共找到 2139 条与 劳动防护用品 相关的标准,共 143 页
This part of ISO 16900 specifies the laboratory test method for determining the field of vision for a respiratory protective device (RPD).
Respiratory protective devices.Methods of test and test equipment.Part 11: Determination of field of vision
Personal protective equipment. Test methods for sunglasses and related eyewear
Dieser Teil von ISO 12312 gilt fur alle Sonnenbrillen ohne Korrektionswirkung (mit Nullglasern) sowie Aufsteckscheiben fur den allgemeinen Gebrauch einschlieslich dem Autofahren und dem Gebrauch im Strasenverkehr, bestimmt fur den Schutz gegen Sonnenstrahlung. Anhang A gibt Informationen uber die Verwendung von Sonnenschutzfiltern. Anforderungen an nicht montierte Sichtscheiben, die als Ersatz- oder Wechselfilter verwendet werden, sind in Anhang B gegeben. Dieser Teil von ISO 12312 gilt nicht fur: a) Augenschutz gegen die Strahlung kunstlicher Lichtquellen, z. B. von Solarien; b) Augenschutzgerate fur bestimmte Sportarten (z. B. Skibrillen oder andere Arten); c) Sonnenbrillen, die aus medizinischen Grunden zur Dampfung von Sonnenstrahlung verschrieben wurden; d) Produkte, die fur den direkten Blick in die Sonne, z. B. fur die Beobachtung einer ringformigen oder totalen Sonnenfinsternis, vorgesehen sind.
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use
This International Standard specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear. Other test methods may be used if proven to be equivalent.
Personal protective equipment.Test methods for sunglasses and related eyewear
Respiratory protective devices. Methods of test and test equipment. Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
Protective clothing. General requirements
Diese Internationale Norm legt allgemeine Leistungsanforderungen an die Ergonomie, die Unschadlichkeit, die Grosenbezeichnung, die Alterung, die Vertraglichkeit und die Kennzeichnung von Schutzkleidung sowie an die Informationen, die der Hersteller mit der Schutzkleidung mitliefern muss, fest. Diese Internationale Norm soll nur in Kombination mit anderen Normen angewendet werden, die Anforderungen an spezifische Schutzleistungen enthalten und nicht fur sich allein.
Protective clothing - General requirements
This International Standard specifies general performance requirements for ergonomics, innocuousness,size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. This International Standard is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis.
Protective clothing.General requirements
Specifications for Personal Protective Equipment
本标准规定了化工企业劳动防护用品的选用、基本配备以及使用和报废的管理。本标准适用于化工企业及其从业人员的劳动防护用品的选用及配备。
The selection and equipping of personal protective equipment in chemical manufacturers
ISO/TS16976 provides information on factors related to human physiology, ergonomics and performance for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). This part of ISO/TS 16976 gives guidance on the generic ergonomic factors related to RPD. It specifies for the writers of RPD performance standards principles relating to: —the biomechanical interaction between RPD and the human body; —the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. This part of ISO/TS 16976 does not cover requirements related to specific hazards for which RPD are designed.
Respiratory protective devices - Human factors - Part 8: Ergonomic factors
Motorcyclists' protective clothing against mechanical impact - Part 1: motorcyclists' limb joint impact protectors - Requirements and test methods
Respiratory protective devices. Methods of test and test equipment. Determination of particle filter penetration
High performance industrial helmets
High performance industrial helmets; German version EN 14052:2012+A1:2012
Industrial safety helmets; German version EN 397:2012+A1:2012
Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously; German version CEN/TS 16415:2013
Respiratory protective devices - Human factors - Part 7: Hearing and speech
This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab. The evaluations are for resistance to penetration of guards to the point of infringement of the Deflection Limiting Volume (DLV, see SAE J397). The performance requirements of a representative specimen (that is, within the manufacturer's specifications), are based on the performance of proven structures under laboratory evaluation procedures. The areas protec
Minimum Performance Criteria for Falling Object Guards for Excavators
Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012); German version EN ISO 15027-1:2012
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号