoor spaces. Outdoor heaters may be suspended overhead, angle mounted overhead, wall mounted, or floor mounted. Floor mounted heaters may be free-standing or portable. Outdoor heaters may be conn

Standard for Gas-Fired Infrared Patio Heaters (same as CSA 2.37)

ANSI/AWS C4.3/C4.3M:2007 安全含氧燃料气体加热喷灯操作的推荐实施规程

The new revised manual for oxyfuel gas cutting includes the latest procedures to be used in conjunction with oxyfuel gas cutting equipment. The manual also includes the latest safety recommendations. Complete lists of equipment are available from individual manufacturers.

Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation

ANSI Z21.88a-2007 开通风孔的气体壁炉加热器

Test and examination criteria for vented gas fireplace heaters for use with natural and liquefied petroleum (propane) gases, which allows the view of flames and provides the simulation of a solid fuel fireplace and furnishes warm air to the space in whic

Vented Gas Fireplace Heaters (same as CSA 2.33)

EN 14438:2006 供暖多个房间的燃气内嵌件

This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of gas-fired insets for heating more than one room that are intended to be built into a casing made from brickwork or similar material. This European Standard is intended to be used in conjunction with EN 613:2000. This European Standard is applicable to type B11BS insets burning gas:  that incorporate an atmospheric burner;  that are installed directly to an open flue or to a device to evacuate the products of combustion;  that have a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this European Standard is also applicable to insets for heating more than one room which have a live fuel effect. This European Standard is not applicable to:  open fronted appliances as specified in EN 13278;  decorative fuel effect appliances as specified in EN 509;  convection heating appliances as specified in EN 613;  catalytic combustion appliances;  appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266;  warm air heaters (which are subject of CEN/TC 180). This European Standard is only applicable to insets which are intended to be type tested.

Gas-fired insets for heating more than one room

DIN EN 419-2:2006 非家用燃气高架发光辐射加热器. 第2部分: 能源的合理使用; 英文版本DIN EN 419-2: 2006-12

This European Standard specifies the requirements and test methods for the rational use of energy of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, incorporating an atmospheric burner system referred to in the body of the text as "appliances". This European Standard is applicable to Type Ai appliances only (see 4.3). This European Standard is not applicable to: a) appliances designed for use in domestic dwellings; b) outdoor appliances; c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas); d) appliances having fully pre-mixed gas and air burners in which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone. e) appliances in which the supply of combustion air and/or the removal of the products o1 combustion is achieved by integral mechanical means. This standard is applicable to appliances which are intended to be type tested. Requirements foi applianceswhich are not intended to be type tested would need to be subject to further consideration.

Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy; English version of DIN EN 419-2:2006-12

JIS B 8627-1:2006 燃气发动机驱动的加热泵空调.第1部分:一般要求

この規格は，室内の快適な空気調和を目的として，都市ガス又は液化石油ガスを燃料とするガスエンジン（以下，エンジンという。)によって，蒸気圧縮冷凍サイクルの圧縮機を駆動し，かつ暖房時にエンジン排熱を回収利用するヒートポンブ式の冷暖房機(以下，ガスヒートポンプという。)であって定格冷房能力が85 kW以下のものについて規定する。

Gas engine driven heat pump air conditioners -- Part 1: General requirements

DIN EN 416-2:2006 非家用单个燃烧器燃气架空辐射管状加热器.第2部分:能源合理利用

This European Standard specifies the requirements and test methods for the rational use of energy of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'. This standard is applicable to Type A, A, B, B, B, B, B, B, B, B, C, C, C and C appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided. This standard is not applicable to: a) appliances designed for use in a domestic dwelling; b) outdoor appliances; c) appliances of heat input in excess of 120kW (based on the net calorific value of the appropriate reference test gas); d) appliances having fully pre-mixed gas and air burners in which : 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone. This standard is applicable to appliances which are intended to be type tested. Requirements for appliances which are not intended to be type tested need to be subject to further consideration.

Single-burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy; English version of DIN EN 416-2:2006-10

DS/EN 416-2:2006 非家用单燃烧器燃气架空辐射管加热器 第2部分：能源的合理使用

This European Standard specifies the requirements and test methods for the rational use of energy of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as ""appliances"".This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, B53, C12, C13, C32 and C33 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evaluation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided.This standad is not

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy

LST EN 416-2-2006 非家用单燃烧器燃气架空辐射管加热器 第2部分：能源的合理使用

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy

LST EN 419-2-2006 非家用燃气架空发光辐射加热器 第2部分：能源的合理使用

Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy

NF E31-402-2:2006 非家用单一燃烧器燃气式顶置辐射管加热器.第2部分:能源的合理使用

Single burner gas-fired overhead radiant tube heatersfor non-domestic use - Part 2 : rational use of energy.

NF E31-401-2:2006 非家庭用燃气高架发光辐射加热器.第2部分:能量的合理利用

Non-domestic gas-fired overhead luminous radiant heaters - Part 2 : rational use of energy.

DS/EN 419-2:2006 非家用燃气架空发光辐射加热器 第2部分：能源的合理使用

This European Standard specifies the requirements and test methods for the rational use of energy of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, incorporating an atmospheric burner system referred to in the body of the text as ""applicances"".This European Standard is applicable to Type A, applicable only (see 4.3).This European Standard is not applicable to:a) appliances designed for use in domestic dwellings:b) outdoor appliances;c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas);d) appliances having fully pre-mixed gas and air burners in which:1) eith

Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy