A15 电影与摄影技术 标准查询与下载

BS ISO 2906:2002 电影技术.用摄象机快门在35mm电影胶片上形成的影象区.位置和尺寸

This International Standard specifies the dimensions of the camera aperture images and the relative positions of the vertical and horizontal centrelines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 35 mm motion-picture cameras. Motion-picture cameras used for different purposes require different aperture sizes. This International Standard specifies the image dimensions resulting from four styles of apertures used for the following purposes. — Style A: Four perforations per frame nonanamorphic sound motion pictures. — Style B: Four perforations per frame anamorphic sound motion pictures. — Style C: Four perforations per frame instrumentation photography and full-frame motion pictures. — Style D: Three perforations per frame motion pictures. This International Standard also specifies the position of the photographic emulsion and the frame rate for 35 mm motion-picture cameras.

Cinematography - Image area produced by camera aperture on 35mm motion picture film - Position and dimensions

ISO 2906:2002 电影技术.电影摄影机在胶片35mm上形成的影象区.位置和尺寸

This International Standard specifies the dimensions of the camera aperture images and the relative positions of the vertical and horizontal centrelines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 35 mm motion-picture cameras. Motion-picture cameras used for different purposes require different aperture sizes. This International Standard specifies the image dimensions resulting from four styles of apertures used for the following purposes. — Style A: Four perforations per frame nonanamorphic sound motion pictures. — Style B: Four perforations per frame anamorphic sound motion pictures. — Style C: Four perforations per frame instrumentation photography and full-frame motion pictures. — Style D: Three perforations per frame motion pictures. This International Standard also specifies the position of the photographic emulsion and the frame rate for 35 mm motion-picture cameras.

Cinematography - Image area produced by camera aperture on 35 mm motion-picture film - Position and dimensions

BS ISO 14648-1:2002 显微摄影技术.采用单内显示系统生成图像的COM记录器的质量控制.软件测试目标的特性

This part of ISO 14648 specifies the characteristics of a software test target that is electronically generated, to be used in COM recorder systems that can accept electronic forms. The components have been designed to check or test certain capabilities of the COM recorder system in order to enable image quality to be assessed and maintained. The recording method (i.e. laser scanner, cathode ray tube, light emitting diode, etc.) is not relevant in establishing the software test target components.

Micrographics - Quality control of COM recorders that generate images using a single internal display system - Characteristics of the software test target

BS ISO 14648-2:2002 显微摄影技术.采用单内显示系统生成图像的COM记录器的质量控制.使用方法

This part of ISO 14648 specifies methods for using the software test targets specified in ISO 14648-1.

Micrographics - Quality control of COM recorders that generate images using a single internal display system - Method of use

ISO 4241:2001 电影 电影院放映片头、片尾和辅助标志 规范

This International Standard specifies the make-up or assembly of leaders and cue marks for 70 mm, 35 mm and 16 mm motion-picture release prints for use in motion-picture theatres and screening rooms. NOTE Extraneous materials are dealt with in informative annex A.

Cinematography - Theatre projection leader, trailer and cue marks - Specifications

BS ISO 14807:2001 摄影技术.透射和反射光密度计.性能测定方法

This International Standard defines a common set of reporting parameters and describes the methods to be used in the determination and presentation of individual densitometer performance and manufacturer-reported performance specifications. This International Standard applies to transmission and reflection densitometers typically manufactured for and used by the photographic, graphic arts and radiographic trades.

Photography - Transmission and reflection densitometers - Method for determining performance

ISO 14807:2001 摄影 透射和反射密度测量仪 性能测定方法

This International Standard defines a common set of reporting parameters and describes the methods to be used in the determination and presentation of individual densitometer performance and manufacturer-reported performance specifications. This International Standard applies to transmission and reflection densitometers typically manufactured for and used by the photographic, graphic arts and radiographic trades.

Photography - Transmission and reflection densitometers - Method for determining performance

BS ISO 8374:2001 摄影.ISO安全光条件的测定

This International Standard specifies the methods for determining the maximum exposure time that a given sensitized material can receive from a given safelight without affecting the quality of the final image. It also specifies the records which shall be maintained for the components of a safelight and its operating environment.

Photography - Determination of ISO safelight conditions

BS ISO 14535:2001 摄影技术.电子扫描仪、成像胶片和胶卷的室光负载包装件.尺寸和有关要求

This International Standard applies to room-light loading packages either containing photographic film or paper rolls for electronic scanners or image-setting devices. It specifies the dimensions of the package and its contents, critical equipment interfacing features, and package marking. The prime aim of this International Standard is to ensure compatibility between room-light loading packages and the equipment in which it is used. Two types of package are recognized. One type uses a rigid flange into which mandrils on the exposing device are inserted. The other type uses a flexible flange and relies on the exposing equipment design to hold the roll correctly in the machine.

Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements

BS 1384-2:2001 摄影密度测量.传输密度的几何条件

This part of ISO 5 specifies the geometric conditions for measuring ISO diffuse and f/4,5 and f/1,6 projection transmission densities. Diffuse density is primarily applicable to measurements of photographic images to be viewed on a transparency illuminator (viewing box), to be contact printed, or to be projected with a system employing diffuse irradiation. Projection density is primarily applicable to measurements of photographic images to be projected with systems employing optical condensers. Although primarily intended for the measurement of photographic images, the densitometric methods specified in this part of ISO 5 are often applied to optical filters and other transparent materials.

Photographic density measurements - Geometric conditions for transmission density

ISO 8374:2001 摄影 ISO安全光条件的测定

This International Standard specifies the methods for determining the maximum exposure time that a given sensitized material can receive from a given safelight without affecting the quality of the final image, it also specifies the records which shall be maintained for the components of a safelight and its operating environment.

Photography - Determination of ISO safelight conditions

BS ISO 17332:2001 电影摄影.35mm电影彩色拷贝胶片用生产商印制的隐约图像识别信息

This International Standard specifies the position, dimensions, content and exposure of human-readable, latent image information applied onto 35 mm colour-print film. This information is normally exposed onto the film at the time of manufacture. This International Standard also specifies spectral densities and a film area which is not to be exposed by the film manufacturer, thus leaving it available for subsequent customer data recording such as soundtrack recording, etc.

Cinematography - Manufacturer printed latent image identification information for 35mm motion-picture colour-print film - Specifications

ISO 17121:2000/cor 1:2001 电影 影片和电视生产用工作场所 视听条件的要求 技术勘误1

This standard is Cinematography - Work stations used for film and video production - Requirements for visual and audio conditions; Technical Corrigendum 1.

Cinematography - Work stations used for film and video production - Requirements for visual and audio conditions; Technical Corrigendum 1

BS ISO 14546:2000 摄影技术.航空胶片和卷轴.尺寸

This International Standard specifies dimensions for films, leaders and trailers, perforations where applicable, and package marking for rolls of photographic film used in aerial applications. This International Standard also includes the sizes and dimensions of steel or aluminium spools for appropriate sizes of film.

Photography - Aerial films and spools - Dimensions

ISO 17332:2001 电影彩印胶片 35mm 电影彩印胶片上厂家印制的潜影标记信息 规范

This International Standard specifies the position, dimensions, content and exposure of human-readable, latent image information applied onto 35 mm colour-print film. This information is normally exposed onto the film at the time of manufacture. This International Standard also specifies spectral densities and a film area which is not to be exposed by the film manufacturer, thus leaving it available for subsequent customer data recording such as soundtrack recording, etc.

Cinematography - Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film - Specifications

BS ISO 1009:2000 摄影技术.相纸尺寸.印片机用卷纸

This International Standard specifies the aim and tolerance values for the nominal widths of rolls of black-and-white and colour photographic papers for use in contact and projection printers. It also specifies splice parameters, core dimensions, requirements for winding, and package marking.

Photography - Paper dimensions - Rolls for printers

BS ISO 11698-2:2001 缩微摄影技术.开窗卡扫描仪生成影像质量的测量方法.质量标准和控制

This part of ISO 11698 specifies methods for using the test images specified in ISO 11698-1 to check the quality of images produced by aperture card scanners.

Micrographics - Methods of measuring image quality produced by aperture card scanners - Quality criteria and control

BS ISO 11698-1:2001 缩微照相.开窗孔卡扫描仪生成影像质量的测量方法.测试影像的特性

This part of ISO 11698 specifies the characteristics of the test images used for evaluating or checking the quality of electronic images generated by aperture card scanners.

Micrographics - Methods of measuring image quality produced by aperture card scanners - Characteristics of the test images

BS ISO 732:2000 摄影技术.120和220规格的胶片.尺寸

This International Standard provides specifications for — dimensions of 120-size and 220-size films and of the spools common to both, — dimensions of the backing paper for 120-size film and the leader and trailer paper for 220-size film, as well as the placement of the paster tape used for attaching these papers to the films, — minimum length of film required in front of the leading edge of the first image and behind the trailing edge of the last image, and — markings on the backing paper and the trailer-paper for identification of the intended photofinishing process.

Photography - 120-size and 220-size films - Dimensions

ISO 897:2000 摄影 126、110和135胶卷 成相面的识别

This International Standard specifies different means of identification of the image-bearing side of roll films and 126,110 and 135-size films that carry edge markings. This International Standard is not applicable to cinematographic films.

Photography - Roll films, 126, 110 and 135-size films - Identification of the image-bearing side