A59 声学计量 标准查询与下载



共找到 512 条与 声学计量 相关的标准,共 35

GB/T 3785的本部分规定了设计符合IEC 61672-1中要求的1级和2级规范的时间计权声级计、积分平均声级计和积分声级计的周期试验程序。其目的是保证所有实验室采用一致的方法进行周期试验。 周期试验的目的是为了向用户证明,对于限定的一组关键试验和在进行试验的环境条件下,声级计的性能满足IEC 61672-1适用的规范。 本部分中试验的范围是慎重有意的限制到周期试验所必需的最小范围。 本部分适用于生产商宣称符合IEC 61672-1第2版规范的声级计。本部分中周期试验也适用于其型号已经或者还未由独立试验机构按照IEC 61672-2第2版试验程序进行型式批准试验的声级计。 由于周期试验的范围有限,如果不能公开获得型式评价的证据,即便周期试验的结果符合IEC 61672-3本版本的所有适用要求,也不能做出符合IEC 61672-1规范的总结论。

Electroacoustics.Sound level meters.Part 3:Periodic tests

ICS
17.140.50
CCS
A59
发布
2018-06-07
实施
2019-01-01

GB/T 20441的本部分规定了确定实验室标准传声器复数声压灵敏度的原级方法,为声压测量建立一个具有可复现性的准确依据。 本部分适用于满足GB/T 20441.1—2010要求的实验室标准传声器和具有相同尺寸的其他类型电容传声器。 本部分中所有的量均以国际单位制单位表示。

Electroacoustics.Measurement microphones.Part 2:Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

ICS
17.140.50
CCS
A59
发布
2018-06-07
实施
2019-01-01

Acoustics—Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices—Part 2: Structure-borne vibration measurements

ICS
17.140
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Specification of test tracks for measuring noise emitted by road vehicles and their tyres

ICS
17.140
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices—Part 1: Airborne noise measurement

ICS
17.140
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Procedures for determination of transmission loss, flow noise and total pressure loss coefficient for arrayed element dissipative silencers—Equivalent measurement

ICS
91.120.20
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Audiometric test methods—Part 1: Pure-tone air and bone conduction audiometry

ICS
17.140
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Measurement of room acoustic parameters—Part 1: Performance spaces

ICS
91.120.20
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

GB/T 36075的本部分规定了普通房间混响时间的测量方法、测量步骤、测量设备、测点数量、结果评价和测试报告式样。 测量结果可用于声源声压级测量和隔声测量等声学测量中修正项的计算,并可用于与房间的混响时间设计要求进行比较。

Acoustics—Measurement of room acoustic parameters—Part 2: Reverberation time in ordinary rooms

ICS
91.120.20
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Measurement of room acoustic parameters—Part 3: Open plan offices

ICS
91.120.20
CCS
A59
发布
2018-03-15
实施
2018-10-01 00:00:00.0

Acoustics—Audiometric test methods—Part 3: Speech audiometry

ICS
17.140
CCS
A59
发布
2017-12-29
实施
2018-04-01 00:00:00.0

Acoustics—Determination of dynamic stiffness—Part 1: Materials used under floating floors in dwellings

ICS
91.120.20
CCS
A59
发布
2017-12-29
实施
2018-04-01 00:00:00.0

Acoustics—Measurements of sound pressure level emitted by stationary road vehicles

ICS
17.140
CCS
A59
发布
2017-12-29
实施
2018-04-01 00:00:00.0

1.1 概述本标准规定了在满足给定条件的测试环境中,根据包围噪声源(机械或设备)表面上测得的声压级来确定噪声源声功率级或声能量级的方法。 利用这些测量可计算出噪声源所产生的A计权声功率级(或猝发声和瞬态噪声的A计权声能量级)。 注:不同形状测量面会对给定的同一噪声源得出不同声功率级估值。 GB/T19052—2003 中相应的测试规程给出了测量面选取的详细资料。 1.2 噪声及噪声源种类

Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane

ICS
17.140
CCS
A59
发布
2017-12-29
实施
2018-04-01 00:00:00.0

Acoustics—Measurement of sound insulation in buildings and of building elements—Part 18: Laboratory measurement of sound generated by rainfall on building elements

ICS
91.120.30
CCS
A59
发布
2017-12-29
实施
2018-04-01 00:00:00.0

Electroacoustics—Measurement microphones—Part 6: Electrostatic actuators for determination of frequency response

ICS
17.140.50
CCS
A59
发布
2017-11-01
实施
2018-05-01 00:00:00.0

Sound system equipment—Part 16: Objective rating of speech intelligibility by speech transmission index

ICS
17.140;33.160
CCS
A59
发布
2017-11-01
实施
2018-05-01 00:00:00.0

Acoustics—Estimation of noise-induced hearing loss

ICS
17.140
CCS
A59
发布
2017-11-01
实施
2018-05-01 00:00:00.0

Acoustics—Test methods for the qualification of free-field environments

ICS
17.140.01
CCS
A59
发布
2017-11-01
实施
2018-05-01 00:00:00.0

Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion

ICS
17.140
CCS
A59
发布
2017-11-01
实施
2018-05-01 00:00:00.0



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号