97.195 艺术和手工艺品 标准查询与下载

ASTM D6801-07(2021) 艺术品和其他材料最大自发加热温度测量的标准试验方法

1.1 This test method covers a small-scale laboratory procedure to determine the self heating tendency of oil-based materials by exposure to elevated temperatures in air in a controlled semi-adiabatic system. 1.2 This test method has been developed to address an urgent need to identify oil-based materials that may require labeling for spontaneous heating tendency. Studies based on this test method may allow the development of a practice to identify such oil-based materials. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For safety concerns specific to disposal of solvent-soaked rags, see Appendix X1. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

ASTM D4236-94(2021) 慢性健康危害用艺术材料标签的标准实施规程

1.1 This practice describes a procedure for developing precautionary labels for art materials and provides hazard and precautionary statements based upon knowledge that exists in the scientific and medical communities. This practice concerns those chronic health hazards known to be associated with a product or product component(s), when the component(s) is present in a physical form, volume, or concentration that in the opinion of a toxicologist (see 2.1.11) has the potential to produce a chronic adverse health effect(s). 1.2 This practice applies exclusively to art materials packaged in sizes intended for individual users of any age or those participating in a small group. 1.3 Labeling determinations shall consider reasonable foreseeable use or misuse. The responsibility for precautionary labeling rests with the producer or repackager who markets the materials for art or craft use. 1.4 This practice does not specify test methods for determining whether a substance or product presents chronic health hazards. 1.5 This practice does not apply to products appropriately labeled for known chronic health hazards in accordance with chemical substance labeling standards and practices, such as another national consensus standard, existing labeling statutes, regulations, or guidelines. 1.6 Since knowledge about chronic health hazards is incomplete and warnings cannot cover all uses of any product, it is not possible for precautionary labeling to ensure completely safe use of an art product. 1.7 Manufacturers or repackagers may wish to determine individually or collectively precautionary labeling for art materials in accordance with this practice. Compliance may be certified by a certifying organization. Guidelines for a certifying organization are given in Appendix X1. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This practice is under the jurisdiction of ASTM Committee D01 on Paint and Related Coatings, Materials, and Applications and is the direct responsibility of Subcommittee D01.57 on Artist Paints and Related Materials. Current edition approved Nov. 1, 2021. Published November 2021. Originally approved in 1983. Last previous edition approved in 2016 as D4236 – 94 (2016). DOI: 10.1520/D4236-94R21. 2 ASTM Practice D4236 has been codified into U.S. law as part of the Federal Hazardous Substances Act, 15 USC S1277. Users of this standard should be familiar with the law and its regulations. Under this law and its regulations (16 CFR 1500), manufacturers must submit to the CPSC (Washington DC 20207) written criteria used by the toxicologist to recommend labeling. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 8QLYHUVLW\RI7RURQWR 8QLYHUVLW\RI7RURQWR SXUVXDQWWR/LFHQVH$JUHHPHQW1RIXUWKHUUHSURGXFWLRQVDXWKRUL]HG 'RZQORDGHGSULQWHGE\ &RS\ULJKWE\$670,QW O DOOULJKWVUHVHUYHG 7XH'HF*07 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Labeling Art Materials for Chronic Health Hazards

LST EN 17543-2021 文化遗产保护 建筑遗产的饰面 调查和记录

Conservation of Cultural Heritage - Finishes of built heritage - Investigation and documentation

T/XYZL 01-2021 信宜南玉雕刻工艺流程

1　雕刻工艺表现手法 2　雏型雕刻基本手法 3　雕刻手法 4　.制作流程 5　配座 　　 6　包装

Xinyi Nanyu Carving Process

DIN EN 17543:2021 文化遗产保护 建筑遗产的饰面 调查和记录；德文版 EN 17543:2021

This European standard defines best practice for collecting data and processing findings when investigating decorative and protective finishes on built heritage, thereby helping to establish original and subsequent decorative schemes. It applies to buildings [this term is still d

Conservation of Cultural Heritage - Finishes of built heritage - Investigation and documentation; German version EN 17543:2021

UNI EN 17543-2021 文化遗产保护 建筑遗产的饰面 调查和记录

Conservation of Cultural Heritage - Finishes of built heritage - Investigation and documentation

T/LMMX 001-2021 木制用品

本文件规定了木制用品的原辅材料、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Wooden products

LST EN 17488-2021 文化遗产保护 文化遗产中使用的多孔无机材料清洁方法选择分析评估程序

Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage

DS/EN 17543:2021 文化遗产的保护 建筑遗产的完成 调查和记录

Conservation of Cultural Heritage – Finishes of built heritage – Investigation and documentation

T/ZZB 2521-2021 家居画饰 布质油画

本文件规定了家居画饰布质油画（以下简称“油画”）的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于家居装饰用的布质油画。

Home decorative painting－Fabric oil painting

T/ZZB 2420-2021 手工塑料钻艺术画

本文件规定了手工塑料钻艺术画的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于手工塑料钻艺术画。

Handcrafted plastic rhinestone art picture

DIN EN 17488:2021 文化遗产保护 用于文化遗产中使用的多孔无机材料清洁方法选择分析评估程序；德文版 EN 17488:2021

This document gives the methodology for testing to evaluate both effectiveness and potential risk of a cleaning method as applied to porous inorganic materials such as natural or artificial stone included those with painting layers as finishes, using on site instrumental analyses

Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage; German version EN 17488:2021

SN EN 17543-2021 文化遗产保护 建筑遗产的饰面 调查和记录

Conservation of Cultural Heritage - Finishes of built heritage - Investigation and documentation

UNI EN 17488-2021 文化遗产保护 文化遗产中使用的多孔无机材料清洁方法选择分析评估程序

Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage

T/ZZB 2267-2021 草席

本文件规定了草席的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以天然草、仿草单独制成或以天然草、仿草为主要原料，配以织物材料编织而成的草席。

Straw mat

BS EN 17543:2021 文化遗产保护 建筑遗产的饰面 调查和文件

Conservation of Cultural Heritage. Finishes of built heritage. Investigation and documentation

T/WHTHYJ 001-2021 芜湖铁画分类分级指南

1　范围 本文件规定了芜湖铁画的术语和定义、分类、分级等内容。 本文件适用于指导芜湖铁画的分类分级。 2　规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 DB34/T 3251 芜湖铁画锻制技术规程 3　术语和定义 下列术语和定义适用于本文件。 芜湖铁画 Wuhu iron painting  以铁为主要原料，以国画为主要范本，运用独特技艺手工锻制的立体画面。 3.2 工艺品 arts and crafts 手工或半手工制作可批量生产的芜湖铁画（3.1）。 艺术品 artwork 运用锻制技艺手工制作的具有高度艺术价值的芜湖铁画。（3.1）。 馆藏品 collection 艺术品（3.3）中锻制技法精湛，意境、格调上乘且适合收藏的芜湖铁画（3.1）。 4　分类 芜湖铁画品种众多，根据不同的属性可以将芜湖铁画归为不同的类别。一般可按照作品主题或作品规格划分。 按照作品主题可以将芜湖铁画分为以下六类： ——山水铁画：以山川、河流等自然景物为主题的画面； ——花鸟铁画：以花卉、鸟类为主题的画面； ——人物铁画：以人物为主题的画面； ——书法铁画：以书法为主题的画面； ——动物铁画：以动物（不含鸟类）为主题的画面； ——其他铁画：除上述以外的事物为主题的画面。 按照作品规格可以将芜湖铁画分为以下五类： ——特型铁画：作品长度在500cm及以上； ——大型铁画：作品长度在（200～500）cm； ——中型铁画：作品长度在(50～200)cm； ——小型铁画：作品长度在50cm以下。 注：作品长度是指铁画作品的尺寸，方形取最大边长，圆形取直径长度，扇形取最大长度。 5　分级 分级种类 按芜湖铁画锻制技艺和艺术价值，可以将铁画等级分为工艺品、艺术品和馆藏品。 分级规则 表1中界定了芜湖铁画的分级规则。 表1　芜湖铁画分级规则 分级指标　分级种类 　工艺品　艺术品　馆藏品 画稿设计　画面内容反映时代风貌 　画面效果一般　画面效果优美　画面效果优美 画面内容具有唯一性、原创性 锻制技艺　手工或半手工制作　按照DB34/T 3251的规定手工锻制　按照DB34/T 3251的规定手工锻制 　整体画面用料强弱不合理　整体画面用料强弱合理　整体画面用料强弱合理 　点、线笔画转折不准确　点、线笔画转折准确　点、线笔画转折精准，有笔意 　层次高低穿插不合理，体现不出空间美、立体美　层次高低穿插合理，基本能体现出空间美、立体美　层次高低穿插合理，能体现出空间美、立体美 　块面锻叠不到位，结构不合理、不丰富　块面锻叠到位，结构基本合理、丰富　块面锻叠到位，结构合理、丰富 　锤痕、锤迹不明显，没有体现材质美　锤痕、锤迹运用恰当，基本能体现材质美　锤痕、锤迹运用恰当，能体现材质美 　个人锻制艺术风格特征不显著　个人锻制艺术风格特征显著　个人锻制艺术风格特征显著 　整体制作没有体现出国画神韵　整体制作基本能体现国画神韵　整体制作能体现国画神韵 　画面中没有创新技法　画面中含有合理的创新技法　画面中含有合理的创新技法 　制作难度较小　制作难度较大　制作难度大 后期装裱　喷漆厚薄均匀 画面布局构图与设计画稿基本吻合 题款、印章安装符合书画简则制度 装裱用料搭配合理 　画面着色不美观，没有起到提升艺术效果的作用　画面着色较为美观，起到提升艺术效果的作用　画面着色优美，起到提升艺术效果的作用 　整体装裱、外观、衬堂与画面比例基本协调，色彩搭配和谐美观性差　整体装裱、外观、衬堂与画面比例协调，色彩搭配基本和谐美观　整体装裱、外观、衬堂与画面比例协调，色彩搭配和谐美观 　无作者署名印章　有作者署名印章　有作者署名印章

Guidelines for classification of Wuhu iron painting

OENORM EN 17488-2021 文化遗产保护 文化遗产中使用的多孔无机材料清洁方法选择分析评估程序

Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage

EN 17543:2021 文化遗产保护 建筑遗产的饰面 调查和记录

Conservation of Cultural Heritage - Finishes of built heritage - Investigation and documentation

SN EN 17488-2021 文化遗产保护 文化遗产中使用的多孔无机材料清洁方法选择分析评估程序

Conservation of cultural heritage - Procedure for the analytical evaluation to select cleaning methods for porous inorganic materials used in cultural heritage