B69 木材加工材 标准查询与下载

ASTM E2579-12 表面燃烧特性评估用木材制品的样品制备和安装的标准实施规程

1.1 This practice describes procedures for specimen preparation and mounting when testing wood products to assess flames spread and smoke development as surface burning characteristics using Test Method E84. 1.2 Testing is conducted with Test Method E84. 1.3 This practice does not provide pass/fail criteria that can be used as a regulatory tool. 1.4 Use the values stated in inch-pound units as the standard, in referee decisions. The values in the SI system of units are given in parentheses, for information only; see IEEE/ASTM8201;SI-10 for further details. 1.5 This fire standard cannot be used to provide quantitative measures. 1.6 Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests. Fire testing involves hazardous materials and equipment. This standard gives instructions on specimen preparation and mounting, but the fire-test-response method is given in Test Method E84. See also Section 10. 1.7 The text of this standard references notes and footnotes which provide explanatory materials. These notes and footnotes shall not be considered requirements of the standard. 1.8......

Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

ASTM D1037-12 木质纤维和碎料板材料性能评估的标准试验方法

These test methods cover small-specimen tests for wood-base fiber and particle panel materials that are made to provide: Data for comparing the mechanical and physical properties of various materials, Data for determining the influence on the basic properties of such factors as raw material and processing variables, post-treatments of panels, and environmental influences, and Data for manufacturing control, product research and development, and specification acceptance. Not all the tests outlined in these test methods may be necessary to evaluate any particular panel for any specified use. In each instance, therefore, it will be necessary to determine which tests shall be made.1.1 Part AGeneral Test Methods for Evaluating the Basic Properties of Wood-Base Fiber and Particle Panel Materials. These test methods cover the determination of the properties of wood-base fiber and particle panel materials that are produced as mat-formed panels such as particleboard, medium-density fiberboard, hardboard, and oriented strand board. Section Significance and Use3 Apparatus4 Test Specimens5 Moisture Content and Conditioning Requirements6 Accelerated Aging7 Size, Physical Properties and Appearance of Panels8 Static Bending9 Tension Parallel to Surface10 Tension Perpendicular to Surface11 Compression Parallel to Surface12 Fastener Holding Tests: Lateral Nail Resistance13 Nail Withdrawal14 Nail-Head Pull-Through15 Direct Screw Withdrawal16 Hardness17 Hardness Modulus18 Shear in the Plane of the Panel19 Glue-Line Shear (Block Type)20 Falling Ball Impact21 Abrasion Resistance by the U.S. Navy Wear Tester22 Moisture Tests: Water Absorption and Thickness Swelling23 Linear Expansion with Change in Moisture Content24 ......

Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

ASTM D3737-12 确定结构级胶合叠层木材的允许特性的标准实施规程

1.1 This practice covers the procedures for establishing allowable properties for structural glued laminated timber. Included are the allowable stresses for bending, tension and compression parallel to the grain, horizontal shear, compression perpendicular to the grain, and radial tension and compression in curved members. Also included are modulus of elasticity and modulus of rigidity. 1.2 This practice is limited to the calculation of allowable properties subject to the given procedures for the selection and arrangement of grades of lumber of the species considered. 1.3 Requirements for production, inspection and certification are not included, but in order to justify the allowable properties developed using procedures in this practice, manufacturers must conform to recognized manufacturing standards. Refer to ANSI/AITC8201;A190.1 and CSA8201;O122. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

ASTM D25-12 圆木桩的标准规格

1.1 This specification covers the physical characteristics of unused round timber piles to be used either treated or untreated. 1.2 This specification is not intended for preused piles unless the piles have the quality specified by this specification and design stresses equal to or greater than those derived from Method D2899. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Round Timber Piles

KS M ISO 8724:2011 软木装饰板.规范

이 표준은 내부 벽 덮개용 코르크 장식 패널의 특성에 대하여 규정한다.

Cork decorative panels-Specification

DIN EN 975-1:2011 锯成木材.硬木的外观等级.第1部分:橡木和榉木.德文版本EN 975-1-2009 + AC-2010

This European Standard specifies the rules determining the quality of appearance graded sawn timber. It describes various grades of temperate hardwood rough saw timber and regularized timber for which it lays down denominations and definitions. It also gives rules for composition and acceptance of batches.

Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech; German version EN 975-1:2009 + AC:2010

NF B53-649:2011 木地板和镶木地板及木镶板和覆盖层.几何特性的测定.

Wood flooring and wood panelling and cladding - Determination of geometrical characteristics.

DIN EN 13353:2011 实木板材(SWP).要求.德文版本EN 13353-2008+A1-2011

This European Standard specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is also given.

