97.220.30 标准查询与下载

T/CSTE 0207-2022 质量分级及 “领跑者”评价要求 磁控健身车

4 评价指标体系 4.1 基本要求 4.2 评价指标分类 4.3 评价指标体系 5 评价方法及等级划分

Assessment requirements for quality grading and forerunner —magnetic exercise bicycles

T/CSTE 0206-2022 质量分级及“领跑者”评价要求 动感单车

4 评价指标体系 4.1 基本要求 4.2 评价指标分类 4.3 评价指标体系 5 评价方法及等级划分

Assessment requirements for quality grading and forerunner—stationary exercise bicycles

T/CSTE 0157-2022 质量分级及“ 领跑者 ”评价要求 跑步机

4 评价指标体系 4.1 基本要求 4.2 评价指标分类 4.3 评价指标体系 5 评价方法及等级划分

Assessment requirements for quality grading and forerunner— Treadmill

T/CGAGOLF 0001-2022 室内高尔夫球馆通用规范

设施设备要求  室内高尔夫球馆的空间要求  安装高尔夫球模拟器设备的空间：宽应不小于 3.6m、前后进深应不小于 5.5m、高应不小于 3.0m。  室内高尔夫球馆应提前预留感应器槽及路板；应在留好的地台板上安装打击垫。  地台及台面 地台的安装应使用优质板材铺装，应安装稳固并可收纳被击打的回球。  台面应采用符合 GB/T 20394-2019 体育用人造草进行包装铺设。 照明  室内高尔夫球馆内击球空间照度应符合GB 50034的规定。 网络 应有网络系统覆盖。 场馆信息化系统建设应符合 JGJ/T 179 的规定。  应配备会员用户信息管理系统。  认证  室内高尔夫球馆的设计、建设应选用具有相关资质的单位。 应配置经中国高尔夫球协会认证具有相关资质的高尔夫球模拟器。

General standard for indoor golf venue

22/30451305 DC BS EN ISO 20957-2 固定式训练设备 第 2 部分：力量训练设备、附加具体安全要求和测试方法

BS EN ISO 20957-2. Stationary training equipment - Part 2. Strength training equipment, additional specific safety requirements and test methods

22/30451309 DC BS EN ISO 20957-7 固定训练设备 第 7 部分：划船设备、附加具体安全要求和测试方法

BS EN ISO 20957-7. Stationary training equipment - Part 7. Rowing equipment, additional specific safety requirements and test methods

T/CSGF 018.2-2022 户外运动用品 第2部分：手推车

本文件规定了户外运动用手推车的结构、要求、试验方法、检验规则、标识、包装、运输及贮存。 本文件适用于户外运动载物时使用的四轮户外运动用手推车。

Outdoor sporting goods— Part 2: Folding wagon

T/CNHB 0002-2021 手球

本标准规定了手球的术语和定义、产品分类、要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于适用于竞赛及日常活动用手球。

Handball

T/CSGF 016-2021 手球

本标准规定了手球的术语和定义、产品分类、要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于适用于竞赛及日常活动用手球。

Handball

T/CSGF 014-2021 小蹦床

本文件规定了小蹦床的术语和定义、分类与结构、要求、试验方法、标识、警示标识和使用说明、包装、运输及储存。 本文件适用于框架直径或内切圆直径153cm以下,弹跳网面离地面高度40cm以下的小蹦床。 本文件不适用于3岁及以下年龄段使用的小蹦床。

small trampoline

ASTM F1081-09(2021) 竞赛用摔跤垫的标准规范

1.1 This specification covers competition wrestling mats used at the high school and college levels. All mat constructions are included, except felt-core mats enclosed in sewn covers. The intended use of this standard is for the qualification of construction designs. NOTE 1—The known constructions, as of the issuance of this specification are: (1) closed-cell foam cores with polyvinyl chloride (PVC) or PVC copolymer coatings, or both, which are integral parts of the mat; (2) closed-cell foam cores with attached fabric cover; (3) foam cores, either openor closed-cell enclosed in sewn, loose covers, and (4) molded open-cell PVC foam with a dense skin on one surface which is an integral part of the mat. NOTE 2—There is no known ISO equivalent to this standard. 1.2 This specification covers mats used in the two major styles of wrestling: U.S. collegiate or high school, and international free style. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Note 6 for specific hazards statements. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Competition Wrestling Mats

T/CSSGA 1037-2021 篮球

5.1　原料安全要求 5.2　质量 5.3　圆周长、圆周差 5.4　圆度 5.5　气密性 5.6　反弹高度 5.7　耐冲击性能 5.8　外观

Basketball

T/CSSGA 1038-2021 排球

5.1　原料安全要求 5.2　质量 5.3　圆周长、圆周差 5.4　圆度 5.5　气密性 5.6　反弹高度 5.7　耐冲击性能 5.8　外观

Volleyball

DIN EN 913:2021 体操器材-一般安全要求和测试方法；德文版 EN 913:2018+A1:2021

This document specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and for all pieces of equipment for the use of physical education, training and competition, intended for use supervised by a competent person and not specified i

Gymnastic equipment - General safety requirements and test methods; German version EN 913:2018+A1:2021

BS EN 913:2018+A1:2021 体操器材 一般安全要求和测试方法

What is BS EN 913 about?    BS EN 913 discusses gymnastic equipment. BS EN 913 specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and all pieces of equipment for the use of physical education, training, and competition, intended for use supervised by a competent person and not specified in other, individual standards and/or federation rules.   Note: The provisions relating to certain materials in BS EN 913 do not imply that other equivalent materials are unsuitable in the manufacture of multi-sports equipment.  Who is BS EN 913 for?   BS EN 913 on gymnastic equipment is useful for:

Gymnastic equipment. General safety requirements and test methods

UNI EN ISO 20957-2:2021 固定式训练设备 第2部分：力量训练设备、附加特定安全要求和测试方法

Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods

UNI EN ISO 20957-7:2021 固定训练设备 第7部分：划船设备，附加特定安全要求和测试方法

Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods

UNI EN 913-2021 体操器材 一般安全要求和测试方法

Gymnastic equipment - General safety requirements and test methods

BS EN ISO 20957-2:2021 固定式训练设备 力量训练设备、附加具体安全要求和测试方法

Stationary training equipment. Strength training equipment, additional specific safety requirements and test methods

KS G 5821-2-2021 游泳池设备 第2部分：梯子、活梯和手柄弯管的附加具体安全要求和测试方法

Swimming pool equipment－Part 2：Additional specific safety requirements and test methods for ladders, stepladders and handle bends