人造板标准-分析测试百科网

BS EN 14323:2017 木基板材.内部用三聚氰胺面板.试验方法

Wood-based panels. Melamine faced boards for interior uses. Test methods

ICS: 79.060.01
CCS: B70
发布: 2017-03-31
实施: 2017-03-31

DB34/T 2830-2017 棕榈藤复合装饰板

本标准规定了棕榈藤装饰板的术语和定义、分类、一般要求、检验规则、标志、包装、标志、贮存和运输。本标准适用于棕榈藤经过截断、开藤、开骨、拼贴等工艺加工而成的复合装饰板相关产品

Palm Rattan Composite Decorative Board

ICS: ICS 91.180
CCS: B70
发布: 2017-03-30
实施: 2017-04-30

ASTM D5456-17e1 评估结构性复合木制品的标准规格

1.1 This specification recognizes the complexity of structural glued products. Consequently, this specification covers both specific procedures and statements of intent that sampling and analysis must relate to the specific product. 1.2 This specification was developed in the light of currently manufactured products as defined in 3.2. Materials that do not conform to the definitions are beyond the scope of this specification. A brief discussion is found in Appendix X2. 1.3 Details of manufacturing procedures are beyond the scope of this specification. Note 1: There is some potential for manufacturing variables to affect the properties of members that are loaded for sustained periods of time. Users of this specification are advised to consider the commentary on this topic in Appendix X2. 1.4 This specification primarily considers end use in dry service conditions, such as with most protected framing members, where the average equilibrium moisture content for solid-sawn lumber is less than 168201;%. The conditioning environment of 6.3 is considered representative of such uses. 1.5 The performance of structural composite lumber is affected by wood species, wood element size and shape, and adhesive and production parameters. Therefore, products produced by each individual manufacturer shall be evaluated to determine their product properties, regardless of the similarity in characteristics to products produced by other manufacturers. Where a manufacturer produces product in more than one facility, each production facility shall be evaluated independently. For additional production facilities, any revisions to the full qualification program in accordance with this specification shall be approved by the independent qualifying agency. 1.6 This specification is intended to provide manufacturers, regulatory agencies, and end users with a means to evaluate a composite lumber product intended for use as a structural material. 1.7 This specification covers initial qualification sampling, mechanical and physical tests, analysis, and design value assignments. Requirements for a quality-control program and cumulative evaluations are included to ensure maintenance of allowable design values for the product. 1.8 This specification, or parts thereof, shall be applicable to structural composite lumber portions of manufactured structural components. 1.9 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.10 This standard does not purport to address all of

Standard Specification for Evaluation of Structural Composite Lumber Products

ICS: 79.060.01
CCS: B70
发布: 2017
实施

SN/T 4696-2016 纤维板和刨花板中邻苯二甲酸酯含量的测定

Determination of phthalate content in fiberboard and particleboard

ICS: 79-010
CCS: B70
发布: 2016-12-12
实施: 2017-07-01

SN/T 4691-2016 木材及木制品中氮丙啶的测定气相色谱法

Determination of aziridine in wood and wood products by gas chromatography

ICS: 71.040.40
CCS: B70
发布: 2016-12-12
实施: 2017-07-01

SN/T 4706-2016 运输包装纤维板箱制造结合处抗张强度试验方法

Test method for tensile strength of joints in fiberboard box manufacturing for transportation packaging

ICS: 55.020
CCS: B70
发布: 2016-12-12
实施: 2017-07-01

ISO 27769:2016 木基板材. 湿法纤维板

This document provides a classification matrix and related mandatory tests for two types of wet process fibreboard made from wood: softboards and hardboards and specifies the relevant manufacturing property requirements. NOTE 1 Wet process fibreboards are divided into three types: softboards, medium boards and hardboards. This document is not applicable to medium boards. NOTE 2 Fibreboards are broadly divided into two groups based on the manufacturing process, namely the dry-process group and the wet process group. This document is not applicable to dry-process fibreboards (see NOTE 3 The values listed in this document relate to product properties used to classify fibreboards into one of the different types. The values are not characteristic values to be used for design purposes. When fibreboard is classified as load-bearing and nominated for structural applications, characteristic strength and stiffness values are established based upon testing in accordance with ISO 16572 or equivalent ASTM or EN Standards. Alternatively, for specific load-bearing applications (e.g. walls, roofs, floors and I-joist webs), the load-bearing fibreboard would meet the specific performance requirements for that intended application.

Wood-based panels - Wet process fibreboard