A26 颜色 标准查询与下载

SANS 1091:2004 国家颜色标准

Identifies a number of colours for use in various industries, mainly for colour identification and coding. The selected colours are linked to the Natural Color System.The Natural Color System (NCS) describes colour perceptions that appear to belong to th

National colour standard

JIS Z 8729:2004 色别规格.国际照明委员会LAB和LUV系统的色带间隔

この規格は，物体色をLab表色系()及びLuv表色系()によって表示する方法につい て規定する。

Colour specification -- CIELAB and CIELUV colour spaces

JIS Z 9112:2004 用色度和分色表对荧光灯进行分类

この規格は，JIS C 7601に規定する一般照明用の蛍光ランプ(以下，蛍光ランプという。)の光源色及び演色性による区分について規定する。

Classification of fluorescent lamps by chromaticity and colour rendering property

ASTM D1544-04 透明液体颜色的标准试验方法(加德纳色标)

This test method applies to drying oils, varnishes, fatty acids, polymerized fatty acids, and resin solutions. Its application to other materials has not been tested.1.1 This test method covers the measurement of the color of transparent liquids by means of comparison with arbitrarily numbered glass standards.1.2 Users of this method should have normal color vision.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

ASTM D1544-04(2010) 透明液体颜色的标准测定方法(加德纳色度法)

This test method applies to drying oils, varnishes, fatty acids, polymerized fatty acids, and resin solutions. Its application to other materials has not been tested.1.1 This test method covers the measurement of the color of transparent liquids by means of comparison with arbitrarily numbered glass standards. 1.2 Users of this method should have normal color vision. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

ASTM E1331-04 用半球体几何形状的分光光度法测量反射系数和颜色的标准试验方法

1.1 This test method describes the instrumental measurement of the reflection properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere.1.2 The test method is suitable for use with most object-color specimens. However, it should not be used for retroreflective specimens or for fluorescent specimens when highest accuracy is desired. Specimens having intermediate-gloss surfaces should preferably not be measured by use of this geometry.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry

KS A 0062-2003 根据色彩三要素的颜色表示法

이 규격은 표면색(이하 색이라 한다.)의 색감각의 3속성(색상, 명도, 채도)을 따라서

Colour specification-Specification according to their three attributes

KS M ISO 2211:2003 液态化学制品.以哈森(Hazen)单位(铂.钴标度)的颜色测量

이 규격은 액상 화학 제품의 하젠 단위에 의한 색도 측정에 대해 규정한다.기준 백금

Liquid chemical products-Measurement of colour in Hazen units(platinum-cobalt scale)

ISO 7010:2003 图形符号.安全颜色和安全标志.用于工作地点及公共场所的安全标志

This International Standard prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour required to be used for each sign, as prescribed by ISO 3864-1, is given together with the graphical symbols contained within each sign. This International Standard is generally applicable to safety signs in workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this International Standard and of ISO 3864-1. This International Standard specifies the safety sign originals that may be scaled for reproduction and application purposes. Supplementary text signs may be used in conjunction with these safety signs to improve comprehension.

Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas

DIN EN 60073:2003 人-机接口、标记和标识的基本规则和安全规则.指示器和致动器编码原理

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (IEC 60073:2002); German version EN 60073:2002

BS EN 60073:2002 人机接口、标记和识别用基本原理和安全性.指示器和启动器的编码原则

This International Standard establishes general rules for assigning particular meanings to certain visual, acoustic and tactile indications in order to - increase the safety of persons, property and/or the environment through the safe monitoring and control of the equipment or process; - facilitate the proper monitoring, control and maintenance of the equipment or process; - facilitate the rapid recognition of control conditions and actuator positions. This standard is for general application: - from simple cases such as single indicator lights, push-buttons, mechanical indicators, light emitting diodes (LEDs) or video display screens to extensive control stations which may include a wide variety of devices for controlling an equipment or process; NOTE Application of the general coding principles for displays on screens should be carried out without modification. - where the safety of persons, property and/or the environment is involved, and also where the above-mentioned codes are used to facilitate the proper monitoring and controlling of equipment; - where a particular kind of coding is to be assigned by a technical committee to a special function.

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators

IEC 60073:2002 人-机接口,标记和鉴别用的基本原理和安全原则.指示设备和调节器的编码原理

Establishes general rules for assigning particular meanings to certain visual, acoustic and tactile indications. Has the status of a basic safety publication in accordance with IEC Guide 104.

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators

JIS Z 8730:2002 颜色规范.物体颜色的色差

この規格は，物体色の色差を表示する方法について規定する。

Colour specification -- Colour differences of object colours

DIN 6163-5:2002 信号灯颜色和颜色极限值.第5部分:地方公共运输固定信号灯

The document establishes the colour limits for white, stationary signal lights for local public transport. The colour limits of red," yellow and green signal lights ar established in DIN EN 12368 ""Traffic control equipment"".#",#

Colours and colour limits for signal lights - Part 5: Stationary signal lights in local public transport

ASTM E1348-02(2007) 用半球体几何形状的分光光度法测量透明度和颜色的测试方法

The most direct and accessible methods for obtaining the color coordinates of object colors are by instrumental measurement using spectrophotometers or colorimeters with either hemispherical or bidirectional optical measuring systems. This test method provides procedures for such measurement by transmittance spectrophotometry using a hemispherical optical measuring system. This test method is especially suitable for measurement of the following types of specimens (see also Guide E 179 and Practice E 805): 5.2.1 Fully transparent specimens (free from turbidity, haze, or translucency), and 5.2.2 Translucent or hazy specimens, provided that the specimen can be placed flush against the transmission port of the integrating sphere. This test method is not recommended for measurement of transparent or translucent retroreflective or fluorescent specimens.1.1 This test method describes the instrumental measurement of the transmission properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere.1.2 This test method is generally suitable for all fully transparent specimens without regard for the specimen position relative to the transmission port of the instrument. Translucent specimens, however, must be placed flush against the transmission port of the sphere.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

ASTM E1348-02 用半球体几何形状的分光光度法测量透明度和颜色的测试方法

1.1 This test method describes the instrumental measurement of the transmission properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere.1.2 This test method is generally suitable for all fully transparent specimens without regard for the specimen position relative to the transmission port of the instrument. Translucent specimens, however, must be placed flush against the transmission port of the sphere.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

ASTM E2222-02(2007) 颜色测量用带有分光计的主机通信的标准实施规程

The practice should be adopted by spectrometer manufacturers and developers of software to be used on host computers to communicate with such instruments.1.1 This practice provides a standard communications protocol for a serial communication between a host computer and a spectrometer designed for colorimetry. The adoption of the standard communication protocol on the part of instrument manufacturers will allow instrument users the option to employ third-party software, or to replace one instrument with another while retaining the same software. This standard is not intended to replace existing standards, such as SCPI-1999 written by the SCPI Consortium as a set of Standard Commands for Programmable Instruments for bench-top instruments that utilize the IEEE-488 or IEEE-488.2 interface. This standard has been adopted by many analytical instrument makers and is used by them as the interface standard for spectroscopy even when the instrument interface is RS-232c.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Host Computer Communication with Spectrometers for Color Measurements

ASTM E2214-02 说明和鉴定颜色测定仪性能的标准实施规程

In todayrsquo;commerce, instrument makers and instrument users must deal with a large array of bench-top and portable color-measuring instruments, many with different geometric and spectral characteristics. At the same time, manufacturers of colored goods are adopting quality management systems that require periodic verification of the performance of the instruments that are critical to the quality of the final product. The technology involved in optics and electro-optics has progressed greatly over the last decade. The result has been a generation of instruments that are both more affordable and higher in performance. What had been a tool for the research laboratory is now available to the retail point of sale, to manufacturing, to design and to corporate communications. New documentary standards have been published that encourage the use of colorimeters, spectrocolorimeters, and colorimetric spetrometers in applications previously dominated by visual expertise or by filter densitometers.8 Therefore, it is necessary to determine if an instrument is suitable to the application and to verify that an instrument or instruments are working within the required operating parameters. This practice provides descriptions of some common instrumental parameters that relate to the way an instrument will contribute to the quality and consistency of the production of colored goods. It also describes some of the material standards required to assess the performance of a color-measuring instrument and suggests some tests and test reports to aid in verifying the performance of the instrument relative to its intended application.1.1 This practice provides standard terms and procedures for describing and characterizing the performance of spectral and filter based instruments designed to measure and compute the colorimetric properties of materials and objects. It does not set the specifications but rather gives the format and process by which specifications can be determined, communicated and verified.1.2 This practice does not describe methods that are generally applicable to visible-range spectroscopic instruments used for analytical chemistry (UV-VIS spectrophotometers). ASTM Committee E13 on Molecular Spectroscopy and Chromatography includes such procedures in standards under their jurisdiction.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments

ASTM D2244-02 从仪器测定颜色一致性的方法计算色偏差和色公差的标准规范

1.1 This practice covers the calculation, from instrumentally measured color coordinates based on daylight illumination, of color tolerances and small color differences between opaque specimens such as painted panels, plastic plaques, or textile swatches. Where it is suspected that the specimens may be metameric, that is, possess different spectral curves though visually alike in color, Practice D 4086 should be used to verify instrumental results. The tolerances and differences determined by these procedures are expressed in terms of approximately uniform visual color perception in CIE 1976 CIELAB opponent-color space (1), CMC tolerance units (2), CIE94 tolerance units (3), the DIN99 color difference formula given in DIN 6176 (4), or the new CIEDE2000 color difference units (5). The color differences based on Hunter LH, aH, bH opponent-color space (6), or the Friele-MacAdam-Chickering (FMC-2) color space (7), are no longer recommended for industrial practice.1.2 For product specification, the purchaser and the seller shall agree upon the permissible color tolerance between test specimen and reference and the procedure for calculating the color tolerance. Each material and condition of use may require specific color tolerances because other appearance factors, (for example, specimen proximity, gloss, and texture), may affect the correlation between the magnitude of a measured color difference and its commercial acceptability.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

JJG 453-2002 标准色板检定规程

Verification Regulation of Colour Standard Plates