97.220.20 标准查询与下载

KS G ISO 14359-2019 冬季运动器材 高分子材料零件的标记

Winter-sports equipment－Marking of parts made of polymer materials

ASTM F498-19 高山滑雪板中心弹簧常数和弹簧常数平衡的标准试验方法

1.1 This test method covers the determination of center spring constant, forebody spring constant, and afterbody spring constant of Alpine skis. In addition, it covers a method for determination of the spring constant balance. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis

ASTM F3030-13(2019) 具有通道安装系统和可拆卸插入件的滑雪板的标准测试方法

1.1 This test method covers the requirements and test method for snowboards with channel-mounting systems on which bindings are attached to the board by means of a removable insert and screws. 1.2 This test method does not apply to snowboards for children with a mass less than 25 kg. It contains data for the manufacturer of snowboards, bindings, and retention devices concerning dimensions, tests, and other specifications for the binding mounting area. 1.3 For snowboards with fixed inserts, see ISO 10958-2. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts

ISO 8061:2019 高山滑雪带.释放力矩值的选择

This document specifies methods for the selection of the release torques for alpine ski-bindings. It gives information necessary to determine the release torques recommended for use by ski-binding manufacturers in their instructions for installation and use, and by ski shops for the adjustment of ski- bindings already mounted. It is applicable to state-of-the-art alpine ski bindings. It might be inappropriate for non-mechanical bindings or bindings used with boots which reach more than half-way up the lower leg. This document describes a specified method for the selection of the recommended release torques considering three types of skiers. The method applies to moment-measuring binding test machines, according to ISO 11110.

Alpine ski-bindings — Selection of release torques values

BS ISO 6005:2019 高山滑雪板 滑雪板固定螺丝 测试方法

What is ISO 6005 - Ski bindings about?    ISO 6005 discusses ski binding screws. A ski binding is a device that connects a ski boot to the ski. Generally, it holds the boot firmly to allow the skier to maneuver the ski.   ISO 6005 specifies test methods for screws used for fastening ski bindings to alpine skis.   Note 1: Acceptance criteria are specified in ISO 6004.   Note 2: A test method for the mounting and fastening characteristics of different ski models is specified in ISO 8364 .  Who is ISO 6005 - Ski bindings for?   ISO 6005 on ski binding screws is useful for:   Ski manufacturers

Alpine skis. Ski binding screws. Test methods

T/HHXBZ 004-2019 高山滑雪板固定器

规定了结构、外观等相关技术要求。

Alpine Ski Bindings

T/HHXBZ 002-2019 高山滑雪杖

本标准规定了高山滑雪杖的结构、材质、总长度、外观、握柄、握柄带、杖杆、雪轮、杖尖等相关技术要求，参照GB/T 31169  滑雪运动装备使用要求。

alpine ski poles

T/HHXBZ 001-2019 高山滑雪板

本标准规定了高山滑雪板的外观、结构、材质、尺寸等相关技术要求。

alpine skis

T/HHXBZ 003-2019 聚乙烯树脂 后入式高山滑雪鞋

规定了鞋号、材质、外观、尺寸、内靴、对称性、冲击试验、安全要求等相关技术要求。

Poly Resin Rear Entry Alpine Ski Boots

ISO 6005:2019 高山滑雪板.滑雪板固定螺钉.试验方法

This document specifies test methods for screws used for fastening ski bindings to alpine skis. NOTE 1 Acceptance criteria are specified in ISO 6004. The results of these test methods characterize the properties of the binding screw. NOTE 2 A test method for the mounting and fastening characteristics of different ski models is specified in

Alpine skis — Ski binding screws — Test methods

BS ISO 5355:2019 高山滑雪靴 要求及测试方法

What is ISO 5355 —Alpine ski-boots about ? ISO 5355 is an international standard that covers the specifications for Alpine ski boots. ISO 5355 specifies the requirements, test methods, and marking of the Alpine ski-boots which are used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel. The proper release function of these Alpine ski boots depends on the dimensions and design of the interfaces. Note: ISO 5355 applies to ski-boots of sizes 15,0 and larger [types A (for adults) and C (for children)] in the Mondopoint system. Who is ISO 5355 —Alpine ski-boots for? ISO 5355 on alpine ski-boots is useful for: Ski-boots manufactures Ski instructors Ski resorts   Why should you use ISO 5355 —Alpine ski-boots  ? Skiing is a dangerous activity with very little safety equipment, The most important skiing equipment after ski-board are the alpine ski-boots. Ski boots are footwear used in skiing to provide a way to attach a skier to skis using ski-binding. Ski boots/binding is used to effect...

