97.220.20 标准查询与下载

BS ISO 7139:2017 越野滑雪板 弹性性能的测定

1   Scope This document specifies laboratory measurement methods to determine the elastic properties of cross-country skis. Its purpose is to calculate the resistance of defined parts of the ski to bending. This document applies to cross-country skis with a nominal length greater than or equal to 150 cm. The standard measurement procedures can be used to ensure comparability between laboratory measurement data, determined and published by ski manufacturers, institutions or others. In this document, no attempt is made to relate the measurement data to the quality of the ski.

Cross-country skis. Determination of elastic properties

KS G ISO 14573-2017(2022) 软靴用滑雪板绑带.要求和试验方法

Snowboard strap bindings for soft boots — Requirements and test methods

KS G ISO 14573-2017 软靴的单板绑带绑定 - 要求和测试方法

Snowboard strap bindings for soft boots — Requirements and test methods

KS G ISO 14573:2017 软靴的单板绑带绑定 - 要求和测试方法

Snowboard strap bindings for soft boots — Requirements and test methods

ISO 8364:2017 高山雪橇和装配 捆绑安装区 要求和试验方法

This document specifies requirements and test methods for the binding mounting area and free space area, ski bindings and retention devices of alpine skis, in order to optimize the compatibility of the functional unit “ski binding — retention device — boot”. It contains data for the manufacturer of alpine skis, bindings and retention devices, concerning dimensions, tests and other specifications for the binding mounting area.

Alpine skis and bindings - Binding mounting area - Requirements and test methods

BS ISO 7138:2017 越野滑雪板 质量和平衡点位置的确定

Cross-country skis. Determination of mass and location of balance point

ISO 10045:2017 高山雪橇 捆绑安装区 试验螺钉的要求

This document specifies the dimensions, mechanical properties and fastening characteristics of test screws used for testing the binding mounting area of alpine skis.

Alpine skis - Binding mounting area - Requirements for test screws

ISO 7139:2017 越野雪橇 弹性的测定

This document specifies laboratory measurement methods to determine the elastic properties of cross- country skis. Its purpose is to calculate the resistance of defined parts of the ski to bending. This document applies to cross-country skis with a nominal length greater than or equal to 150 cm. The standard measurement procedures can be used to ensure comparability between laboratory measurement data, determined and published by ski manufacturers, institutions or others. In this document, no attempt is made to relate the measurement data to the quality of the ski.

Cross-country skis - Determination of elastic properties

ISO 7798:2017 越野雪橇 疲劳指标的测定 周期性载荷试验

This document specifies a method for the determination of the fatigue indexes of cross-country skis (i.e. the resistance of the skis to changes of bottom camber height or irreversible damage) after a bending test with cyclic loading. It is applicable to cross-country skis with a nominal length of 160 cm to 215 cm.

Cross-country skis - Determination of fatigue indexes - Cyclic loading test

ISO 7138:2017 越野雪橇.质量的测定和平衡点位置

This document specifies laboratory measurement methods for mass and location of the balance point of cross-country skis. If laboratory measurement data are determined and published by manufacturers or other institutions, standard measurement procedures can be used to ensure comparability. It is not the purpose of this document to evaluate the measurement data with regard to their influence on the quality of the ski.

Cross-country skis - Determination of mass and location of balance point

ISO 6003:2017 高山雪橇.雪橇质量和惯性极力矩的测定.实验室测量法

This document specifies laboratory measurement methods for mass and polar moment of inertia of alpine skis. If laboratory measurement data are determined and published by the ski manufacturer or other institutions, standard measurement procedures can be used to ensure comparability. This document also specifies a tolerance range which can be met by the measurement data of all manufactured skis, if for the specific model length measurement data are published by the manufacturer of the ski. NOTE The appropriate ski length can be given with the published measurement data. It is not the purpose of this document to evaluate the measurement data with regard to their influence on the quality of the ski.

Alpine skis - Determination of mass and polar moment of inertia - Laboratory measurement method

DB13/T 2569-2017 滑雪场所安全管理规范

Safety management norms for ski resorts

DB13/T 2568-2017 滑雪用安全防护网通用技术要求

General technical requirements for safety nets for skiing

ASTM F473-09(2017) 高山滑雪板和绑定装订安装区尺寸的标准规范

1.1 This specification covers2 dimensions for binding mounting areas for alpine skis and mounting-related dimensions on alpine ski bindings as part of an interface (“skibinding-boot”) system, in order to optimize the compatibility of the functional elements of the system. It contains data needed for the manufacture of alpine skis, and for manufacturers of alpine ski bindings, specifically with respect to the binding mounting area. This specification is applicable to alpine skis of the following chord lengths (see Terminology F472 for the definition of chord length, LN): Group 1: LN $ 1700 mm Group 2: 1400 mm # LN < 1700 mm Group 3: 1000 mm # LN < 1400 mm Group 4: 750 mm # LN < 1000 mm 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings

ASTM F504-05(2017) 测量高山滑雪绑定准静态释放时刻的标准测试方法

1.1 This test method covers a procedure for the measurement of release moments of ski bindings under conditions where inertia loadings of the ski binding system are not significant. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

ASTM F504-05(2017)e1 测量高山滑雪板固定装置准静态释放力矩的标准试验方法

Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings

ASTM F472-11(2017) 高山滑雪几何的标准术语

1.1 This terminology covers the terms required to describe the geometry of Alpine skis and does not cover special purpose skis. 1.2 The terms are presented in a sequence considered to be the most logical, with definitions presented later calling upon those presented earlier.

Standard Terminology for Geometry of Alpine Skis

GOST R 57534-2017 越野滑雪板 滑雪板固定螺丝 测试方法

Cross-country skis. Ski-binding screws. Test methods

GOST R 57538-2017 永久安装的户外健身器材 一般安全要求和测试方法

Permanently installed outdoor fitness equipment. General safety requirements and test methods

GOST R 57535-2017 越野滑雪板 滑雪板固定螺丝 要求

Cross-country skis. Ski-binding screws. Requirements