A94 警用装备与器械 标准查询与下载

GA/T 172-2005 金属手铐

本标准规定了金属手铐的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于金属手铐。

Metallic handcuffs

UL 752-2005 防弹设备

1.1 These requirements cover materials, devices, and fixtures used to form bullet-resisting barriers which protect against robbery or holdup. 1.2 As used in these requirements, the term "bullet-resisting" signifies that protection is provided against complete penetration, passage of fragments of projectiles, or spalling (fragmentation) of the protective material to the degree that injury would be caused to a person standing directly behind the bullet-resisting barrier. 1.3 These requirements also cover electrically-operated equipment, such as teller's fixtures using electrically-driven deal trays or package passers, and intercommunication or other electrical equipment that is an integral part of the bullet-resisting product. 1.4 The term "product" as used in this standard refers to all bullet-resisting equipment or any part thereof covered by this standard unless specifically noted otherwise.

UL Standard for Safety Bullet-Resisting Equipment Eleventh Edition; Reprint with Revisions Through and Including December 21, 2006

ARMY MIL-DTL-43649 D-2005 12.26和34英寸直径货物降伞

This specification covers the requirements for three cargo parachute assemblies and the separate components thereof.

PARACHUTES, CARGO, 12, 26, AND 34 FOOT DIAMETER

KS B 6603-2005 萃取器组件

이 규격은 각종 장비 및 기계 부품의 볼트 제거에 사용되는 추출기 세트에 대하여 규정한다.

Extractor set

ASTM F2542-05(2012) 拘留和教养设施用通风格栅身体攻击的标准试验方法

A major concern for administration officials is security of barriers used in detention/correctional facilities. These test methods are designed to identify the security levels for ventilation grilles mounted within these barriers. The purpose of these tests is to approximate levels of abuse to which grilles will potentially be subjected in the field, and to provide assurance of protection to the public, facility administrative personnel, and inmates.1.1 These test methods cover requirements for simulated service tests and testing equipment for determining the performance characteristics of ventilation grilles used in secure areas, including detention and correctional facilities. The testing equipment provides for the setup and testing of specimen grilles and mounting systems. It is recognized that, in order to meet the intent of these test methods, ventilation grilles must be compatible with the level of performance require by Test Methods F2322. 1.2 It is the intent of these test methods to ensure that security ventilation grilles meet minimum performance levels to control the passage of unauthorized materials into secure areas, to confine inmates, to resist vandalism, and to delay or frustrate escape, or both. It is also the responsibility of the user of these test methods to insure that the grille selected is appropriate, based on relevant regulatory, health, and safety concerns and requirements. Such concerns include, but are not limited to, injury and suicide avoidance. These test methods do not quantify such concerns. 1.3 Take care to provide access to return and exhaust ducts for cleaning as required by NFPA 90A. If access cannot be provided though an interstitial space behind walls or ceiling, the use of filter grilles needs to be considered as an option. When filter grilles are provided, filters shall have a minimum UL-900 class 2 rating, and a filter replacement program needs to be in place at the facility. 1.4 Airflow performance shall be catalogued in accordance with ASHRAE 70–91. Manufacturer’s catalog data must include grade level achieved. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

GA 524-2004 2004式警车汽车类外观制式涂装规范

本标准规定了公安2004式警车汽车类外观制式的涂装式样、涂装要素，涂装要求、试验方法 检“ 验规则。 本标准适用于公安2004式警车汽车类外观制式的涂装和检验。

2004 police car exterior standard painting specification

GA 525-2004 2004式警车摩托车类外观制式涂装规范

本标准规定了公安Zm4贰警牛靡托牛类外观制站的涂装贰样、 涂装力法、 涂装要水、 试验力法和 检验规则。 本标准适乒 于公安2004式警车摩托车类外观制式的涂装和检验。

2004 police car motorcycle exterior standard painting specification

GA 523-2004 警车外观制式涂装用定色漆

本标准规定了公安2004式警车外观制式涂装用定色漆的技术要求、试验方法、检验规则、标志、包装、贮存与处理等。 本标准适用于公安2004式警车外观制式的涂装用定色漆。

Fixation paint for police vehicle

GA 522-2004 警车车徽

本标准规定了公安2004式留车车徽的技术要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于以柔韧性反光膜材料，采用丝网印刷制作的，用于粘贴在公安2004式警车上的警车车徽的生产、检验、验收与订购。

Emblem for police vehicle

GA 510-2004 警用抓捕网

本标准规定了警用抓捕网的术语和定义、命名、要求、检验方法、检验规则、标志、包装、运输和储存。 本标准适用于使用51式7.62 mm手枪空包弹为动力的警用抓捕网。

Catching net for police

DLA FF-S-2738 A (1)-2004 反偷盗封条

The General Services Administration has authorized the use of this amenement that forms a part of FF-S-2738A, dated 30 MARCH 1999 by all federal agencies.

SEALS, ANTIPILFERAGE

ARMY MIL-DTL-14652 B ADMIN NOTICE 1-2004 陆军和空军机构徽章及服役部门绣花徽章一般规格

The specification identifier at the top of page 2 is incorrect. Page 2 specification identifier should read "MIL-DTL-14652B.

INSIGNIA, EMBROIDERED, ORGANIZATIONAL, BADGES, AND BRANCH OF SERVICE, ARMY AND AIR FORCE, GENERAL SPECIFICATION FOR

GA 466-2004 警服.训练服

本标准规定了警察训练服的要求、检验及检验规则、标志、包装、运输及贮存。 本标准适用于警察训练服生产、检验和贸易等。

Police uniform-Training suit

DLA A-A-59554-2004 可折叠拆卸的回收散装系统

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

CORRUGATED COLLAPSIBLE REUSABLE BULK PACKING SYSTEM

ASTM F2456-04(2009) 防止青少年使用的武器箱(YRFCs)的标准规范,

1.1 This specification covers youth-resistant firearms containers (YRFCs), which are lockable containers that completely contain firearm(s) (2.2.1) to prevent unauthorized access to firearm(s). This specification: 1.1.1 Establishes a moderate security level for firearms storage intended to prevent youths from gaining unauthorized access to firearm(s); and 1.1.2 Establishes a consistent standard for testing and compliance certification. 1.2 This specification contains functional, operational, safety, and performance requirements for YRFCs. 1.3 This specification does not apply to transport-type weapons carrying cases (WCCs), full-sized light gun cabinets (LGCs), gun safes (GSs), or high security gun safes (HSGSs). 1.4 This specification is intended to prevent unauthorized access to children up to and including age eleven. 1.5 This specification is not intended to: 1.5.1 Ensure theft resistance of the YRFC or the contents of the YRFC; or 1.5.2 Ensure quick access to a firearm or assure long-term reliability of the YRFC operation to provide quick access to a firearm. 1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.7 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Youth-Resistant Firearms Containers (YRFCs)

GA 446-2003 警服.反光背心

本标准规定了警用反光背心的要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于警用反光背心的生产、检验和贸易等。

Police uniform.Retroreflective vest

GA 447-2003 警服材料.精梳涤棉混纺格子布

本标准规定了99式警服用精梳涤棉混纺格子布的要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于99式警服用精梳涤棉混纺格子布的生产、检验和贸易等。

Material for police uniform.Combed cotton/polyester checked fabric

GA 443-2003 电子脚扣

本标准规定了电子脚扣的技术要求、试验方法、检验规则、标志、包装、贮存及运输。 本标准适用于电子脚扣的设计、生产、检验和政府主管部门对产品的规范化管理。

Electrical footrope

KS B 6604-2003 喷嘴(灭火水龙带用)

이 규격은 소방 호스에 사용하는 노즐에 대하여 규정한다.

Nozzle(Fire hose water)

GA/T 421-2003 穿刺放气式路障

本标准规定了穿刺放气式路障的定义、产品分类与命名、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于穿刺放气式路障。

Punctured deflatable road-block