97.220.20 标准查询与下载

GOST R 57536-2017 越野滑雪板 绑定安装区域 测试螺钉的要求

Cross-country skis. Binding mounting area. Requirements for test screws

GOST R 57537-2017 冬季运动装备 用于设置滑雪靴绑定功能单元的测试设备 要求和测试

Winter-sports equipment. Test devices for the setting of the functional unit ski-boot-binding. Requirements and tests

GOST R 57534-2017 越野滑雪板 滑雪板固定螺丝 测试方法

Cross-country skis. Ski-binding screws. Test methods

GOST R ISO 11087-2017 高山雪橇紧固. 紧固装置. 要求和试验方法

Alpine ski-bindings. Retention devices. Requirements and test methods

GOST R ISO 7331-2017 高山滑雪滑雪杆. 安全要求和试验方法

Ski-poles for alpine skiing. Safety requirements and test methods

GOST R ISO 13993-2017 滑雪租用商店管理. 出租用整套和非整套高山滑雪板-绑带-靴系统的抽样和检验

Rental ski shop practice. Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications

GSO ISO 7138:2016 越野滑雪板质量和平衡点位置的测定

This international Standard specifies laboratory measurement methods for mass and location of the balance point of crosscountry skis. If laboratory measurement data are determined and published by manufacturers or other institutions, standard measurement procedures are recommended to ensure comparability. It is not the purpose of this International Standard to evaluate the measurement data with regard to their influence on the quality of the ski.

Cross-country skis -- Determination of mass and location of balance point

GSO ISO 8364:2016 高山滑雪板和固定器 固定器安装区域 要求和测试方法

This International Standard specifies requirements and test methods for the binding mounting area and free space area, ski bindings and retention devices of alpine skis, in order to optimize the compatibility of the functional unit "ski binding — retention device — boot". It contains data for the manufacturer of alpine skis, bindings and retention devices, concerning dimensions, tests and other specifications for the binding mounting area.

Alpine skis and bindings -- Binding mounting area -- Requirements and test methods

GSO ISO 6265:2016 高山滑雪板变形载荷和断裂载荷的测定

This International Standard specifies a method for determining the resistance of alpine skis to permanent deformation and breaking. In this International Standard no attempt is made to relate the measurement data to the quality of the ski. lt is applicable to all alpine skis for adults, juveniles and children.

Alpine skis -- Determination of deformation load and breaking load

GSO ISO 9119:2016 越野滑雪板固定安装区域要求和试验方法

1.1 This International Standard specifies requirements and test methods for the binding mounting areas of cross-country skis, within which parts of the toe-clip binding in accordance with ISO 6960 may be mounted. Different values are specified for two groups of nominal ski lengths, lN: Group 1: 1 750 mm > lN ≤ 2 200 Group 2: 1 300 mm ≤ lN ≤ 1 750 mm It specifically excludes alpine skis. 1.2 A designated binding attachment area, or binding mounting area (see 3.1), shall be provided by the ski manufacturer and shall be the only area of the ski subjected to this test. 1.3 This International Standard covers skis the bindings of which are attached by means of screws in area A1 and screws, nails or other fasteners in areas A2 and A3 (see figure 1 and figure 2). 1.4 Using test screws loaded normal to the ski surface, the test methods specified simultaneously evaluate the tendency of — screws to be pulled out; — skis to delaminate; — screw hole threads to strip.

Cross-country skis -- Binding mounting area -- Requirements and test methods

GSO ISO 6003:2016 高山滑雪板质量和极惯性矩的测定实验室测量方法

This International Standard specifies laboratory measurement methods for mass and polar moment of inertia of alpine skis. If laboratory measurement data are determined and published by the ski manufacturer or other institutions, standard measurement procedures are recommended to ensure comparability. This International Standard also specifies a tolerance range which shall be met by the measurement data of all manufactured skis, if for the specific model length measurement data are published by the manufacturer of the ski. NOTE The appropriate ski length should be given with the published measurement data. It is not the purpose of this International Standard to evaluate the measurement data with regard to their influence on the quality of the ski.

Alpine skis -- Determination of mass and polar moment of inertia -- Laboratory measurement method

GSO ISO 6266:2016 高山滑雪板疲劳指标的测定循环加载试验

This International Standard specifies a method for the determination of the fatigue indexes of alpine skis (i.e. the resistance of the skis to changes in shape and of stiffness) after a bending test with cyclic loading.

Alpine skis -- Determination of fatigue indexes -- Cyclic loading test

GSO ISO 5355:2016 高山滑雪靴 要求和测试方法

This International Standard specifies the requirements, test methods and marking of ski-boots which are used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces. For ski-binding systems that function irrespective of the sole shape or that have different requirements for the sole dimensions, it is not always necessary for the ski-boot soles to comply with this International Standard in order to achieve the desired degree of safety. It applies to ski-boots of sizes 15,0 and larger (types A and C) in the Mondopoint system (see Annex A).

Alpine ski-boots -- Requirements and test methods

GSO ISO 7798:2016 越野滑雪疲劳指标的测定循环加载试验

This International Standard specifies a method for the deter-mination of the fatigue indexes of cross-country skis (i.e. the resistance of the skis to changes of bottom camber height or ir-reversible damage) after a bending test with cyclic loading. It is applicable to cross-country skis with a nominal length of 160 cm to 215 cm.

Cross-country skis -- Determination of fatigue indexes -- Cyclic loading test

GSO ISO 8061:2016 高山滑雪固定器 释放扭矩值的选择

This International Standard specifies methods for the selection of the release torques for alpine ski-bindings in current use, and gives information necessary to determine the release torques. It applies to torque-measuring binding-test machines. It may be inappropriate for non-mechanical bindings or bindings used with boots which reach more than halfway up the lower leg. NOTE Manufacturers may use either of the two specified methods as the basis for their recommended release torques. Release torques are to be recommended for use by ski-binding manufacturers in their instructions for installation and use, and by ski shops for the adjustment of already mounted ski-bindings.

Alpine ski-bindings -- Selection of release torque values

GSO ISO 6267:2016 高山滑雪板 弯曲振动的测量

This International Standard specifies a method for the determination of the natural frequency and the half life of the bending vibrations of an alpine ski which is clamped in the binding mounting area and can vibrate in the ski forebody. It is applicable to skis having nominal lengths of 150 cm or more.

Alpine skis -- Measurement of bending vibrations

GSO ISO 7139:2016 越野滑雪板弹性性能的测定

This International Standard specifies laboratory measurement methods to determine the elastic properties of cross-country skis. Its purpose is to calculate the resistance of defined parts of the ski to bending. This International Standard applies to cross-country skis with a nominal length greater than or equal to 150 cm. The standard measurement procedures are recommended in order to ensure comparability between laboratory measurement data, determined and published by ski manufacturers, institutions or others. In this International Standard no attempt is made to relate the measurement data to the quality of the ski.

Cross-country skis -- Determination of elastic properties

GSO ISO 6004:2016 高山滑雪板 滑雪板固定螺丝 要求

This International Standard specifies the dimensions, mechanical properties and fastening characteristics of screws used for mounting ski bindings on alpine skis. The purpose of this International Standard is to facilitate the design of a more rational and safer binding mounting system.

Alpine skis -- Ski binding screws -- Requirements

GSO ISO 7794:2016 越野滑雪板 滑雪板固定螺丝 要求

This International Standard specifies the dimensions, mechanical properties, mounting and fastening characteristics of screws used for mounting ski bindings on cross-country skis. The purpose of this International Standard is to facilitate the design of a more rational and safer binding mounting system.

Cross-country skis -- Ski-binding screws -- Requirements

GSO ISO 8783:2016 高山滑雪板 进行斜坡性能测试的指南

This International Standard provides guidelines for carrying out comparative testing of alpine skis with the objective of evaluating the performance characteristics. It is applicable to alpine skis in accordance with ISO 6289.

Alpine skis -- Guidelines for conducting slope performance tests