97.220.20 标准查询与下载

ASTM F1061-08(2020) 滑雪板捆绑试验装置的标准规范

1.1 This specification covers requirements for devices used to determine the release moments of ski equipment in retail sales and rental facilities. 1.2 This specification is applicable to the manufacture, repair, and calibration of such devices. 1.3 This specification is to be used with Test Method F1062. 1.4 The values expressed in newton metres, newtons, and centimetres are to be regarded as the standard. 1.5 The values expressed in units of torque may be converted to the appropriate force values when devices that indicate force are used. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Ski Binding Test Devices

KS G ISO 8783:2019 高山滑雪板斜坡性能试验指南

Alpine skis－Guidelines for conducting slope performance tests

KS G ISO 7138:2019 越野滑雪 - 衡量平衡点的质量和位置

Cross-country skis — Determination of mass and location of balance point

KS G ISO 13993-2019 滑雪租赁店完整和不完整高山滑雪捆绑靴系统的抽样和检验

Ski rental shop — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems

KS G ISO 6005:2019 高山滑雪板滑雪板固定螺钉试验方法

Alpine skis－Ski binding screws－Test methods

KS G ISO 8783-2019 高山滑雪板斜坡性能试验指南

Alpine skis－Guidelines for conducting slope performance tests

KS G ISO 7138-2019 越野滑雪 - 衡量平衡点的质量和位置

Cross-country skis — Determination of mass and location of balance point

KS G ISO 6003:2019 高山滑雪板质量和极惯性矩的测定实验室测量方法

Alpine skis－Determination of mass and polar moment of inertia－Laboratory measurement method

KS G ISO 11497-2019 Telemark滑雪和绑定 - 绑定安装区域 - 要求和测试方法

Telemark skis and bindings — Binding mounting area — Requirements and test methods

KS G ISO 13993:2019 滑雪租赁店完整和不完整高山滑雪捆绑靴系统的抽样和检验

Ski rental shop — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems

KS G ISO 10045:2019 高山滑雪板捆绑安装区试验螺钉要求

Alpine-country skis－Binding mounting area－Requirements for test screws

KS G ISO 8061:2019 阿尔卑斯山滑雪板固定装置释放扭矩值的选择

Alpine ski-bindings－Selection of release torque values

KS G ISO 5355:2019 高山滑雪靴 - 安全要求和测试方法

Alpine ski-boots — Safety requirements and test methods

KS G ISO 11497:2019 Telemark滑雪和绑定 - 绑定安装区域 - 要求和测试方法

Telemark skis and bindings — Binding mounting area — Requirements and test methods

KS G ISO 6003-2019 高山滑雪板质量和极惯性矩的测定实验室测量方法

Alpine skis－Determination of mass and polar moment of inertia－Laboratory measurement method

KS G ISO 5355-2019 高山滑雪靴 - 安全要求和测试方法

Alpine ski-boots — Safety requirements and test methods

KS G ISO 7798-2019 越野滑雪板疲劳指标的测定循环载荷试验

Cross-country skis－Determination of fatigue indexes－Cyclic loading test

KS G ISO 7140-2019 越野滑雪板动态性能的测定实验室测量方法

Cross－country skis－Determination of dynamic performance－Laboratory measurement method

KS G ISO 6005-2019 高山滑雪板滑雪板固定螺钉试验方法

Alpine skis－Ski binding screws－Test methods

KS G ISO 8061-2019 阿尔卑斯山滑雪板固定装置释放扭矩值的选择

Alpine ski-bindings－Selection of release torque values