Solid wood panels (SWP) - Requirements; German version EN 13353:2008+A1:2011

LY/T 1974.1-2011 民族乐器锯材.第1部分：古琴用材

LY/T 1974的本部分规定了古琴用材的术语和定义、技术要求以及检验方法与材积计算。 本部分适用于古琴用材的生产及流通等领域。

Sawn timber for national music instrument.Part 1：Timber for ancient instrument

LY/T 1974.2-2011 民族乐器锯材.第2部分：琵琶用材

LY/T 1974的本部分规定了琵琶用材的术语和定义、技术要求以及检验方法与材积计算。 本部分适用于琵琶用材的生产及流通等领域。

Sawn timber for national music instrument.Part 2: Timber for pipa

LY/T 1184-2011 橡胶木锯材

本标准规定了橡胶木锯材的技术要求、检验方法、标识及运输与贮存。 本标准适用于橡胶木锯材的生产加工、流通和使用等领域。

Sawn timber of rubber wood

LY/T 1285-2011 船舶锯材

本标准规定了船舶锯材的技术要求、检验方法。 本标准适用于船舶制造与维修。

Swan timber for ship

KS F 3120-2011 行人自动门

이 표준은 동력으로 문이 열리는 보행자용 자동문의 요구 사항과 문짝의 작동 체계, 이와 관

Powered doors for pedestrians

DB34/T 1380-2011 林木采伐、加工剩余物和废弃木材回收利用规范

本标准规定了林木采伐、加工剩余物和废弃木材回收利用的术语和定义、基本原则、分类、回收、贮存和运输、回收利用、回收利用的安全、环保要求、回收物产品的标识及销售要求。本标准适用于废旧物资回收，木材加工和利用的管理与生产企业。

Specifications for the recycling and utilization of forest felling, processing residues and waste wood

DIN EN 14229:2011 结构木材.架空线用木杆;德文版本EN 14229-2010

This European Standard covers requirements for single untreated or preservative treated wood poles for overhead lines under cantilever or compression loading (it does not cover poles used as beams). It covers test methods, determination of characteristic values and methods of specifying durability and sizes. It also establishes principles for visual or machine grading. This European Standard applies to both softwood and hardwood poles. This European Standard specifies the evaluation of conformity requirements and the marking of wood poles. This European Standard does not specify wood poles treated aganist fire to improve their fire performance. This European Standard does not quantify the service life that may be expected from a wood pole.

Structural timber - Wood poles for overhead lines; German version EN 14229:2010

ASTM D4761-11 木材及木基结构材料机械性质的标准试验方法

These test methods provide procedures that are applicable under true field conditions, such as in a plant with specimens not at moisture equilibrium. The data established by these test methods can be used as follows: Develop strength and stiffness properties for the population represented by the material being tested (that is, individual grades, grade combinations, species, species groups, or any other defined, identifiable sample). Confirm the validity of strength and stiffness properties for the population represented by the material being tested. Investigate the effect of parameters that may influence the strength and stiffness properties of the material, such as moisture content, temperature, knot size and location, or slope of grain. The procedures chosen in accordance with these test methods shall be fully documented in the report to facilitate correlation with test results obtained through the use of traditional procedures, such as those set forth in Test Methods D198.1.1 These test methods cover the determination of the mechanical properties of stress-graded lumber and other wood-base structural material. 1.2 These test methods appear in the following order: Section Bending edge-wise6 Bending flat-wise: Center point loading7 Third point loading8 Axial strength in tension9 Axial strength in compression 10 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

ASTM D1666-11 进行木材和木基材料的机械切削试验的标准试验方法

Machining tests are made to determine the working qualities and characteristics of different species of wood and of different wood-base panel materials under a variety of machine operations such as are encountered in commercial manufacturing practice. The tests provide a systematic basis for comparing the behavior of different products with respect to woodworking machine operations and of evaluating their potential suitability for certain uses where these properties are of prime importance. 1.1 These test methods cover procedures for planing, routing/shaping, turning, mortising, boring, and sanding, all of which are common wood-working operations used in the manufacture of wood products. These tests apply, in different degrees, to two general classes of materials: 1.1.1 Wood in the form of lumber, and 1.1.2 Wood-base panel materials such as plywood and wood-base fiber and particle panels. 1.2 Because of the importance of planing, some of the variables that affect the results of this operation are explored with a view to determining optimum conditions. In most of the other tests, however, it is necessary to limit the work to one set of fairly typical commercial conditions in which all the different woods are treated alike. 1.3 Several factors enter into any complete appraisal of the machining properties of a given wood or wood-base panel. Quality of finished surface is recommended as the basis for evaluation of machining properties. Rate of dulling of cutting tools and power consumed in cutting are also important considerations but are beyond the scope of these test methods. 1.4 Although the methods presented include the results of progressive developments in the evaluation of machining properties, further improvements may be anticipated. For example, by present procedures, quality of the finished surface is evaluated by visual inspection, but as new mechanical or physical techniques become available that will afford improved precision of evaluation, they should be employed. 1.5 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials

DB45/T 700-2010 实木地板铺装规范

Specification for solid wood flooring

DIN EN 326-2:2010 木质板.取样,切割和检验.第2部分:初始类型试验和工厂产品控制.德文版本EN 326-2-2010

Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010

BS EN 14229:2010 木结构.架空线用木杆

This European Standard covers requirements for single untreated or preservative treated wood poles for overhead lines under cantilever or compression loading (it does not cover poles used as beams). It covers test methods, determination of characteristic values and methods of specifying durability and sizes. It also establishes principles for visual grading. This European Standard applies to both softwood and hardwood poles. This European Standard specifies the evaluation of conformity requirements and the marking of wood poles. This European Standard does not specify wood poles treated against fire to improve their fire performance. This European Standard does not quantify the service life that may be expected from a wood pole. NOTE The service life of a wood pole depends on its geographical location, the associated climate of its service environment and either the natural durability of the heartwood of the species selected, or the combination between selection of species, preservative type, and requirements of retention and any incised zones.

Structural timber. Wood poles for overhead lines