B69 木材加工材 标准查询与下载
共找到 776 条与 木材加工材 相关的标准，共 52 页
本标准规定了铁路货车用锯材的要求、抽样方法、检验方法和材积计量。 本标准适用于铁路货车用锯材。
Sawn timber for railway wagon
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
Lumber for musical instrument-Lumber for piano
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了应用近红外光谱分析技术对木材进行定性分析的方法。 本标准适用于木材性质的快速定性分析。 本标准不适用于仲裁检验。
Standard method for near infrared qualitative analysis of Wood
- ICS
- 79.010
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
Square timber for interior decoration
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了钢琴锯材的技术要求、检验方法、尺寸与缺陷检量、材积计量、抽样与判定方法、保管、包装与验收。 本标准适用于钢琴锯材的生产与销售。
Lumber for musical instrument.Lumber for piano
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了室内装修用木方的技术要求、检验方法和材积计量。 本标准适用于未经指接的室内装修用木方的生产、流通和使用领域。
Square timber for interior decoration
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了机台木技术要求、缺陷允许限度、抽样方法、尺寸与缺陷检量和材积计量。 本标准适用于油田、矿山、地质部门钻机垫木的专用材。
Sawn timber for drill frame
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了载重汽车用锯材的术语和定义、要求、抽样方法、检验方法和材积计量。 本标准适用于载重汽车用梁垫木、底板和栏板条。
Sawn timber for truck
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了实木地板坯料的术语和定义、适用木材、要求、检验方法、检验规则及包装、标志、运输、贮存的要求。本标准适用于木材经干燥处理后制成的实木地板坯料。
Blanks for soild wood flooring
- ICS
- 79.080
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了毛边锯材的术语和定义、要求、抽样、检验方法及材积计算。 本标准适用于毛边锯材的生产和流通。
Unedged sawn timber
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了棕榈藤藤材缺陷的分类、术语和图谱(参见附录A)。 本标准适用于藤材(包括原藤、刨光藤、磨光藤、抛光藤和大圆芯)的生产、贸易和加工。
Defects in rattan cane
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
本标准规定了木板皮的技术要求、缺陷允许限度、检量要求及材积计算。 本标准适用于以木材为原料的造纸、纤维用木板皮。
Wood slab
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02-23
- 实施
- 2012-07-01
Fundamental deviations and tolerance zones for wood working and wood processing
- ICS
- 79.020
- CCS
- B69
- 发布
- 2012-02-01
- 实施
This International Standard specifies methods for the extensive and limited sampling of wood, conditioning and preparation of test pieces. It also specifies the general requirements for physical and mechanical testing of small clear wood specimens. The sampling guidance provided in this International Standard can be applied for timber taken from either trees, logs, or pieces of ungraded/graded/presorted sawn timber for non-structural applications, such as furniture, windows, doors, etc., only.
Wood - Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
- ICS
- 79.040
- CCS
- B69
- 发布
- 2012-02
- 实施
1.1 This test method provides a method for the collection of volatile organic compounds (VOC) that are emitted during the manufacture of engineered wood products using a laboratory environment designed to simulate a defined production process. The method is used for the determination of the amounts of methanol, formaldehyde, phenol and other VOC that may be emitted during conditions designed to simulate production such as hot pressing, the conditions of ???hot stacking??? and ???cool-down??? that occurs post-press. 1.2 The test method was originally developed to measure certain VOC from exterior plywood meeting Voluntary Product Standard PS 1???09 and structural composite lumber products such as laminated veneer lumber (LVL) meeting Specification D5456. Both of these product types are typically manufactured using phenol-formaldehyde resin based adhesives that meet Specification D2559. 1.3 The test method is suitable for many types of wood products bonded with adhesives. 1.4 This test method is specific for collecting VOC during simulated production of wood products and is not designed to determine general organic emissions from all indoor materials or sources. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Hazards.
Standard Test Method for ???Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
- ICS
- 13.040.30 (Workplace atmospheres)
- CCS
- B69
- 发布
- 2012
- 实施
1.1 This practice describes procedures for specimen preparation and mounting when testing wood products to assess flames spread and smoke development as surface burning characteristics using Test Method E84. 1.2 Testing is conducted with Test Method E84. 1.3 This practice does not provide pass/fail criteria that can be used as a regulatory tool. 1.4 Use the values stated in inch-pound units as the standard, in referee decisions. The values in the SI system of units are given in parentheses, for information only; see IEEE/ASTM8201;SI-10 for further details. 1.5 This fire standard cannot be used to provide quantitative measures. 1.6 Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests. Fire testing involves hazardous materials and equipment. This standard gives instructions on specimen preparation and mounting, but the fire-test-response method is given in Test Method E84. See also Section 10. 1.7 The text of this standard references notes and footnotes which provide explanatory materials. These notes and footnotes shall not be considered requirements of the standard. 1.8......
Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
- ICS
- 13.220.40 (Ignitability and burning behaviour of m
- CCS
- B69
- 发布
- 2012
- 实施
