C45 体外循环、人工脏器、假体装置 标准查询与下载

BS EN ISO 9999:2016 残疾人用辅助产品.分类和术语

Assistive products for persons with disability. Classification and terminology

ISO 7199:2016 心血管植入物和人造器官. 血液气体交换器(氧合器)

Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators)

ISO 21535:2007/Amd 1:2016 非有源外科植入物. 关节置换植入物. 髋关节置换植入物的特殊要求; 修改件1

Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants; Amendment 1

BS ISO 12505-2:2016 造口术辅助器用皮肤屏障. 试验方法. 湿完整性和胶粘强度

Skin barrier for ostomy aids. Test methods. Wet integrity and adhesive strength

ETSI EN 301 559-2016 短程设备(SRD);在2483.5 MHz至2500 MHz范围工作的低功耗活性医疗植入装置(LP-AMI)和相关外设(LP-AMI-P)的协调标准涵盖2014/53/EU欧盟指令第3.2条的基本要求(V2.1.1)

Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the 2 483@5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

BS ISO 14243-2:2016 用于手术的植入物 全膝关节假体的磨损 测量方法

Implants for surgery. Wear of total knee-joint prostheses. Methods of measurement

ISO/TR 19024:2016 心肺转流设备在心肺转流期间减少向患者输送气体微栓(GME)的能力评估

Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass

ISO 14243-2:2016 外科植入物.总的膝关节假肢的磨损.第2部分:测量方法

Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement

ISO 7206-2:2011/Amd 1:2016 外科植入体.部分与全部髋关节假体.第2部分:金属,陶瓷与塑料制成的关节面.修改件1

Implants for surgery - Partial and total hip joint prostheses - Part 2: Articulating surfaces made of metallic, ceramic and plastics materials; Amendment 1

ISO 18242:2016 心血管植入物和体外系统. 离心式血液泵

Cardiovascular implants and extracorporeal systems - Centrifugal blood pumps

BS ISO 15675:2016 心血管植入物和人造器官.心肺旁路系统.动脉血管路过滤器

Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters

BS ISO 18241:2016 心血管植入物和体外系统. 心肺旁路系统. 静脉气泡排除器

Cardiovascular implants and extracorporeal systems. Cardiopulmonary bypass systems. Venous bubble traps

BS ISO 18242:2016 心血管植入物和体外系统. 离心式血液泵

Cardiovascular implants and extracorporeal systems. Centrifugal blood pumps

BS ISO 15674:2016 心脏脉管植入物和人工器官.硬壳式心脏切开术/静脉存储系统(有/无过滤器)和软静脉储血袋

Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags

BS ISO 15676:2016 心血管植入物和人造器官. 心肺旁路和体外膜肺氧(ECMO)合用一次性管道套包的要求

Cardiovascular implants and artificial organs. Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)

ISO 15674:2016 心血管植入物和人造器官.心脏切开术/静脉硬体储血系统(具有/不具有过滤器)和软性静脉储血袋

Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags

ISO 7207-2:2011/Amd 1:2016 外科移值.部分与全部膝关节假体用组件.第2部分:金属,陶瓷与塑料材料所制的连接面.修改件1

Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials; Amendment 1

ISO 15675:2016 心血管植入物和人造器官.心肺旁路系统.动脉血管路过滤器

Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial blood line filters

ISO 18241:2016 心血管植入物和体外系统. 心肺旁路系统. 静脉气泡排除器

Cardiovascular implants and extracorporeal systems - Cardiopulmonary bypass systems - Venous bubble traps

BS EN ISO 22675:2016 假肢 踝足装置和足部单元的测试 要求及测试方法

Prosthetics. Testing of ankle-foot devices and foot units. Requirements and test methods