A41 数学 标准查询与下载

BS EN ISO 25178-605:2014 几何产品技术规范 (GPS). 表面结构: 平面式. 非接触 (点自动对焦探针) 仪器的标称特征

Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments

GOST R ISO 22514-7-2014 统计方法. 过程管理. 第7部分. 测量过程的能力

Statistical methods. Process management. Part 7. Capability of measurement processes

DIN ISO 3534-2:2013 统计学. 词汇和符号. 第2部分:应用统计学 (IEC/TS 3534-2-2006); 德文和英文文本

Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-2:2006); Text in German and English

EN ISO/TS 8062-2:2013 产品几何技术规范(GPS).模压部件的空间和几何公差.第2部分:规则

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules

BS ISO 3951-1:2013 计量检验的抽样规程.按接收质量限(AQL)检索的单一质量特性和单一AQL的逐批检验一次抽样计划的规范

Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

BS ISO 3951-2:2013 通过变量检验的取样程序. 按验收质量限制(AQL)检索的逐批检验独立质量特征的单次抽样计划的一般规范

Sampling procedures for inspection by variables. General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics

BS ISO 22514-2:2013 过程管理的统计方法.能力和性能.与时间有关的过程模型的过程能力和性能

Statistical methods in process management. Capability and performance. Process capability and performance of time-dependent process models

EN ISO/TS 15530-1:2013 产品几何技术规范(GPS).坐标测量机(CMM):衡量量度不确定性的技术.第1部分:概述和计量特征

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics

SL 620-2013 水利统计基础数据采集技术规范

本标准规定了水利统计基础数据采集的基本工作内容和技术要求,包括水利统计基础数据分类、内容与来源、搜集方法、质量控制与管理。本标准适用于水利和相关单位组织实施的基础数据采集活动。

Specification on water-related statistical data collection

IEC 61710:2013 幂律模型.拟合优度检验和估算方法

This International Standard specifies procedures to estimate the parameters of the power law model, to provide confidence intervals for the failure intensity, to provide prediction intervals for the times to future failures, and to test the goodness-of-fit of the power law model to data from repairable items. It is assumed that the time to failure data have been collected from an item, or some identical items operating under the same conditions (e.g. environment and load).

Power law model.Goodness-of-fit tests and estimation methods

BS ISO 3534-3:2013 统计学.术语和符号.实验设计

Statistics. Vocabulary and symbols. Design of experiments

BS ISO 7870-2:2013 控制图.常规控制图

Control charts. Shewhart control charts

ISO 7870-2:2013 控制图.第2部分:休哈特(Shewhart)控制图

This International Standard establishes a guide to the use and understanding of the Shewhart control chart approach to the methods for statistical control of a process. This International Standard is limited to the treatment of statistical process control methods using only the Shewhart system of charts. Some supplementary material that is consistent with the Shewhart approach, such as the use of warning limits, analysis of trend patterns and process capability is briefly introduced. There are, however, several other types of control chart procedures, a general description of which can be found in ISO 7870-1.

Control charts - Part 2: Shewhart control charts

BS ISO 22514-6:2013 过程管理的统计方法.因循多元正态分布特征描述用加工能力统计

Statistical methods in process management. Capability and performance. Process capability statistics for characteristics following a multivariate normal distribution

ISO 22514-6:2013 过程管理的统计方法.能力和性能.第6部分:因循多元正态分布特征描述用加工能力统计

This part of ISO 22514 provides methods for calculating performance and capability statistics for process or product quantities where it is necessary or beneficial to consider a family of singular quantities in relation to each other. The methods provided here mostly are designed to describe quantities that follow a bivariate normal distribution. NOTE In principle, this part of ISO 22514 can be used for multivariate cases. This part of ISO 22514 does not offer an evaluation of the different provided methods with respect to different situations of possible application of each method. For the current state, the selection of one preferable method might be done following the users preferences. The purpose is to give definitions for different approaches of index calculation for performance and capability in the case of a multiple process or product quantity description.

Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution

NF X06-075-7:2013 过程管理的统计方法. 能力和性能. 第7部分: 测量过程的能力

Statistical methods in process management - Capability and performance - Part 7: capability of measurement processes

ANSI/ASTM E2586:2013 计算和基本统计用实施规程

Practice for Calculating and Using Basic Statistics

ISO 17369:2013 统计数据和元数据交换(SDMX)

Statistical data and metadata exchange (SDMX)

ISO 3534-3:2013 统计学.术语和符号.第3部分:试验设计

Statistics-Vocabulary and symbols-Part 3:Design of experiments

KS A ISO 17:2012 优先数及优先数系的使用指南

이 표준은 표준수와 표준수 수열의 사용에 대한 지침이다.

Guide to the use of preferred numbers and series of preferred numbers