97.200.40 游乐场 标准查询与下载

GB 18158-2000 转马类 游艺机通用技术条件

本标准规定了转马类游艺机技术要求、试验方法及检验规则。 本标准适用于绕垂直轴旋转的转马及运动形式类似的游艺机。

Specifcations of amusement rides merry go round category

GB 18170-2000 电池车类 游艺机通用技术条件

本标准规定了电池车类游艺机技术要求、试验方法及检验规则。 本标准适用于以蓄电池为电源的电动机驱动的电池车及运动形式类似的游艺机（以下简称电池车）。

Specifications of amusement rides battery car category

GB 18169-2000 碰碰车类 游艺机通用技术条件

本标准规定了碰碰车类游艺机通用技术要求。 本标准适用于电力、内燃机及人力驱动的碰碰车类游艺机（以下简称碰碰车）。

Specifications of amusement rides bumter car category

GB 18167-2000 光电打靶类 游艺机通用技术条件

本标准规定了光电打靶类游艺机技术要求、试验方法及检验规则。 本标准适用于有信号、音响、灯光、数字显示与机械动作相互配合的及其形式类似的游艺机，如：打田鼠、守门将、算得快、光电打靶等。

Specifications of amusement rides shooting category

GB 18166-2000 架空游览车类 游艺机通用技术条件

本标准规定了架空游览车类游艺机技术要求、试验方法及检验规则。 本标准适用于人力、内燃机和电力驱动的沿架空轨道运行的游览车及运动形式类似的游艺机（以下简称架空车）。

Specifications of amusement rides monorail category

GB 18165-2000 小火车类 游艺机通用技术条件

本标准规定了小火车类游艺机技术要求、试验方法及检验规则。 本标准适用于电力、内燃机及其他动力驱动的沿地面轨道运行的小火车及运动形式类似的游艺机（以下简称小火车）。

Specifications of amusement rides fairy train category

GB 18164-2000 观览车类 游艺机通用技术条件

本标准规定了观览车类游艺机技术要求、试验方法及检验规则。 本标准适用于乘人部分水平轴转动观览车及运动形式类似的游艺机（以下简称观览车）。

Specifications of amusement rides wonder wheel category

ASTM F2479-24b 现浇游乐场表面铺设规范、采购、安装和维护的标准指南

Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing

ASTM F2479-24a 现浇游乐场表面铺设规范、采购、安装和维护的标准指南

Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing

ASTM F2376-24 水滑梯系统的分类、设计、制造、施工和操作的标准实施规程

Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems

T/CASEI 037.1-2024 电梯检验和试验指南 第1部分：乘客和载货电梯

本文件给出了从事电梯监督检验和定期检验的特种设备检验机构开展乘客和载货电梯监督检验和定期检验的指南。电梯的自行检测可参照本文件。本文件适用于曳引驱动乘客电梯、曳引驱动载货电梯、强制驱动载货电梯、液压乘客电梯、液压载货电梯、消防员电梯和防爆电梯（不含防爆杂物电梯）。本文件不适用于非公共场所安装且仅供单一家庭使用的电梯。

Guidelines for the inspection and testing of lifts—Part 1:Passenger and goods passenger lifts

T/CASEI 037.2-2024 电梯检验和试验指南 第2部分：自动扶梯和自动人行道

本文件给出了从事电梯监督检验和定期检验的特种设备检验机构开展自动扶梯与自动人行道监督检验和定期检验的指南。自动扶梯与自动人行道的自行检测可参照本文件。本文件适用于自动扶梯、自动人行道。本文件不适用于非公共场所安装且仅供单一家庭使用的自动扶梯、自动人行道。

Guidelines for the inspection and testing of lifts—Part 2:Escalators and moving walks

T/CASEI 037.3-2024 电梯检验和试验指南 第3部分：杂物电梯

本文件给出了从事电梯监督检验和定期检验的特种设备检验机构开展杂物电梯的监督检验和定期检验的指南。杂物电梯的自行检测可参照本文件。本文件适用于曳引驱动杂物电梯、强制驱动杂物电梯和液压驱动杂物电梯（包含防爆杂物电梯）。本文件不适用于非公共场所安装且仅供单一家庭使用的杂物电梯。

Guidelines for the inspection and testing of lifts—Part 3 : Service lifts

ASTM F2479-24 现浇操场铺面的规范、采购、安装和维护的标准指南

1.1  This guide covers information with regard to the design, manufacture, installation, and maintenance of poured-in-place playground surfaces. Note 1:  This document is a guide and not intended to be used as a specification; it should be used for educational purposes. 1.2  This guide outlines the issues of compliance with existing standards, durability, and functional longevity. 1.3  This guide reviews issues such as edge treatment, abutting surfaces, and combinations with other surfaces designed for circulation or protective surfaces. 1.4  This guide presents maintenance considerations and general procedures that should be followed by the owner/operator. 1.5  This guide outlines aging considerations such as loss of impact absorption, cracking, shrinkage, heaving, and how to prevent, accommodate, or rectify those issues. 1.6  This guide presents warranty considerations. 1.7  This guide does not imply that an injury cannot be incurred when the surface system is compliant with the standards referred to in this guide. 1.8  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing

BS EN 1177:2018+A1:2023 缓冲冲击的操场表面 测定冲击衰减的试验方法

Impact attenuating playground surfacing. Methods of test for determination of impact attenuation

GSO ISO 17842-2:2024 游乐设施和游乐设施的安全 第2部分：操作和使用

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement rides and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations, and is concerned with the installing, assembly and disassembly, operating, handling, maintaining, repairing, modifying and inspecting of amusement devices, and is addressed to controllers, operators, attendants and inspection bodies. The following are not covered by this document (this list is not exhaustive): —    grandstands; —    construction site installations; —    scaffolding; —    removable agricultural structures; —    simple coin-operated children's amusement devices; —    carrying up to three children, and recreational devices like waterslides or summer toboggan runs; —    playground equipment; —    rope courses; —    climbing walls; —    inflatable trampolines and swimming pool equipment.

Safety of amusement rides and amusement devices — Part 2: Operation and use

GSO ASTM F1148:2024 家庭游乐场设备的标准消费者安全性能规范

  Scope is not provided for this standard

Standard Consumer Safety Performance Specification for Home Playground Equipment

T/HEBSEA 16-2023 观光车和观光列车司机操作规程

（1）标准中“4　基本要求”，对使用单位、司机、车辆、作业条件、安全要求等内容明确了基本要求。 （2）标准中“5　作业程序及要求”，明确了车辆检查、车辆操作、车辆存放、车辆加油和充电等检查和操作要领。 （3）规程中“6　应急处置”，明确了应急处置的一般要求和转移抛锚车辆、排险控险、医疗救护等应急处置的安全要点。

Operating procedures for sightseeing car and sightseeing train drivers

T/HEBSEA 12-2023 旋转类大型游乐设施操作规程

1.标准中“4　基本要求”，明确了使用单位和人员的得要求。 2.标准中“5　作业程序及要求”，指出了旋转类大型游乐设施运行前的检查要求及项目，试运行、运行中、停止运行后的操作要求及需要填写的运行操作记录参考表。 3.标准中“6　应急处置与救援”，提出旋转类大型游乐设施在操作时发生故障或事故时的处置方法及要求。

Operating procedures for rotating large-scale amusement facilities

ASTM F355-23 体育、娱乐和游戏用运动表面系统、其他防护运动系统和材料的冲击衰减的标准试验方法

Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play