C83 灭火技术 标准查询与下载

EN 12416-1:2001+A2:2007 固定消防系统.粉末灭火系统.第1部分: 要求和测试组件的方法

This European Standard specifies requirements and test methods for materials, construction and performance of components intended for use in powder firefighting systems complying with prEN 12416-2:2000. The components covered are as follows: powder containers; expellant gas container assemblies; pressure regulators and gauges; actuators; main isolating valves and selector valves; nozzles. The components are suitable for powder firefighting systems for general use in buildings and other construction works. In areas with a risk of explosion, earthquake zones, extreme environmental conditions e. g. marine, offshore, mining or aircraft additional considerations apply. This standard covers components for use in powder extinguishing systems complying with prEN 12416-2:2000. It does not cover, for example, pipes and fittings which are covered by more general standards for which requirements and recommendations are given in prEN 12416-2:2000. Nor does it cover fire detectors or electrical control and indicating equipment.

Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components

EN 12416-2:2001+A1:2007 固定消防系统.粉末灭火系统.第2部分: 设计,施工和维护

This document specifies requirements and gives recommendations for the design, construction and maintenance of fixed fire extinguishing systems which discharge powder from a container, or centrally grouped containers, through nozzles by means of expellant gas in accordance with EN 12416-1 and the relevant part of EN 54 where required. This European standard covers systems which are suitable for general use in buildings and other construction works as well as outdoor hazards. This standard does not cover systems with permanently pressurized containers and pre-engineered systems up to 150 kg of the extinguishing media quantity, powder hose lines and monitor systems, nor areas with a risk of explosion, earthquake zones or extreme environmental conditions e. g. marine, offshore, mining or aircraft. This European standard does not apply to systems where there is a risk of class "D" fires according to EN 2.

Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance

ANSI/NFPA 1451-2006 消防车辆操作培训计划

This standard shall contain the minimum requirements for a fire service vehicle operations training program.This standard shall outline the development of a written training program, including the organizational procedures for training, vehicle maintenance, and identifying equipment deficiencies; and for design, financing, and other areas. The knowledge and skills required of safety, training, maintenance, and administrative officers charged with developing and implementing the operations training program shall also be outlined within this standard.

Fire Service Vehicle Operations Training Program

ISO 21927-2:2006 烟和热控制系统.第2部分:烟和热的自然排放通风机规范

This part of ISO 21927 specifies requirements and gives test methods for natural smoke- and heat-exhaust ventilators that are intended to be installed in a roof and/or wall as a component of a natural smoke- and heatexhaust system.

Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators

ISO 21927-3:2006 烟和热控制系统.第3部分:烟和热的动力排放通风机规范

This part of ISO 21927 specifies requirements and gives methods for testing powered smoke- and heat-exhaust ventilators that are intended to be installed as part of a powered smoke- and heat-exhaust ventilation system. It also provides a procedure for approving a range of powered smoke- and heat-exhaust ventilators and their motors, from a limited number of tests.

Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators

GA/T 636-2006 气体灭火剂的毒性试验和评价方法

本标准规定了气体灭火剂的自然毒性与火场毒性的试验方法、评价方法、检验与抽样、试验报告。 本标准适用于气体灭火剂。气雾溶胶类灭火剂可参照执行。

Test and evaluation method for the toxicity of gaseous fire-extinguishing agents

ASHRAE QC-06-041-2006 燃烧速度1,1-二氟甲烷(R-152a)

Burning Velocity of 1, 1-diflurorethane (R-152a)

Burning Velocity of 1, 1-diflurorethane (R-152a)

ANSI/NFPA 1404-2006 消防部门自给式呼吸器设备规划

Contains minimum requirements for a fire service respiratory protection program. These requirements are applicable to organizations providing fire suppression, fire training, rescue and respiratory protection equipment training, and other emergency services including public, military, and private fire departments and fire brigades.

Fire Department Self-Contained Breathing Apparatus Program

DIN 14097-3:2005 消防队训练设备.第3部分:木材着火时消防队训练设备

The document enables architects, designers, manufacturers, fire brigades and administrations to design appropriately wood fired fire brigade training facilities for training the members of fire brigades in fire fighting and to manufacture and operate this facilities in compliance to safety regulations.#,,#

Fire brigade training facilities - Part 3: Wood fired fire brigade training facilities

DIN 14097-1:2005 消防队训练设备.第1部分:一般要求

The document enables architects, designers, manufacturers, fire brigades and administrations to design appropriately fire brigade training facilities for training the members of fire brigades in fire fighting and to manufacture and operate this facilities in compliance to safety regulations.#,,#

Fire brigade training facilities - Part 1: General requirements

DIN 14097-2:2005 消防队训练设施.第2部分:燃气模拟设备

This standard applies to gas-fuelled fire simulation devices and specifies requirements for the design, installatiion in training facilities, and operation of such devices.

Fire fighter training facilities - Part 2: Gas-fuelled simulation devices

DIN 14097-4:2005 消防队训练设备.第4部分:消防训练房

This standard spplies to firefighter training houses.

Firefighter training facilities - Part 4: Firefighter training houses

DB44/ 251-2005 细水雾灭火系统及零部件性能要求及试验方法

本标准规定了细水雾灭火系统分类与基本参数、性能要求、试验方法、检验规则、标志、包装、运输存和使用说明书编写要求。本标准适用于细水雾灭火系统及其零部件。

Performance Requirements and Method of Test for Water Mist Fire Extinguishing Systems and Components

GA 534-2005 脉冲气压喷雾水枪通用技术条件

本标准规定了脉冲气压喷雾水枪的术语和定义、分类与型号、技术要求、试验方法、检验规则、标志、包装、运输、贮存和使用说明书等。 本标准适用于脉冲气压喷雾水枪。

General specifications for impulse air pressure spray gun

ASHRAE OR-05-9-3-2005 以一个30千瓦的微型燃气轮机为基础的CHP系统的动力性能

Dynamic Performance of a 30-kW Microturbine-Based CHP System

Dynamic Performance of a 30-kW Microturbine-Based CHP System

ASHRAE OR-05-9-2-2005 在500名士兵的军营里的,一个30千瓦的微型燃气轮机与余热回收的示范,

Demonstration of a 30-kW Microturbine with heat Recovery in a 500-Soldier Barracks

Demonstration of a 30-kW Microturbine with heat Recovery in a 500-Soldier Barracks

ASHRAE OR-05-9-1-2005 微型燃气轮机恢复控制的CHP系统的优化

A CHP System Optimization with Microturbine Recuperation Control

A CHP System Optimization with Microturbine Recuperation Control

ANSI/NFPA 295-2003 大火控制标准

(Will be renumbered NFPA 1143) Presents fundamental information to fire departments in the control of wildfire burning in natural and other vegatative fuels.

Standard for Wildfire Control

SY/T 6306-1997 易燃,可燃液体常压储罐的内外灭火

本标准是向有关消防人员介绍各种地上常压储罐和扑灭易燃、可燃液体储罐火灾的方法，其中包括应急计划，以便能制定一个完整的储罐灭火方案。本标准包括低闪点的易燃和可燃液体(如汽油)及高闪点的易燃和可燃液体(如润滑油和沥青)。 本标准根据石油工业在下列几个方面的经验提供切实可行的储罐灭火指南： a)卧式和立式常压储罐的灭火预案： b)易燃和可燃液体常压储罐内部及其周围火灾灭火战略和战术的各种预防措施和指南： c)用于扑灭储罐内外火灾的灭火剂。 本标准不包括如下内容： a)个人防护装备； b)带压气体火灾； c)非金属罐火灾。

Fighting fires in and around flammable and combustible liquid atmospheric storage tanks

GA 80-1994 自动喷水灭火系统 加速器的性能要求和试验方法

本标准规定了自动喷水灭火系统加速器的性能要求、试验方法和检验规则。 本标准适用于自动喷水灭火系统干式和干湿两用报替阀配套的加速器。

Performance requirements and test methods for sprinkler system accelerators