Alpine ski-boots. Requirements and test methods

ISO 9523:2019 旅游滑雪靴成人 - 界面与旅游滑雪绑定 - 要求和测试方法

This document specifies the dimensions and characteristics of the interface, requirements, test methods, and marking of ski-boots with a rigid sole (see 3.5) which are used with current systems of touring ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces. For ski-binding systems that function irrespective of the sole shape or that have different requirements for the sole dimensions, it is not always necessary for the ski-boot soles to comply with this document in order to achieve the desired degree of safety. This document is applicable to ski-boots of sizes 15,0 and larger in the Mondopoint system (see Annex A). It is applicable to rigid touring boots. Boots with softer shells like Telemark boots are excluded as they do not have the necessary shell stability to act as part of the release systems.

Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods

TY/T 3903-2019 低氧呼吸训练系统使用要求和检验方法

Hypoxic respiratory training system usage requirements and inspection methods

ISO 5355:2019 高山滑雪靴.要求和试验方法

This document specifies the requirements, test methods and marking of ski-boots which are used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces. For ski-binding systems that function irrespective of the sole shape or that have different requirements for the sole dimensions, it is not always necessary for the ski-boot soles to comply with this document in order to achieve the desired degree of safety. It applies to ski-boots of sizes 15,0 and larger [types A (for adults) and C (for children)] in the Mondopoint system (see Annex A).

Alpine ski-boots — Requirements and test methods

ISO 9838:2019 高山和旅游滑雪绑定 - 测试鞋用于滑雪测试

This document defines test soles representing — an alpine ski-boot (form A) or at least the bottom part of it to be used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465, and — a touring ski-boot (form T) or at least the bottom part of it to be used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465. NOTE Ski-boots have their own International Standards (ISO 5355 and ISO 9523) that allow relatively large tolerances in defining the test sole which are generally believed to be suitable for on-slope use by skiers, but too large for reproducible laboratory measurements.

Alpine and touring ski-bindings — Test soles for ski-binding tests

ISO 13993:2019 租赁滑雪场实践 - 在租赁应用中完成和不完整的高山滑雪装载系统的采样和检查

This document specifies a uniform method for the sampling and inspection of complete and incomplete alpine ski-binding-boot systems used in rental operations. This document is intended for any facility which rents complete and incomplete alpine ski-binding-boot systems as for example when the skier owns the boots. This document is not applicable for alpine touring ski-binding-boot systems. This document is not applicable for complete and incomplete alpine ski-binding-boot systems which are rented for 15 days or more. NOTE 1 A period of less than 15 days is common for equipment being rented. NOTE 2 ISO 11088 gives a method for testing if the equipment is owned or rented for 15 days or more.

Rental ski shop practice — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications

TY/T 3902-2019 体育彩票专用热敏纸技术要求及检验方法

Technical requirements and inspection methods for special thermal paper for sports lottery

TY/T 3901-2019 滑雪模拟机通用安全要求和试验方法

General safety requirements and test methods for ski simulators

ASTM F939-19 选择高山滑雪绑定释放扭矩值的标准实践

1.1 This practice provides procedures for the selection of release torque values for Alpine ski/boot/bindings systems. These procedures may be used by ski binding manufacturers in their instructions for installation and use and by ski shops for the adjustment of already mounted ski bindings. 1.2 This practice is applicable to releasable Alpine ski/boot/ binding systems. 1.3 Release torque values selected using this practice may not be appropriate for circumstances in which: 1.3.1 The skier carries an object that significantly increases the skier’s effective body weight, 1.3.2 The skier grasps or in some manner controls an object such as a sled, or 1.3.3 The skier encounters exceptional snow or terrain conditions not commonly found on developed ski slopes. 1.4 This practice may be inappropriate for non-mechanical bindings or bindings used with boots that reach more than half way up the lower leg. 1.5 Release torque values outside the recommendations of this practice may increase the risk of injury to the skier. However, skiers who are informed of this potential risk may request such settings and have them provided, subject to any guidelines and limitations specified by the binding manufacturer. 1.6 These values refer to recommended release torque for initial adjustment of a ski binding and subsequent readjustment of the binding during routine maintenance or following a suspected malfunction. However, these values are not intended to apply to the condition of the equipment at any time after it is put into use. 1.6.1 For information concerning applicable tolerances to be used for the adjustment and inspection of releasable Alpine ski bindings in retail operations consult Practice F1063; for rental applications consult Practice F1064. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings

KS G ISO 11110-2018 冬季运动器材 - 测试设备功能单元的设置滑雪/启动/绑定 - 要求和测试

Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests