B69 木材加工材 标准查询与下载

BS EN 1910:2013 木材、拼花地板和木材镶板及覆层.尺寸稳定性测定

Wood flooring and wood panelling and cladding. Determination of dimensional stability

BS EN 1316-1:2012 硬圆木.定性分类.橡树和山毛榉

Hardwood round timber. Qualitative classification. Oak and beech

NF B57-150*NF ISO 17727:2013 软木塞.静态葡萄酒用软木塞.软木塞质量控制用抽样方案

Cork - Cork stoppers for still wine - Sampling plan for the quality control of cork stoppers

LY/T 1504-2013 脚手杆

本标准规定了脚手杆的术语和定义、要求、抽样及检验方法和材积计算。本标准适用于建筑等行业施工搭架使用的木制脚手杆的生产和流通领域。

Scaffolding pole

LY/T 2147-2013 木材除湿干燥工艺规程

本标准规定了木材除湿干燥作业中含水率检验板、推荐基准、干燥前设备检查、干燥过程管理、质量检验基本守则。本标准适用于锯材以湿空气为干燥介质的木材除湿干燥。

Technology rules of wood dehumidification drying

LY/T 2148-2013 脱脂松木锯材

本标准规定了脱脂松木锯材的术语和定义、质量要求、试验方法、检验规则和锯材保存。本标准适用于木材加工行业脱脂松木锯材、脱脂松木家具生产、流通、销售及消费领域中的质量监督及检验。本标准适用于松科中的松属与落叶松属木材的脱脂质量检验与评定。

Deresination pine sawn timber

LY/T 2142-2013 喷播用木质纤维

本标准规定了喷播用木质纤维的术语和定义、分类和符号、要求、检验方法、检验规则及标志、包装、运输和贮存。本标准适用于绿化、生态恢复及水土保持工程中以木材为原料经热磨等方法制备的喷播用纤维产品。

Wood fiber for hydroseeding

LY/T 2143-2013 实木衣架

本标准规定了实木衣架的术语和定义、分类、技术要求、检验方法、检验规则以及标识、包装、贮存和运输。本标准适用于实木衣架生产及流通贸易。

Solid wood hanger

LY/T 2145-2013 梳篦

本标准规定了梳篦的术语和定义、分类、要求、试验方法、检验规则以及包装、标志、运输和贮存等。本标准适用于以木、竹材料为主体制成的梳篦。

Comb

EN 13442:2013 木地板和木镶板及覆盖层抗化学试剂腐蚀性的测定

This European Standard specifies a test method to determine the resistance of the surface of an element of wood flooring, panelling and cladding, to a predetermined list of chemical agents they may be exposed to during their service life.

Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents

EN 335:2013 木材和木制品的耐久性.使用等级:实心木材及木质产品的定义和应用

This European Standard is applicable to solid wood and wood-based products. This European Standard defines five use classes that represent different service situations to which wood and wood-based products can be exposed. This standard also indicates the biological agents relevant to each situation. A use class is not a performance class and does not give guidance for how long wood and wood-based product will last in service.

Durability of wood and wood-based products - Use classes: definitions@ application to solid wood and wood-based products

BS ISO 16420:2013 软木塞.无气葡萄酒用软木塞.机械和物理规格

Cork. Cork stoppers for still wines. Mechanical and physical specifications

BS ISO 16419:2013 软木塞. 无汽葡萄酒用软木塞的可视异常现象

Cork. Visual anomalies of cork stoppers for still wines

ISO 16420:2013 软木塞.无气葡萄酒用软木塞.机械和物理规格

Cork - Cork stoppers for still wines - Mechanical and physical specifications

DIN CEN/TR 16420:2013 经处理的木材样品中丙环唑分析的分析方法.德文版本CEN/TR 16420-2012

Analytical Method fot the Analysis of Propiconazole in treated Wood Samples; German version CEN/TR 16420:2012

ISO 16419:2013 软木.无汽葡萄汁酒用软木塞的可视异常现象

This International Standard applies to both — semi-elaborated natural cork stoppers and colmated natural cork stoppers at the definitive dimensions stage, and — finished natural cork stoppers and colmated natural cork stoppers ready to use. It describes the anomalies of cork stoppers that can be detected by visual examination of the manufacturer or the end-user. These anomalies, according to their size, can have functional or not functional consequences being able to alter, more or less, the cork stoppers’ sealing capacity. On the basis of a common sampling example, this International Standard proposes for all these anomalies some specifications for stoppers.

Cork - Visual anomalies of cork stoppers for still wines

ASTM D3201/D3201M-13 阻燃木材和木制品吸湿特性的标准试验方法

4.1 The hygroscopic properties of wood and wood-based products treated with fire-retardant chemicals are often greater than for untreated products. This is particularly true at the higher relative humidity conditions. This higher hygroscopicity sometimes is the cause for staining, decay, poor paint adhesion, and migration and exuding of chemicals and moisture at the high humidities. Corrosion of metal fasteners sometimes also occurs. 4.2 The results obtained with this standard are important in identifying treatments with low hygroscopic properties. 4.3 Results can be useful in determining exposure limitations in service for specific treated products. 4.4 Building codes and other specifications for fire-retardant-treated wood for interior use include requirements based on this test method. 1.1 This test method prescribes the procedure for determining the hygroscopicity of fire retardant treated wood products by determining the moisture content of fire-retardant-treated wood and wood-based product specimens after exposure to a test condition of 92 ± 28201;% relative humidity at 818201;±8201;4°F [27 ± 2°C]. 1.2 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this test method. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

ASTM D4446/D4446M-13 暴露在液态水环境下未经处理木材的防水配方和微分润胀抗溶胀性效力标准试验方法

3.1 This test method is useful in determining the relative anti-swelling efficiency of various water-repellent formulations when applied to wood. It is the initial means of estimating the ability of water-repellent treated wood to perform satisfactorily when exposed to liquid water environments. 3.2 The swelling differences of untreated wood species when subjected to water immersion can also be determined by this test method. 3.3 This method is a basic screening test and thus provides an initial determination of the anti-swelling efficiency of water repellents. It is a qualitative method designed to provide a reproducible means of establishing: (1) the anti-swelling efficiency of water-repellent formulations, and (2) the relative swelling of untreated wood species when both are exposed to liquid water environments. 1.1 This test method is designed to evaluate the effectiveness of water-repellent compositions for retarding dimensional changes in coated wood submerged in water. It can also be used to measure the differential swelling of untreated wood when exposed to liquid water environments. The compositions tested are designed to be mixed until uniform and applied by brush, roller, dip or spray to an exterior wood surface. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

ASTM D5266-13 估算胶粘连接时对木材破坏百分率的标准实施规程

4.1 An estimate of wood failure is one of the principal means for determining the quality of an adhesively bonded wood joint. 4.2 When evaluated after a water soaking, water soaking and drying, or boiling and drying, the percentage of estimated wood failure is an important criterion for qualifying adhesives for use in plywood, laminated structural timber, adhesively bonded wood products and for daily quality control of the processes for manufacturing various adhesively bonded wood products including but not limited to plywood and laminated timbers. Standards that use the percentage of wood failure are included in Section 2. 4.3 In plywood manufactured from North American softwood species, the percentage of wood failure of Test Method D906 specimens, tested wet after either a vacuum-pressure soak-dry or boil-dry treatment, correlates with the percentage of panels that delaminate in outdoor exposure without protection.7 4.4 Similar correlations for other products have not been published. 1.1 This practice provides procedures for estimating the percentage of wood failure that occurs in plywood-shear, block-shear, finger joint test specimens, or any other bondline involving wood. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

ANSI/ASTM E2579:2013 试样制备及安装木制品以评估表面燃烧特性的实施规程

Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics