A53 力学计量 标准查询与下载



共找到 484 条与 力学计量 相关的标准,共 33

Atomic gravimeter performance requirements and test methods

ICS
17.100
CCS
A53
发布
2024-03-15
实施
2024-10-01

Non-self-indicating instrument

ICS
17.100
CCS
A53
发布
2019-12-31
实施
2020-07-01 00:00:00.0

Non self indicating instruments

ICS
CCS
A53
发布
2019-12-31
实施
2020-07-01

本标准规定了汽车用液化天然气加气机(以下简称加气机)的范围、规范性引用文件、术语和定义、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于汽车用液化天然气加气机的设计、制造及验收。

Liquefied natural gas dispenser for vehicle

ICS
17.120
CCS
A53
发布
2018-05-14
实施
2018-12-01

本标准规定了重力式自动装料衡器的术语、产品型号、要求、检验方法和规则、标志、包装、运输和贮存。 本标准还为以溯源的方式评价重力式自动装料衡器的计量特性或技术特性,为其提供标准化的要求和试验程序及表格。 本标准适用于通过自动称量使单个或多个载荷装料达到预定质量的重力式自动装料衡器。重力式自动装料衡器在本标准中简称装料衡器。 本标准没有限制装料衡器的最大秤量或最小称量。另外也可以要求装料衡器满足其他国家标准中规定的某些要求。例如,当装料衡器在正常情况下采用非自动模式时,应满足非自动衡器相关标准要求;对于装料小于或等于25kg的情况,应满足预包装商品含量相关标准的要求。

Automatic gravimetric filling instruments

ICS
17.100
CCS
A53
发布
2011-12-30
实施
2012-07-01

本标准规定了非自行指示秤(以下简称“秤”)的定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。

Non-self-indicating instrument

ICS
17.100
CCS
A53
发布
2002-03-05
实施
2002-09-01

本标准规定了振动与冲击传感器的灵敏度温度响应比较法测试的技术要求和方法。 本标准适用于直线振动和冲击传感器。

Methods for calibration of vibration and shock pick-ups. Testing of temperature response by comparison

ICS
17.160
CCS
A53
发布
1995-07-12
实施
1996-05-01

本标准规定了振动与冲击传感器的瞬变温度灵敏度的测试技术要求和方法。 本标准适用于压电式振动和冲击传感器。

Methods for calibration of vibration and shock pick-ups. Testing of transient temperature sensitivity

ICS
17.160
CCS
A53
发布
1995-07-12
实施
1996-05-01

本标准规定了振动与冲击传感器二次振动校准的基本要求、所使用的仪器设备及操作方法。 本标准适用于直线运动型工作传感器,其适用范围如下: 频率范围:20~5000Hz。 动态范围(视振动频率而定): 位移:0.1μm~10mm; 速度:1mm/s~10m/s; 加速度:10~1000m/s。 误差限: 对于位移和速度传感器:(20~1000Hz)为读数的±4%; 对于加速度传感器:(20~1000Hz)为读数的士2%, (20~2000Hz)为读数的±3%, (20~5000Hz)为读数的±5%。

Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation

ICS
17.160
CCS
A53
发布
1992-11-05
实施
1993-10-01

本标准规定了对测量旋转与往复机器振动烈度仪器的要求。 本标准适用于根据GB6075对旋转或往复机器的振动烈度进行测量。

Requirements for instruments for measuring vibration severity

ICS
17.160
CCS
A53
发布
1992-11-05
实施
1993-10-01

General technical requirements for dynamic loader electronic scales

ICS
17.100
CCS
A53
发布
2021-07-02
实施
2021-09-02

Application procedures for drones in water gauge weighing

ICS
17.060
CCS
A53
发布
2021-06-18
实施
2022-01-01

Belt weighers -- Part 1: Metrological and technical requirements (Amendment 1)

ICS
53.040.10
CCS
A53
发布
2021-03-22
实施

Belt weighers -- Part 1: Metrological and technical requirements

ICS
53.040.10
CCS
A53
发布
2021-03-22
实施

This document specifies a calibration method for mechanical type, electromagnetic type and acoustic type hydrometric current-meters used for point velocity measurement of flowing water. The method requires towing the instrument through still water in a straight open tank. It includes measuring apparatus, the calibration procedure, the method of presenting the results and the uncertainties associated with the method.

Hydrometry - Calibration of current-meters in straight open tanks

ICS
17.120.20
CCS
A53
发布
2021-01-00
实施

Farmer's Market Fair Scale Equipment and Management Specifications

ICS
17.060
CCS
A53
发布
2018-03-06
实施
2018-05-06

本标准规定了除冰防冰液折射率的测定方法、报告及偏差要求。 本标准适用于实验室测定除冰防冰液在20 ℃时的折射率。

Test method for refractive index of deicing/anti-icing fluid

ICS
17.060
CCS
A53
发布
2017-12-16
实施
2018-03-01

本标准规定了增稠型飞机除冰防冰液(以下简称防冰液)粘度的实验室测定方法及报告要求。 本标准适用于在实验室使用Brookfield LV系列旋转粘度计测定符合GB/T 20857要求的防冰液的粘度。

Viscosity test of thickened aircraft deicing/anti-icing fluids with the Brookfield LV viscometer

ICS
17.060
CCS
A53
发布
2017-12-16
实施
2018-03-01

Regulations for weight assessment of cargo carried in containers for import and export commodities Part 2: Weight assessment of bulk cargo carried in containers

ICS
17.060
CCS
A53
发布
2017-11-07
实施
2018-06-01

Regulations for Weight Appraisal of Imported and Exported Commodities Part 3: Automatic Measurement of Liquid Level on Ships

ICS
17.060
CCS
A53
发布
2017-08-29
实施
2018-04-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号