97.220.20 标准查询与下载

TY/T 3904.1-2023 滑雪运动场地器材使用要求和检验方法　第1部分：压雪机

Requirements and inspection methods for the use of skiing venue equipment—Part 1:Snow groomer

KS G ISO 14573-2023 软靴用滑雪板绑带要求和试验方法

Snowboard strap bindings for soft boots — Requirements and test methods

BS ISO 11088:2023 高山滑雪板/固定器/靴子(SBB)系统 组装、调整和检查

1   Scope This document specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating, in a practical way, the requirements of International Standards which are related to skis, bindings and boots. It is applicable to a ski-binding-boot system (S-B-B) for alpine skiing, of which at least one component is owned by the user. This document is applicable for complete and incomplete alpine ski-binding-boot systems which are owned by the user or rented for 15 days or more. NOTE ISO 13993 gives a method of measurement for equipment which is rented for less than 15 days.

Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection

ISO 11088:2023 高山滑板联结接滑脚系统的装配,调整和检验

This document specifies assembly, adjustment and inspection procedures for the binding mechanisms of skis, integrating, in a practical way, the requirements of International Standards which are related to skis, bindings and boots. It is applicable to a ski-binding-boot system (S-B-B) for alpine skiing, of which at least one component is owned by the user. This document is applicable for complete and incomplete alpine ski-binding-boot systems which are owned by the user or rented for 15 days or more. NOTE ISO 13993 gives a method of measurement for equipment which is rented for less than 15 days.

Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection

BS ISO 9462:2023 高山滑雪固定器 要求及测试方法

1   Scope This document specifies the main characteristics of ski-bindings and describes, as an example, test methods A and B. This document applies to ski-bindings for alpine skiing for children, juniors and adults.

Alpine ski-bindings. Requirements and test methods

BS ISO 9838:2023 高山和旅游滑雪固定器 用于滑雪板绑定测试的测试鞋底

1   Scope This document defines test soles representing — an alpine ski-boot (form A) or at least the bottom part of it used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465, and — a touring ski-boot (form T) or at least the bottom part of it used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465. This document also defines a test body representing alpine ski-boots with improved walking soles in accordance with ISO 23223. NOTE Ski-boots have their own International Standards (ISO 5355, ISO 9523 and ISO 23223), which allow relatively large tolerances in defining the test sole that are generally believed to be suitable for on-slope use by skiers, but too large for reproducible laboratory measurements.

Alpine and touring ski-bindings. Test soles for ski-binding tests

ISO 9838:2023 高山雪橇紧固 雪橇紧固试验用试验底板

This document defines test soles representing — an alpine ski-boot (form A) or at least the bottom part of it used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465, and — a touring ski-boot (form T) or at least the bottom part of it used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465. This document also defines a test body representing alpine ski-boots with improved walking soles in accordance with ISO 23223. NOTE Ski-boots have their own International Standards (ISO 5355, ISO 9523 and ISO 23223), which allow relatively large tolerances in defining the test sole that are generally believed to be suitable for on-slope use by skiers, but too large for reproducible laboratory measurements.

Alpine and touring ski-bindings — Test soles for ski-binding tests

ISO 9462:2023 高山雪橇固定装置.要求和试验方法

This document specifies the main characteristics of ski-bindings and describes, as an example, test methods A and B. This document applies to ski-bindings for alpine skiing for children, juniors and adults.

Alpine ski-bindings — Requirements and test methods

DB23/T 3358-2022 冰雪装备标准体系构建规范

Specifications for the construction of ice and snow equipment standard system

DB23/T 3352-2022 拼接式可移动真冰场质量要求

Quality requirements for spliced movable real ice rink

ASTM F1063-22 高山滑雪板/靴/绑带件的功能检验和调试

1.1 This practice provides procedures for inspection and adjustment of alpine ski/binding/boot systems, including ski binding systems designated as multi-norm bindings and those compatible with “improved walking soles.” 1.2 This practice should be followed for all ski/binding/boot systems, whether newly mounted or previously mounted, when work is performed on the system that may affect its release function, unless otherwise specified by the binding manufacturer in non-rental applications. 1.3 This standard is not applicable to ski/binding/boot rental systems, including incomplete systems, except when a customer intends to use his or her own skis/bindings with the shop’s boots (as provided in Subsection 7.3 of Practice F1064). For more information on ski/binding/boot rental shop practices, for both complete and incomplete systems, consult Practice F1064. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

ASTM F504-05(2022) 测量高山滑雪板固定装置准静态释放力矩的标准试验方法

1.1 This test method covers a procedure for the measurement of release moments of ski bindings under conditions where inertia loadings of the ski binding system are not significant. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

T/CSGF 017-2022 户外运动用品分类

本文件确立了户外运动用品的分类。 本文件适用于为户外运动设计、制造的产品。

Classification of outdoor sporting goods

22/30447008 DC BS ISO 9523 成人旅行滑雪靴 与旅游滑雪固定器的接口 要求及测试方法

BS ISO 9523. Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods

T/CNHB 0003-2021 手球运动场地与设施

本文件规定了手球运动中所使用的场地、球门等设施的术语和定义、分类、要求及试验方法。 本文件适用于新建、改建和扩建的训练、教学、健身和竞赛用手球场地的建设。

Handball field and equipment

T/CSGF 015-2021 手球运动场地与设施

本文件规定了手球运动中所使用的场地、球门等设施的术语和定义、分类、要求及试验方法。 本文件适用于新建、改建和扩建的训练、教学、健身和竞赛用手球场地的建设。

Handball field and equipment

T/CSGF 013-2021 蹦床场所配置要求

本文件规定了蹦床场所的术语和定义、管理制度、人员要求、场所要求、标志、符号和安全警示说明、健身者须知。 本文件适用于以体育健身为目的开展蹦床运动的场所。

Trampoline site configuration requirements

T/CSGF 011-2021 棒球

本标准规定了棒球的范围、规范性引用文件、术语和定义、分类、要求、试验方法、检验规则、标识、包装、运输和贮存和棒球等级对应年龄与赛制推荐表。 本文件适用于3岁以上年龄段棒球运动使用的棒球。

Baseball

T/CSGF 012-2021 棒球棒

本标准规定了棒球的范围、规范性引用文件、术语和定义、分类、要求、试验方法、检验规则、标识、包装、运输和贮存。对棒球棒长重对照和棒球棒弹性系数做了资料性附录。

Baseball bat

ASTM F1064-21 租赁应用中完整和不完整高山滑雪板/捆绑/靴系统的取样和检验的标准实施规程

1.1 This practice establishes a uniform method for the sampling and inspection of complete and incomplete Alpine ski/binding/boot systems used in rental operations. This practice is appropriate for use in rental applications in which all or part of the functional components of the system are supplied by the rental facility. 1.2 This practice should be followed by any facility that rents complete or incomplete Alpine ski/binding/boot systems to an end user. 1.3 This practice is not intended for use with other ski boot or bindings systems, such as alpine touring or pin/tech systems. Use of ski boots or ski bindings that do not meet the requirements for alpine ski equipment can cause unexpected release and retention characteristics. 1.4 This standard does not apply to a ski/binding/boot system that is rented to one individual for the majority of a season and not returned to the rental inventory until the end of the season (often referred to as a seasonal rental); such systems will follow the practice provided in Practice F1063. NOTE 1—Refer to Practice F1063 for equivalent procedures and tolerances for retail systems. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications